Handling Climate Change – Establishing Waste CO2 Management A View from Biotechnology

The biggest material flows induced by industry are realized in energy production. Coal, oil and gas as raw material streams are moved from their deposits to their further converting. From there product streams are branched out. However, the biggest material flow of this industry is waste CO₂ mobilized by chemical conversion from fossil deposits and released into the atmosphere. A waste management is urgently needed to reduce the amount of this flow, to neutralize its effects on environment and to establish applications yielding a return. Natural backflow of CO₂ from the atmosphere to the biosphere waits for completion by industrial methods in order to shift it to a dimension equalizing the finally unavoidable amount of waste CO₂ flow into the atmosphere.     

Dynamic X-ray radiography for the determination of foamed bitumen bubble area distribution

Foam bitumen is highly efficient in wetting and coating the surface of mineral aggregate at lower temperature. In order to improve understanding and characterization of the bitumen foam, X-ray radiography was used to study the formation and decay of bitumen foam in 2D representation. Image segmentation analysis was used to determine the foam bubble size distribution. In addition, the main parameters influencing foam bitumen formation, water content, and temperature were also investigated. The results demonstrate the influence of the water content on morphology and expansion of foam bitumen bubbles. Adding more water in the foaming process leads to quick collapse of bubbles and intensifies coalescence of foam bitumen. Higher temperatures produces larger bubbles at early foaming stage compared to lower temperature. Moreover the morphology of bubble formation depends on the types of bitumen used. An exponential function has been implemented to represent the bubble area distribution.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

4‐Biphenylalanine‐ and 3‐Phenyltyrosine‐Derived Hydroxamic Acids as Inhibitors of the JumonjiC‐Domain‐Containing Histone Demethylase KDM4A

Overexpression of the histone lysine demethylase KDM4A, which regulates H3K9 and H3K36 methylation states, has been related to the pathology of several human cancers. We found that a previously reported hydroxamate‐based histone deacetylase (HDAC) inhibitor (SW55) was also able to weakly inhibit this demethylase with an IC₅₀ value of 25.4 μm . Herein we report the synthesis and biochemical evaluations, with two orthogonal in vitro assays, of a series of derivatives of this lead structure. With extensive chemical modifications on the lead structure, also by exploiting the versatility of the radical arylation with aryldiazonium salts, we were able to increase the potency of the derivatives against KDM4A to the low‐micromolar range and, more importantly, to obtain demethylase selectivity with respect to HDACs. Cell‐permeable derivatives clearly showed a demethylase‐inhibition‐dependent antiproliferative effect against HL‐60 human promyelocytic leukemia cells.     

Fourier‐Transform Rheology of Unvulcanized,Carbon Black Filled Styrene Butadiene Rubber

Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ₀ < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I_3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I_3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ₀ = 0.32). The addition of up to 70 phr CB leads to an increase of I_3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I_3/1 is pronounced for CB levels above the percolation threshold.

     

Microstructure of the HMX‐Based PBX KS32 after Mechanical Loading

Non‐destructive X‐ray diffraction techniques were applied in order to monitor the influence of mechanical and shock‐loading on the microstructure of the plastic‐bonded high explosive KS32. The investigations uncovered damage to embedded coarse HMX crystals and to the binder system HTPB‐IPDI. Damage to the crystals occurred already during the kneading process in terms of deformation twinning. On higher loading between 400 MPa (static) and 480 MPa (dynamic) also crystal fracture was observed. The change in the binder structure was found after both static and dynamic loading, but not in the cured, differently kneaded samples. Moreover, the change in binder structure after dynamic loading was verified by dynamic mechanical analysis, and interpreted as a partial damage of the binder rubber shell around the explosive particles. The results are compared to literature data from imaging techniques.     

Influence of a cyclic butylene terephthalate oligomer on the processability and thermoelectric properties of polycarbonate/MWCNT nanocomposites

The thermoelectric properties of melt-processed nanocomposites consisting of a polycarbonate (PC) thermoplastic matrix filled with commercially available carboxyl (–COOH) functionalized multi-walled carbon nanotubes (MWCNTs) were evaluated. MWCNTs carrying carboxylic acid moieties (MWCNT-COOH) were used due the p-doping that the carboxyl groups facilitate, via electron withdrawing from the electron-rich π-conjugated system. Preliminary thermogravimetric analysis (TGA) of MWCNT-COOH revealed that the melt-mixing was limited at low temperatures due to thermal decomposition of the MWCNT functional groups. Therefore, PC was mixed with 2.5 wt% MWCNT-COOH (PC/MWCNT-COOH) at 240 °C and 270 °C. In order to reduce the polymer melt viscosity, a cyclic butylene terephthalate (CBT) oligomer was utilized as an additive, improving additionally the electrical conductivity of the nanocomposites. The melt rheological characterization of neat PC and PC/CBT blends demonstrated a significant decrease of the complex viscosity by the addition of CBT (10 wt%). Optical and transmission electron microscopy (OM, TEM) depicted an improved MWCNT dispersion in the PC/CBT polymer blend. The electrical conductivity was remarkably higher for the PC/MWCNT-COOH/CBT composites compared to the PC/MWCNT-COOH ones. Namely, the PC/MWCNT-COOH/CBT processed at 270 °C exhibited the best values with electrical conductivity; σ = 0.05 S/m, Seebeck coefficient; S = 13.55 μV/K, power factor; PF = 7.60 × 10⁻⁶μW/m K⁻², and thermoelectric figure of merit; ZT = 7.94 × 10⁻⁹. The PC/MWCNT-COOH/CBT nanocomposites could be ideal candidates for large-scale thermal energy harvesting, even though the presently obtained ZT values are still too low for commercial applications.