New Adhesion Promoters for Copper Leadframes and Epoxy Resin

New primer molecules have been synthesized to increase the adhesion strength between a copper leadframe and an epoxy molding compound in microelectronical devices. The coupling agents were preliminarily chemisorbed at the surface of copper plates via special binding groups like thiol, disulfide, ethylene diamine and phthalocyanine. Binding to the epoxy resin was performed via an hydroxyl group. Linear hydrocarbon spacers with various chain lengths connected the copper- and epoxy-binding groups. The self-assembled layers of the organic coupling agents at the metal surface were characterized by X-ray photoelectron spectroscopy. Thermogravimetric analysis was used to study the coating with respect to its corrosion oxidation inhibition. Shear tests clearly indicated that the coupling agents increase adhesion strength and are stable even in extreme humidity and thermal conditions in analogy to IPC-Level-1 pretreatment. Thus, delamination of the microelectronical packages was prevented.     

Synthesis,Characterization, and Reactivity of Lanthanide Complexes with Bulky Silylallyl Ligands

The synthesis of new lanthanide allyl complexes of enhanced stability and solubility in saturated hydrocarbons based on silyl-substituted allyl ligands is reported. Thus the potassium salt K(CH₂CHCHSiMe₃) ( 1 ) reacts with YCl₃ in tetrahydrofuran to give the tris-allyl complex Y(CH₂CHCHSiMe₃)₃ ( 2 ), while K(CH₂CHCHSiMe₂^tBu) ( 3 ) affords Y(CH₂CHCHSiMe₂^tBu)₃(THF)_1.5 ( 4 ). Slow re-crystallization of 4 from light petroleum in the presence of tert-butylcyanide led to multiple insertion to give the sec-amido complex Y{NHC(^tBu)(CH)₃SiMe₂^tBu}₂{η₂-NHC(^tBu)CH=CHCH₂SiMe₂^tBu)CH(CHCHSiMe₂^tBu)C^tBuNH}(THF)·(CH₃CH(Me)(CH₂)₂CH₃) ( 5 ), which was crystallographically characterized. The reaction of ScCl₃(THF)₃ with two equivalents of Li{1,3-C₃H₃(SiMe₃)₂} in tetrahydrofuran gives the bis-allyl complex {1,3-C₃H₃(SiMe₃)₂}₂Sc(μ-Cl)₂Li(THF)₂ ( 6 ), while the analogous reaction of K{1,3-C₃H₃(SiMe₃)₂} ( 7 ) with either LaCl₃ or YCl₃ in tetrahydrofuran affords the bis-allyl complexes MCl{1,3-C₃H₃(SiMe₃)₂}₂(THF)_x (8, M = La, x = 1; 9, M = Y, x = 0). An attempt to prepare the similar neodymium complex gave the mono-allyl complex NdI₂{1,3-C₃H₃(SiMe₃)₂}(THF)_1.25 ( 10 ). The reactions of 8 and 9 with triisobutyl aluminum in benzene-d₆ show allyl exchange between lanthanide and aluminum. Complexes 8 , 9 , and 10 have been tested with a variety of activator systems as catalysts for the polymerization of 1,3-butadiene.     

Near Field Blast Load

The momentum equation used by the author to describe the transferred momentum in the near field of detonating high explosive charges can be very well applied to the test results of steel disks at very near distances to detonating high explosive cylinders of the publication of Weaver and Walters⁽¹⁾.     

Photorheology of Fast UV‐Curing Multifunctional Acrylates

Summary: The fast photopolymerization of different multifunctional acrylates was analyzed by means of photorheology. The materials studied included a penta/hexaacrylate monomer and two different acrylated hyperbranched polymers. The sensitivity of the commercial rheometer was improved several‐fold, by a combination of an adaptive filter algorithm and improved data treatment, using powerful oversampling acquisition hardware. The novel set‐up was capable of monitoring up to a five orders of magnitude increase in shear modulus within short experiment timescales (about 10 s). The improvement in sensitivity and acquisition rate enabled the induction time, gelation, and vitrification of the multifunctional acrylates to be determined. In addition, the influence of UV intensity on stiffness build‐up within these materials was studied. In the case of the penta/hexaacrylate system, gelation and vitrification were detected as distinct events, in contrast to the second‐generation hyperbranched polyester, for which vitrification could not be identified. These findings are related to the difference in the glass transition temperature of the cured networks.

Absolute value of the complex shear modulus as a function of time for different acrylate monomers during UV curing.     

Shaped Charge Optimisation against Bulging Targets

Equivalent to the results against explosive reactive armour sandwiches also bulging armours can be better defeated by high performance precision shaped charges compared to so‐called robust shaped charges. The shaped charges with larger liner angles or thicker liners have less jet tip velocities which results in less residual penetration capabilities.     

Fourier‐Transform Rheology of Unvulcanized,Carbon Black Filled Styrene Butadiene Rubber

Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ₀ < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I_3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I_3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ₀ = 0.32). The addition of up to 70 phr CB leads to an increase of I_3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I_3/1 is pronounced for CB levels above the percolation threshold.

     

4‐Biphenylalanine‐ and 3‐Phenyltyrosine‐Derived Hydroxamic Acids as Inhibitors of the JumonjiC‐Domain‐Containing Histone Demethylase KDM4A

Overexpression of the histone lysine demethylase KDM4A, which regulates H3K9 and H3K36 methylation states, has been related to the pathology of several human cancers. We found that a previously reported hydroxamate‐based histone deacetylase (HDAC) inhibitor (SW55) was also able to weakly inhibit this demethylase with an IC₅₀ value of 25.4 μm . Herein we report the synthesis and biochemical evaluations, with two orthogonal in vitro assays, of a series of derivatives of this lead structure. With extensive chemical modifications on the lead structure, also by exploiting the versatility of the radical arylation with aryldiazonium salts, we were able to increase the potency of the derivatives against KDM4A to the low‐micromolar range and, more importantly, to obtain demethylase selectivity with respect to HDACs. Cell‐permeable derivatives clearly showed a demethylase‐inhibition‐dependent antiproliferative effect against HL‐60 human promyelocytic leukemia cells.     

Identification and Structure–Activity Relationship Studies of Small‐Molecule Inhibitors of the Methyllysine Reader Protein Spindlin1

The methyllysine reader protein Spindlin1 has been implicated in the tumorigenesis of several types of cancer and may be an attractive novel therapeutic target. Small‐molecule inhibitors of Spindlin1 should be valuable as chemical probes as well as potential new therapeutics. We applied an iterative virtual screening campaign, encompassing structure‐ and ligand‐based approaches, to identify potential Spindlin1 inhibitors from databases of commercially available compounds. Our in silico studies coupled with in vitro testing were successful in identifying novel Spindlin1 inhibitors. Several 4‐aminoquinazoline and quinazolinethione derivatives were among the active hit compounds, which indicated that these scaffolds represent promising lead structures for the development of Spindlin1 inhibitors. Subsequent lead optimization studies were hence carried out, and numerous derivatives of both lead scaffolds were synthesized. This resulted in the discovery of novel inhibitors of Spindlin1 and helped explore the structure–activity relationships of these inhibitor series.     

Separation of stat-copoly(styrene/2-methoxyethyl methacrylate) samples according to composition by gradient high-performance liquid chromatography

Statistical copolymers of styrene (S) and 2-methoxyethyl methacrylate (MEMA) (13–87 mass % of the latter monomer) were investigated by gradient HPLC on columns with either silica or CN-bonded phase packings. The samples were injected in THF solution. The starting eluent was in each case a nonsolvent (isooctane or mixtures of isooctane with THF and methanol). Separation was achieved by increasing the concentration of THF or methanol in the eluent. A calibration mixture of four copolymers (26, 49, 62, and 87% MEMA) was investigated according to the principles of chromatographic cross-fractionation (CCF) by size exclusion chromatography and subsequent gradient HPLC. The influence of molar mass on HPLC retention was small and, for the samples investigated by CCF, independent of copolymer composition. The composition effect on detector signal was also studied. At 230 nm wavelength and with MEMA content in the range between 20 and 40%, the effect was small and caused the average composition calculated from CCF results to deviate from the directly measured value by not more than 0.2 or 0.8% for the two copolymers investigated.     

New Adhesion Promoters for Copper Leadframes and Epoxy Resin

New primer molecules have been synthesized to increase the adhesion strength between a copper leadframe and an epoxy molding compound in microelectronical devices. The coupling agents were preliminarily chemisorbed at the surface of copper plates via special binding groups like thiol, disulfide, ethylene diamine and phthalocyanine. Binding to the epoxy resin was performed via an hydroxyl group. Linear hydrocarbon spacers with various chain lengths connected the copper- and epoxy-binding groups. The self-assembled layers of the organic coupling agents at the metal surface were characterized by X-ray photoelectron spectroscopy. Thermogravimetric analysis was used to study the coating with respect to its corrosion oxidation inhibition. Shear tests clearly indicated that the coupling agents increase adhesion strength and are stable even in extreme humidity and thermal conditions in analogy to IPC-Level-1 pretreatment. Thus, delamination of the microelectronical packages was prevented.