Double Layer Coatings: A New Technique for Maintaining Physico-Chemical Characteristics and Antioxidant Properties of Dragon Fruit During Storage

A double layer coating was evaluated for maintenance of quality of dragon fruit during storage at 10?±?2 °C and 80?±?5 % RH for 28 days. Significant differences (p?<?0.05) were observed between control and the treated fruit. However, a double layer coating with 600 nm droplet size?+?1.0 % conventional chitosan showed promising results in all the tested parameters, while the fruit treated with 1,000 nm droplet size?+?1.0 % conventional chitosan showed some negative effects on fruit surface. Increase in weight loss was 12.0 % in fruit treated with 600 nm droplet size and 1.0 % conventional chitosan as compared to the control. Antioxidants and gaseous analysis also proved the efficacy of double layer coatings with 600 nm droplet size?+?1.0 % conventional chitosan. Thus it can be concluded from the present investigation that double layer coating could be used for maintaining quality in dragon fruit for up to 28 days without any off-flavours.     

Drying and color characteristics of coriander foliage using convective thin-layer and microwave drying

Heat sensitive properties (aromatic, medicinal, color) provide herbs and spices with their high market value. In order to prevent extreme loss of heat sensitive properties when drying herbs, they are normally dried at low temperatures for longer periods of time to preserve these sensory properties. High energy consumption often results from drying herbs over a long period. Coriander (Coriandrum sativum L., Umbelliferae) was dehydrated in two different drying units (thin layer convection and microwave dryers) in order to compare the drying and final product quality (color) characteristics. Microwave drying of the coriander foliage was faster than convective drying. The entire drying process took place in the falling rate period for both microwave and convective dried samples. The drying rate for the microwave dried samples ranged from 42.3 to 48.2% db/min and that of the convective dried samples ranged from 7.1 to 12.5% db/min. The fresh sample color had the lowest L value at 26.83 with higher L values for all dried samples. The results show that convective thin layer dried coriander samples exhibited a significantly greater color change than microwave dried coriander samples. The color change index values for the microwave dried samples ranged from 2.67 to 3.27 and that of the convective dried samples varied from 4.59 to 6.58.     

Spatial Indexing for Video Databases

Spatial reasoning techniques based on 2D string systems have been successfully applied to indexing pictorial databases. We demonstrate how similar techniques may be extended to represent video sequences, and how this representation may be compressed. Query schemes for both single frame queries, and full subsequence queries are presented. The strength of these query schemes is that the query process does not require the expansion of the compressed notation during query evaluation.     

Synthesis and characterization of olivine LiNiPO4 for aqueous rechargeable battery

LiNiPO₄ belongs to a family of olivine type compounds, with members LiMPO₄ where M = Fe, Mn, Co or Ni are transition metals. The lithium nickel phosphate was prepared and characterized in order to evaluate a new potential cathode material for our ongoing research in aqueous rechargeable batteries. Annealing the final product is critical in obtaining the stoichiometric LiNiPO₄ pure phase; conventional cooling to a room temperature leads to an indication of Li₃PO₄ and NiO secondary phases as impurities. The synchrotron infrared radiation (SR-IR) as a source for IR spectroscopy pins down the differences in the chemical bonding for annealed and conventional cooled LiNiPO₄ samples. The cyclic voltammetric and galvanostatic studies showed annealed LiNiPO₄ is electrochemically active from which lithium ions can be de-intercalated during oxidation process leading to an amorphous NiPO₄ and a minor product of nickel(II) hydroxide (β-NiOOH). During subsequent reduction, lithium ions are not fully intercalated, however, the structure is reversible and adequate for multiple cycles. The high potential in LiNiPO₄ looks to be very attractive in terms of high energy density, given the efficiency is improved.     

Solid state synthesis of nano-mineral particles

Many researchers in academia and industries are interested in reducing particle sizes from few sub-micrometers to nano-meter levels. These nano-particles find application in several areas including ceramics, paints, cosmetics, microelectronics, sensors, textiles and biomedical, etc. This article reviews the present state of the art for solid state synthesis of mineral nano-particles by wet milling, including their operating variables such as ball size, solid mass fraction and suspension stability. This article concludes and recommends with a critical discussion of nano-particles synthesis and a few common strategies to overcome stability issues.     

Ferroelectric Materials for Microwave Tunable Applications

A review of the properties of ferroelectric materials that are relevant to microwave tunable devices is presented: we discuss the theory of dielectric response of tunable bulk materials and thin films; the experimental results from the literature and from own work are reviewed; the correspondence between the theoretical results and the measured properties of tunable materials is critically analyzed; nominally pure, real (defected), and composite bulk materials and thin films are addressed. In addition, techniques for characterization of tunable ferroelectrics and applications of these materials are briefly presented.     

Triple Metal Surrounding Gate Junctionless Tunnel FET Based 6T SRAM Design for Low Leakage Memory System

Silicon - The promising capability of Triple Material Surrounding Gate Junctionless Tunnel FET (TMSG – JL – TFET) based 6&nbsp;T SRAM structure is demonstrated by employing...     

Influence of Substrate Temperature on the Properties of Cobalt Oxide Thin Films Prepared by Nebulizer Spray Pyrolysis (NSP) Technique

Cobalt oxide thin films are prepared by the nebulizer spray pyrolysis technique using cobalt chloride as the precursor material. The structural, optical, morphological and electrical properties are investigated as a function of substrate temperature (300–450 °C). The X-ray diffraction (XRD) analysis reveals that all the films are polycrystalline in nature, having cubic structure with preferential orientation along the (111) plane. The optical spectra show that the films are transparent (68 %) in the IR region. The optical band gap values are calculated for different substrate temperature. Photoluminescence (PL) spectra of the films indicate the presence of indigo, blue and green emission peaks with an ultraviolet emission peak centered around 368nm. SEM images reveals small sphere-like structures for the prepared Co3O4 films. The maximum conductivity obtained is 1.48 x 10?3 S/cm at 350 °C. The activation energy varies between 0.039 and 0.138 eV for the substrate temperature variation from 300-450 Q°C.     

Identification in the presence of classes of unmodeled dynamics andnoise

Identification involves obtaining a model from an a priori chosen model class(es) using finite corrupted data. The corruption may be due to several reasons ranging from noise to unmodeled dynamics, since the real system may not belong to the model class. Two popular approaches-probabilistic and set-membership identification-deal with this problem by imposing temporal constraints on the noise sample paths. We differentiate between the two sources of error by imposing different types of constraints on the corruption. If the source of corruption is noise, we model it by imposing temporal constraints on the possible realizations of noise. On the other hand, if it results from unmodeled dynamics informational constraints are imposed. Contrary to probabilistic identification where the parameters of the identified model converge to the true parameters in the presence of noise, current results in set-membership identification do not have this convergence property. Our approach leads to bridging this gap between probabilistic and set-membership identification when the source of corruption is noise. For the case when both unmodeled dynamics and noise are present, we derive consistency results for the case when the unmodeled dynamics can be described either by a linear time-invariant system or by a static nonlinearity