Modeling chip formation with grooved tools

A slip-line field model for orthogonal cutting with a tool containing a groove-like feature on its rake face is proposed. Primary contact at the tool-chip interface is taken to be plastic. Based on experimental observations, it is assumed that the chip flows into the groove, and is forced to curl by Coulomb friction contact with the groove back wall. Solutions obtained for different groove geometries, groove positions relative to the cutting edge, rake angles and tool-chip interface friction using the matrix operator method are presented and discussed. The calculated results are in general agreement with experimental observations. It is found that the model can be formulated so that it can be used to predict the cutting geometry for obstruction-type chip breakers as well.     

Enhanced α-Mn2O3 nanorods synthesized by one-pot hydrothermal route for supercapacitors

Journal of Materials Science: Materials in Electronics - Pseudo-capacitors are the emerging energy storage devices which forms a bridge between batteries and conventional capacitors. In the present...     

Heat transfer enhancement of concentrated solar absorber using hollow cylindrical fins filled with phase change material

A concentrated solar absorber with finned phase change materials was experimentally studied using a Scheffler type parabolic dish concentrator. The absorber's inner surface was fixed with hollow cylindrical containers filled with phase change material (PCM) for heat transfer augmentation. The absorber's selected PCM was acetanilide (Melting point of 116 °C)—the cylindrical capsules protruding into the fluid side to create turbulence and mixing and acting as fins. The absorber surface temperature was observed to be about 130–150 °C during the outdoor tests while passing fluid through the absorber. The fluid flow rate varied from 60 to 100 kg/h during the outdoor experiments. The peak energy and exergy efficiency of parabolic dish collector (PDC) at the fluid flow rate of 80 kg/h with PCM integrated solar absorber was found to be about 67.88% and 6.96%, respectively. The integration of cylindrical PCM containers resulted in more heat transfer augmentation in the solar absorbers. The optimized solar absorber could be suitable for various applications like steam generation, biomass gasification, space heating, and hydrogen generation.     

A comprehensive review on bioinspired solar photovoltaic cells

Researchers have derived inspiration from the biophotosynthetic structures in nature and have started to synthesize the modified bioinspired solar cells copying the evolved organic and inorganic material properties. One of the highlighted examples of bioinspired photo voltaic (PV) cells is the astonishing achievement of an increase in the absorption of integrated sunlight waves in unpatterned solar cells simulated from the wings of the butterfly. Further, deployment possibilities of incorporating flexible cells on flat or curved surfaces for optimizing performance are also under progress. This article mainly discusses the recent concepts of bioinspired solar cells at the research and development level with the prospects and challenges that lie ahead in the upcoming field of photovoltaic renewable energy cell technology. Different potential materials found suitable for bioinspired solar cells construction are reviewed with their particular challenges.     

Effect of Pasteurization and Retort Processing on Spectral Characteristics,Morphological, Thermal,Physico‐Mechanical,Barrier and Optical Properties of Nylon‐Based Food Packaging Materials

The effect of pasteurization and retort processing on spectral, morphological, thermal, physico‐mechanical, barrier and optical properties of three different packaging materials viz., PP/N6/PP, PET/N6/cPP and SiO_x‐PET/N6/cPP were studied. These packaging materials were packed with distilled water, which acted as a food simulant. Subsequently, these pouches were subjected to different thermal processing conditions such as pasteurization and retort processing. Both the processing techniques found to have retained the mechanical properties of all packaging materials. Water vapour transmission rate (WVTR) and oxygen transmission rate (OTR) of nylon‐based combinations were increased after processing. Gloss found to decrease invariably irrespective of the material and increases with the severity of the treatment. XRD diffractogram shows changes in crystal structure as a result of thermal processing, and SEM analysis shows the crystal fragmentation. Absorption of water by the amide group of nylon 6 was observed, which could be a reason for the increase in OTR and WVTR. Copyright © 2014 John Wiley & Sons, Ltd.     

Solution combustion synthesis of (La,K) FeO<Subscript>3</Subscript> orthoferrite ceramics: structural and magnetic property studies

Polycrystalline La_1−x K _x FeO₃ ceramic oxides were synthesized by a solution combustion process using glycine as a fuel. The synthesized ceramic powders were characterized for structural features applying characterization techniques such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and magnetic and optical property studies applying characterization techniques such as SQUID magnetometer and diffuse reflectance (DR). The changes in magnetic properties are correlated to changes in structural features resulting from Rietveld structural refinement.     

Asiatic acid prevents lipid peroxidation and improves antioxidant status in rats with streptozotocin-induced diabetes

Oxidative stress is a common pathogenesis of diabetes mellitus and asiatic acid (AA) plays an important role in ameliorating those difficulties. The present study was designed the protective effects of AA on altered lipid peroxidation products, enzymic and nonenzymic antioxidants in streptozotocin (STZ)-induced diabetic rats. Diabetes was induced in experimental rats by single dose STZ (40 mg/kg b.w.) injection. Diabetic rats showed significantly increased levels of plasma glucose, thiobarbituric acid reactive substances, lipid hydroperoxides, aspartate aminotransferase, alanine aminotransferase, bilirubin, creatine kinase, urea, uric acid, creatinine and decreased levels of plasma insulin. The activities of enzymatic antioxidants such as superoxide dismutase, catalase, glutathione peroxidase and glutathione-S-transferase and the levels of non-enzymatic antioxidants such as vitamin C, vitamin E and reduced glutathione were decreased in diabetic rats. Oral treatment with AA (20 mg/kg b.w.) showed near normalized levels of plasma glucose, insulin, lipid peroxidation products, enzymatic and nonenzymatic markers in diabetic rats. The results demonstrate that AA possesses potent antioxidant effect comparable with glibenclamide in improving antihyperglycemia and attenuating antioxidant status in diabetic rats.     

In situ Diamond Anvil Cell–Raman Spectroscopy and Nanoindentation Study of the Pressure‐Induced Phase Transformation in Pure and Zinc‐Doped β‐Eucryptite

β‐eucryptite (LiAlSiO₄), a member of the family of lithium aluminum silicates, is known to undergo a reversible pressure‐induced phase transformation at ~0.8 GPa to ε‐eucryptite. This study correlates the results between two techniques, in situ diamond anvil cell–Raman spectroscopy and nanoindentation experiments, to explore how doping (substituting Zn for Li) influences this pressure‐induced phase transformation. Diamond anvil cell tests carried up to 3 GPa hydrostatic stress under Raman spectroscopy were compared with nanoindentation results, which provide a more localized, multiaxial stress state. The results indicate that the magnitude of hysteresis observed (difference between the pressures required for the forward and reverse transformation) is lower for Zn‐doped β‐eucryptite; however, the onset of the phase transformation is unchanged by doping with Zn. Furthermore, calculations of activation volume from nanoindentation experiments yield similar values (~0.1 nm³) for pure and Zn‐doped β‐eucryptite, suggesting that the nucleation event that establishes the onset of the phase transformation is the same for both materials.     

A Theory of Minimal 3D Point to 3D Plane Registration and Its Generalization

Registration of 3D data is a key problem in many applications in computer vision, computer graphics and robotics. This paper provides a family of minimal solutions for the 3D-to-3D registration problem in which the 3D data are represented as points and planes. Such scenarios occur frequently when a 3D sensor provides 3D points and our goal is to register them to a 3D object represented by a set of planes. In order to compute the 6 degrees-of-freedom transformation between the sensor and the object, we need at least six points on three or more planes. We systematically investigate and develop pose estimation algorithms for several configurations, including all minimal configurations, that arise from the distribution of points on planes. We also identify the degenerate configurations in such registrations. The underlying algebraic equations used in many registration problems are the same and we show that many 2D-to-3D and 3D-to-3D pose estimation/registration algorithms involving points, lines, and planes can be mapped to the proposed framework. We validate our theory in simulations as well as in three real-world applications: registration of a robotic arm with an object using a contact sensor, registration of planar city models with 3D point clouds obtained using multi-view reconstruction, and registration between depth maps generated by a Kinect sensor.