Optimal Sensor Networks for Area Monitoring Using Rotating and Beam Sensors

We consider the problem of monitoring the Euclidean plane using rotating sensors with detection sectors and beam sensors. We assume that intruders can appear anywhere at any time and move arbitrarily fast, and may have full knowledge of the sensor network. We require that such intruders be detected within a finite amount of time. We give an optimal network for this problem consisting of a combination of rotating sensors of angle 0 and beam sensors that uses the minimum number of both types of sensors. We show a trade-off between the density of beam sensors needed and the angle of the detection sector of the rotating sensors. Secondly, we give a family of sensor networks using only rotating sensors for the same problem, that demonstrate a trade-off between the detection time and the density of rotating sensors used. We show that the density of rotating sensors required in this case can be significantly reduced by increasing the angle of detection sectors. Finally, we show that our results on the infinite plane can be used to derive sensor networks that monitor some finite regions using a density of sensors that is asymptotically the same, or close to that of the infinite plane case.     

Corrosion resistance of phosphate coatings obtained by cathodic electrochemical treatment: Role of anode–graphite versus steel

The formation of phosphate coatings by cathodic electrochemical treatment using graphite and steel anodes and evaluation of their corrosion resistance is addressed in this paper. The type of anode used, graphite/steel, has an obvious influence on the composition of the coating, resulting in zinc–zinc phosphate composite coating with graphite anode and zinc–iron alloy–zinc phosphate–zinc–iron phosphate composite coating with steel anode. The corrosion resistance of the coating is found to be a function of the composition of the coating. The deposition of zinc/zinc–iron alloy along with the zinc phosphate/zinc and zinc–iron phosphate using graphite/steel anodes has caused a cathodic shift in the E_corr compared to uncoated mild steel substrates. The i_corr values of these coatings is very high. EIS studies reveal that zinc/zinc–iron alloy dissolution is the predominant reaction during the initial stages of immersion. Subsequently, the formation of zinc and iron corrosion products imparts resistance to the charge transfer process and increases the corrosion resistance with increase in immersion time. The corrosion products formed might consist of oxides and hydroxychlorides of zinc and iron. The study suggests that cathodic electrochemical treatment could be effectively utilized to impart the desirable characteristics of the coating by choosing appropriate anode materials, bath composition and operating conditions.     

Differentiating seawater and groundwater sulfate attack in Portland cement mortars

The study reported in this article deals with understanding the physical, chemical and microstructural differences in sulfate attack from seawater and groundwater. Portland cement mortars were completely immersed in solutions of seawater and groundwater. Physical properties such as length, mass, and compressive strength were monitored periodically. Thermal analysis was used to study the relative amounts of phases such as ettringite, gypsum, and calcium hydroxide, and microstructural studies were conducted by scanning electron microscopy. Portland cement mortars performed better in seawater solution compared to groundwater solution. The difference in performance could be attributed to the reduction in the quantity of the expansive attack products (gypsum and ettringite). The high Cl concentration of seawater could have played an important role by binding the C₃A to form chloroaluminate compounds, such as Friedel's salt (detected in the microstructural studies), and also by lowering the expansive potential of ettringite. Furthermore, the thicker layer of brucite forming on the specimens in seawater could have afforded better protection against ingress of the solution than in groundwater.     

Time resolved study of oriented crystallisation of poly(lactic acid) during rapid tensile deformation

Poly(l-lactic acid) with 4% d-lactic acid comonomer has been drawn in the amorphous state at 80, 90, 100, 110 and 120 °C at an extension rate of 4 s⁻¹ while simultaneously recording WAXS and SAXS patterns at intervals of 0.12 s. At 80, 90 and 100 °C, crystallisation is very rapid (1-4 s⁻¹) and follows a first order transformation process to give highly oriented crystals. SAXS patterns were barely detectable at these temperatures despite fractional crystallinity of ∼0.2. At 110 and 120 °C, crystallisation was very slow (∼0.01 s⁻¹) and gave rise to crystals with a lower degree of orientation. After eventual crystallisation at 120 °C, a two-point SAXS pattern develops with narrow lateral spread, suggesting ‘shish kebab’ morphology. When the 80 °C drawn sample was annealed at 120 °C, a strong four point SAXS pattern develops. The change in drawing and crystallisation behaviour at higher draw temperature is attributed to the onset of chain retraction relaxation processes. The WAXS fibre pattern after annealing shows sampling on intermediate layer lines that is consistent with the α crystal form with a 10₃ helix. However, prior to annealing, sampling indicates a different, less defined helical configuration.     

Particle-fluid heat transfer and dispersion in fluidised beds

The dynamic response of a gas fluidised bed has been measured for a range of particle sizes of lead glass ballotini and a range of particle Reynolds numbers. A dispersion model has been formulated that includes the effects of gas and particle mixing, fluid-to-particle heat transfer and intraparticle thermal conductivity, and the dynamic thermal response in theory has been found by solving the partial differential equations in the Laplace transform domain. The coefficient of thermal dispersion, the particle-to-fluid heat transfer coefficient and the intraparticle thermal conductivity have been found for the experimental response by non-linear regression. The coefficient of axial dispersion was found to be large and the particle to fluid heat transfer coefficients agreed with an established correlation for fixed and fluidised beds. The intraparticle thermal conductivity agreed with literature values for lead glass, the estimates showed no trend with flowrate, and the standard deviation of the estimate was three times smaller than the deviation found from similar experiments in fixed beds.     

IEVCA: An efficient image encryption technique for IoT applications using 2-D Von-Neumann cellular automata

Multimedia Tools and Applications - Present era is marked by exponential growth in transfer of multimedia data through internet. Most of the Internet-of-Things(IoT) applications send images to...     

Games to induce specified equilibria

Media access protocols in wireless networks require each contending node to wait for a backoff time, chosen randomly from a fixed range, before attempting to transmit on a shared channel. However, nodes acting in their own selfish interest may not follow the protocol. In this paper, a static version of the problem is modeled as a strategic game played by non-cooperating, rational players (the nodes). The objective is to design a game which exhibits a unique, a priori mixed-strategy Nash equilibrium. In the context of the media access problem, the equilibrium of the game would correspond to nodes choosing backoff times randomly from a given range of values, according to the given distribution. We consider natural variations of the problems concerning the number of actions available to the players and show that it is possible to design such a game when there are at least two players that each have the largest number of possible actions among all players. In contrast, we show that if there are exactly two players with different number of actions available to them, then it becomes impossible to design a strategic game with a unique such Nash equilibrium.     

Human Perception of Audio-Visual Synthetic Character Emotion Expression in the Presence of Ambiguous and Conflicting Information

Computer simulated avatars and humanoid robots have an increasingly prominent place in today's world. Acceptance of these synthetic characters depends on their ability to properly and recognizably convey basic emotion states to a user population. This study presents an analysis of the interaction between emotional audio (human voice) and video (simple animation) cues. The emotional relevance of the channels is analyzed with respect to their effect on human perception and through the study of the extracted audio-visual features that contribute most prominently to human perception. As a result of the unequal level of expressivity across the two channels, the audio was shown to bias the perception of the evaluators. However, even in the presence of a strong audio bias, the video data were shown to affect human perception. The feature sets extracted from emotionally matched audio-visual displays contained both audio and video features while feature sets resulting from emotionally mismatched audio-visual displays contained only audio information. This result indicates that observers integrate natural audio cues and synthetic video cues only when the information expressed is in congruence. It is therefore important to properly design the presentation of audio-visual cues as incorrect design may cause observers to ignore the information conveyed in one of the channels.     

L-thiocitrulline. A stereospecific, heme-binding inhibitor of nitric-oxide synthases

Nitric-oxide synthase (NOS) catalyzes the oxidation of L-arginine to citrulline and nitric oxide (NO). The enzyme is inhibited by a variety of N omega-monosubstituted L-arginine analogs, and some of these compounds are useful in reversing pathologies associated with the overproduction of NO (e.g. the hypotension of septic shock). We report here that L-thiocitrulline (gamma-thioureido-L-norvaline) is a potent, stereospecific inhibitor of the constitutive brain and endothelial isoforms of NOS as well as the isoform induced in vascular smooth muscle cells by lipopolysaccharide and interferon-gamma. Steady state kinetic studies show L-thiocitrulline inhibition is competitive with L-arginine (Ki approximately 4-20% of KArgm), indicating that initial binding is as a substrate/product analog. In contrast to L-arginine and N omega-methyl-L-arginine, the prototypic NOS inhibitor, L-thiocitrulline binding elicits a "Type II" difference spectrum, indicating a high spin to low spin transition of the iron in the heme cofactor. This finding suggests that L-thiocitrulline is contributing the sixth ligand to heme iron, probably through the thioureido sulfur. Such interaction with heme iron neither stimulates nor inhibits the direct flavin-mediated cytochrome c reduction activity of the enzyme, but it does inhibit heme-dependent superoxide formation. In vivo, L-thiocitrulline is a potent pressor agent in both normal and endotoxemic rats, the latter finding suggesting utility in treating the hypotension of septic shock.     

Frequency regularization of a linked wind–diesel system using dual structure fuzzy with ultra-capacitor

Microgrids (μ-grids) are gaining increased interest around the world for supplying cheap and clean energy. In this paper, a μ-grid comprising a wind turbine generator (WTG) and diesel generator (DG) is considered. It is one of most practical and demanding systems suitable for the present energy crisis in isolated or rural areas. However, wind energy is intermittent in nature while load demand changes frequently. Therefore, a µ-grid can experience large frequency and power fluctuations. The speed governor of the DG tries to minimize the frequency and power deviations in µ-grid though its operation is slow and cannot adequately minimize system deviations. The paper proposes a novel arrangement based on a dual structured fuzzy (DSF) whose structure changes according to the switching limit with a reduced rule base. It has the capability to switch between proportional and integral actions and hence improves the frequency regularization of the μ-grid. The proposed strategy is tested in a μ-grid and the results considering step load alteration, load alteration at different instants of time, nonstop changing load request are compared with some of the well published methods to validate the effectiveness and simplicity of the present design. In addition, it shows that ultra-capacitor establishment in a μ-grid has a positive impact in minimizing system deviations with DSF for the studied cases.