Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.     

Kinetics of small fatigue cracks in steel during cyclic loading

The kinetics of development of fatigue microcracks in a high-strength 08Kh14AN4MD steel is studied when a cantilever specimen with several notches is subjected to rotational bending tests. The specific feature of the tests consists in the fact that, when the specimen is loaded at a constant load, different stress amplitudes are realized in different notches. As a result, after the sample has failed across the section with the maximum stress, a longitudinal polished section of the specimen contains fatigue cracks having nucleated in the mouths of the other notches at lower stress amplitudes. A relation between inflection points in the fatigue curve and the conditions of local and developed yield in a notch has been established. Fatigue fracture mechanisms at a superhigh number of loading cycles are studied, and their relation to the structure near a crack is found. A rapid method for estimating the fatigue limit at a superhigh number of loading cycles is proposed.     

Micromechanism of corrosion fracture of the plates of heat exchangers

We have studied the micromechanism of corrosion fracture of heat-transfer plates of a heat exchanger. The operation of heat exchangers under conditions of contamination of the plates with a sediment from water leads to their local corrosion under the sediment. The conditions of operation of the heat exchangers being equal, heat-transfer plates made of AiSi316Ti steel worked 2.36 times as long as those of AiSi304L steel. The corrosion fracture of plates under the sediment began from pitting initiation near nonmetallic inclusions of a certain nature. Afterwards, these pittings built up into corrosion spots by the mechanism of stress corrosion and hydrogen embrittlement. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 1, pp. 110–116, January–February, 2007.     

Refractory Ceramics Based on Local Materials

A technology for producing ShA and ShB refractories uses high-melting clays from the Rostov Region and high-alumina technogenic waste. The effect of the chamotte-to-clay ratio, the granulometric composition, and the additive introduction method on the properties of products is investigated.__________Translated from Steklo i Keramika, No. 1, pp. 15 – 16, January, 2005.     

Tunneling spectroscopy of palladium-barium emitters

The surface of a palladium-barium cathode was studied using scanning probe microscopy techniques. Data from the tunneling spectroscopy showed the pattern of the electron work function distribution over a microscopic region on the emitter surface. This pattern is compared to the distribution of various phases in the palladium-barium alloy employed.     

Organizing the production of heat-insulating inserts for ingot-mold hot tops

The Zlatoust Metallurgical Plant has developed a technology that employs semi-dry pressing to make two-layer (composite) heat-insulating inserts for ingot-mold hot tops. The working layer is made of a mixture of materials based on quartz sand, while the insulating layer is based on foamed vermiculate. The binders are sodium silicate solution and commercial lignosulfonate with a density of 1.12–1.20 g/cm³.     

Optimal systems for moving-object detection and classification

Translated from Kibernetika i Sistemnyi Analiz, No. 5, pp. 137–145, September–October, 1993.     

Influence of the purity of the starting materials on the recording of dynamic holograms in Bi12TiO20 crystals

The parameters of Bi₁₂TiO₂₀ crystals grown with bismuth oxide of different degrees of purity were measured by a holographic recording technique in an external ac electric field and were compared with a crystal specially doped with chromium. Various crystal parameters such as the diffusion length of the photoexcited carriers and the Debye screening length were determined. It was found that the absorption spectrum of the material and the holographic recording efficiency were strongly influenced by light chromium doping and by insufficient purity of the starting mixture. Pis’ma Zh. Tekh. Fiz. 23, 27–32 (March 12, 1997)     

The Air is Always Cleaner on the Other Side: Race,Space, and Ambient Air Toxics Exposures in California

Abstract: Environmental justice advocates have recently focused attention on cumulative exposure in minority neighborhoods due to multiple sources of pollution. This article uses U.S. EPA's National Air Toxics Assessment (NATA) for 1996 to examine environmental inequality in California, a state that has been a recent innovator in environmental justice policy. We first estimate potential lifetime cancer risks from mobile and stationary sources. We then consider the distribution of these risks using both simple comparisons and a multivariate model in which we control for income, land use, and other explanatory factors, as well as spatial correlation. We find large racial disparities in California's “riskscape” as well as inequalities by other factors and suggest several implications for environmental and land use policy.