Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

Single frame correction of motion artifacts in PMD-based time of flight cameras

One of the leading time of flight imaging technologies for depth sensing is based on Photonic Mixer Devices (PMD). In PMD sensors each pixel samples the correlation between emitted and received light signals. Current PMD cameras compute eight correlation samples per pixel in four sequential stages to obtain depth with invariance to signal amplitude and offset variations. With motion, PMD pixels capture different depths at each stage. As a result, correlation samples are not coherent with a single depth, producing artifacts. We propose to detect and remove motion artifacts from a single frame taken by a PMD camera. The algorithm we propose is very fast, simple and can be easily included in camera hardware. We recover depth of each pixel by exploiting consistency of the correlation samples and local neighbors of the pixel. In addition, our method obtains the motion flow of occluding contours in the image from a single frame. The system has been validated in real scenes using a commercial low-cost PMD camera and high speed dynamics. In all cases our method produces accurate results and it highly reduces motion artifacts.     

Preparation and properties of high molecular weight poly(1-germa-) or poly(1-sila-cis-pent-3-enes)

High molecular weight poly(1,1-dimethyl-1-germa-cis-pent-3-ene), poly(1,1-diphenyl-1-germa-cis-pent-3-ene), poly(1,1-dimethyl-1-sila-cis-pent-3-ene), and poly(1-methyl-1-phenyl-1-sila-cis-pent-3-ene) have been prepared. The thermal stability of these polymers is found to increase with their molecular weight.     

Effect of refining on the phenolic composition of crude olive oils

By definition, virgin olive oil is consumed unrefined, although a great proportion of the olive oil produced has to be refined to render it edible. Phenolic compounds are among the substances eliminated during the refining process; in the present work these were characterized by HPLC, and their evolution during the different refining steps was studied. The complete refining process removed most polyphenols from oils, but the behavior of individual compounds at each step also was observed. o-Diphenols (hydroxytyrosol, catechol, and hydroxytyrosol acetate) and flavonoids (luteolin and apigenin) were eliminated first during the alkaline treatment. Tyrosol and 4-ethylphenol remained in the oil until the deodorization step. A large amount of phenolic compounds was discovered in the refining by-products such as soapstocks and deodorization distillates. In the latter streams, the concentrations of tyrosol and 4-ethylphenol reached up to 149 and 3720 mg/kg by-product, respectively. This high level of 4-ethylphenol and its well-known strong off-odor can interfere during further processing of the deodorization distillates, and this must be taken into account when deciding what is to become of them. Similarly, the results of this work open the possibility of recovering phenolic compounds from the “second centrifugation olive oils” by adding a new washing step prior to the refining process. By including this new step, the most polar polyphenols, hydroxytyrosol and tyrosol, will diffuse from oil to water and a concentration of up to 1400 mg/L of hydroxytyrosol may be achieved.     

Ambient and High-Temperature Stable Fracture Tests in Ceramics: Applications to Yttria-Partially-Stabilized Zirconia

A new technique that provides stable fracture tests in brittle ceramic materials at room and at high temperature is presented. This technique uses the crack mouth opening displacement signal from a laser extensometer to feed the servo control of a hydraulic testing machine. In this way it is possible to obtain—in addition to the fracture toughness—the fracture energy and the R -curve, in a single test.     

I3WSN: Industrial Intelligent Wireless Sensor Networks for indoor environments

Sensor Web Enablement (SWE) technologies have been successfully applied to a great variety of outdoor scenarios but, in practical terms, little effort has been applied for indoor environments, and even less in the field of industrial applications. This article presents an intelligent SWE application for an indoor and industrial scenario, with the aim of improving and increasing the levels of human safety. The base low-level architecture is built on top of wireless sensor networks (WSN) connected to a Sensor Observation Service (SOS). Higher layers in the architecture include services that make real time decisions based on the collected data. Both simulation and experimental results are presented. The paper shows the viability of our approach in terms of performance, scalability, modularity and safety.     

HumanTop: a multi-object tracking tabletop

In this paper, a computer vision based interactive multi-touch tabletop system called HumanTop is introduced. HumanTop implements a stereo camera vision subsystem which allows not only an accurate fingertip tracking algorithm but also a precise touch-over-the-working surface detection method. Based on a pair of visible spectra cameras, a novel synchronization circuit makes the camera caption and the image projection independent from each other, providing the minimum basis for the development of computer vision analysis based on visible spectrum cameras without any interference coming from the projector. The assembly of both cameras and the synchronization circuit is not only capable of performing an ad-hoc version of a depth camera, but it also introduces the recognition and tracking of textured planar objects, even when contents are projected over them. On the other hand HumanTop supports the tracking of sheets of paper and ID-code markers. This set of features makes the HumanTop a comprehensive, intuitive and versatile augmented tabletop that provides multitouch interaction with projective augmented reality on any flat surface. As an example to exploit all the capabilities of HumanTop, an educational application has been developed using an augmented book as a launcher to different didactic contents. A pilot study in which 28 fifth graders participated is presented. Results about efficiency, usability/satisfaction and motivation are provided. These results suggest that HumanTop is an interesting platform for the development of educational contents.     

Nonionic water‐soluble polymer: Preparation,characterization, and application of poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) as a polychelatogen

The free‐radical copolymerization of water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) was carried out with a feed monomer ratio of 75:25 mol %, and the total monomer concentration was 2.67M. The synthesis of the copolymer was carried out in dioxane at 70°C with benzoyl peroxide as the initiator. The copolymer composition was obtained with elemental analysis and ¹H‐NMR spectroscopy. The water‐soluble polymer was characterized with elemental analysis, Fourier transform infrared, ¹H‐ and ¹³C‐NMR spectroscopy, and thermal analysis. Additionally, viscosimetric measurements of the copolymer were performed. The thermal behavior of the copolymer and its complexes were investigated with differential scanning calorimetry (DSC) and thermogravimetry techniques under a nitrogen atmosphere. The copolymer showed high thermal stability and a glass transition in the DSC curves. The separation of various metal ions by the water‐soluble poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) reagent in the aqueous phase with liquid‐phase polymer‐based retention was investigated. The method was based on the retention of inorganic ions by this polymer in a membrane filtration cell and subsequent separation of low‐molar‐mass species from the polymer/metal‐ion complex formed. Poly(1‐vinyl‐2‐pyrrolidone‐co‐hydroxyethylmethacrylate) could bind metal ions such as Cr(III), Co(II), Zn(II), Ni(II), Cu(II), Cd(II), and Fe(III) in aqueous solutions at pHs 3, 5, and 7. The retention percentage for all the metal ions in the polymer was increased at pH 7, at which the maximum retention capacity could be observed. The interaction of inorganic ions with the hydrophilic polymer was determined as a function of the pH and filtration factor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 178–185, 2006