Influence of the intrinsic layer characteristics on a-Si:H p–i–n solar cell performance analysed by means of a computer simulation

In this paper a set of one-dimensional simulations of a-Si:H p–i–n junctions under different illumination conditions and with different intrinsic layer are presented. The simulation program ASCA permits the analysis of the internal electrical behaviour of the cell allowing a comparison among the different internal configurations determined by a change in the input set. Results about the internal electric configuration will be presented and discussed outlining their influence on the current tension characteristic curve. Considerations about the drift–diffusion and the generation–recombination balance distributions, outlined by the simulation, can be used to explain the correlation between the basic device output, the i-layer characteristics (thickness and DOS), the incident radiation intensity and photon energy.     

Temperature during conservation in laboratory silos affects fermentation profile and aerobic stability of corn silage treated with Lactobacillus buchneri,Lactobacillus hilgardii,and their combination

The environment temperature and its effect on the temperature of silage is very important for the fermentation and subsequent quality of a silage. Obligate heterofermentative lactic acid bacteria (LAB) inocula, because of their ability to inhibit yeasts, have been developed to prevent the aerobic deterioration of silages. The temperature during silage conservation may also play an important role in the fermentation profile of silages. This study has evaluated the effect of temperature, during the conservation of whole crop corn silage, untreated or treated with different LAB inocula, on the fermentation profile and on the aerobic stability of the silage. Corn was harvested at 42% dry matter and either not treated (control) or treated with Lactobacillus buchneri NCIMB 40788 (LB) at 300,000 cfu/g fresh matter (FM); Lactobacillus hilgardii CNCM I-4785 at 150,000 cfu/g FM (LH₁₅₀); L. hilgardii CNCM I-4785 at 300,000 cfu/g FM (LH₃₀₀); or LB+LH at 150,000 cfu/g FM each. In an attempt to experimentally simulate temperature fluctuations in the mass or at the periphery of a silage bunker, corn was conserved in laboratory silos at a constant temperature (20 ± 1°C; MASS) or at lower and variable outdoor temperatures (PERIPH; ranging from 0.5 to 19°C), and the silos were opened after 15, 30, and 100 d of conservation. Lactic acid, acetic acid, and ethanol contents increased in all the silages over the conservation period. The lactic acid content was higher (+10%) in the silages kept at a constant temperature than those conserved at the lower and variable outdoor temperatures. The acetic acid was higher in the treated silages than in the control ones conserved at a constant temperature for 100 d. Moreover, 1,2-propanediol was only detected in the treated silages after at least 30 d at a constant temperature, whereas only traces were detected in the LB+LH treatment for the other temperature conditions. The yeast count decreased during conservation at a slower rate in PERIPH than in MASS and on average reached 2.96 and 4.71 log cfu/g for MASS and PERIPH, respectively, after 100 d of conservation. The highest aerobic stability values were observed for LH₃₀₀ (191 h) in the MASS silage after 100 d of conservation, whereas the highest aerobic stability was observed in LB+LH (150 h) in the PERIPH silages. After 7 d of air exposure, a pH higher than 4.5 and a higher yeast than 8.0 log cfu/g were detected in all the silages opened after 15 and 30 d of conservation. A pH value close to that of silo opening was detected in the LB, LH₁₅₀, and LH₃₀₀ silages conserved under MASS conditions after 100 d, whereas LB+LH was the most effective under PERIPH conditions. The temperature and its fluctuation during conservation of silage in laboratory silos influenced the fermentation, which in turn had an effect on the quality of silage and on the extent of the effect of LAB inocula.     

Influence of edible coating on quality of plum (<Emphasis Type="Italic">Prunus salicina</Emphasis> Lindl. cv. ‘Sapphire’)

Edible coating may enhance the boundary layer resistance resulting in enhanced shelf life of fruits. Plums (Prunus salicina Lindl. cv. ‘Sapphire’) were treated with coating material based on carbohydrate (Versasheen) with sorbitol as plasticizer and stored at 20 °C and 85% RH. The influence of coating on the gas transmission rates was estimated using a carrier of 100% cellulose paper. Coating treatment reduced the transmission rate of CO₂, O₂, and H₂O. Changes in fruit weight, fruit flesh firmness, color parameters (L*, a*, and hue angle), soluble solids content, pH, titratable acidity, ethylene, CO₂, malondialdehyde (MDA), and VIS/NIR fruit reflectance spectrum were recorded in 2-day interval. Edible coating was effective in delaying the increase of pH and the loss of firmness, titratable acidity, L*, hue angle, and MDA. The incorporation of sorbitol showed beneficial effects on decreasing the weight loss, CO₂, and ethylene exchange. In the room temperature storage period, not only fruit ripening was measurable in the VIS (350–750 nm) and NIR (750–1,400 nm) wavelength ranges due to the decrease in the fruit chlorophyll absorption but also water loss, respectively. After 5-day room temperature storage the chlorophyll absorption peak in the spectra was already beyond the detection limit in all treatments, while after 3-day storage, the coating effect on the spectral intensities was feasible to separate control from coated plums.     

Aluminium Foil as a Food Packaging Material in Comparison with Other Materials

Aluminium foil is an important material in laminates and has wide application in food packaging. Its barrier function against the migration of moisture, oxygen and other gases, and volatile aroma, as well as against the impact of light is generally higher than any plastic laminate material. Therefore, aluminium foil is used in the laminates when insufficient barrier properties are the limiting factor for shelf-life stability of food. The barrier properties of aluminium-coated plastic laminates, which can offer an alternative to aluminium foil laminates, are somewhat less efficient. The use of aluminium foil in rigid, semirigid, and flexible package for in-pack thermal processing allows the selection of package geometries that ensure rapid heating and minimum heat damage during processing. On the tightness of packages, the mechanical stability and quality of sealing is of particular importance. The chemical stability of aluminium foil in contact with food depends on the composition of the food items. With present toxicological knowledge, the use of aluminium in packaging material is considered to be safe, and inner-coating of the foil is recommended in specific cases.     

Reduction of counts of Listeria monocytogenes in cheese by means of high hydrostatic pressure

Inactivation of Listeria monocytogenes (strains NCTC 11994 and Scott A) was evaluated in model cheeses submitted to 10 min HHP treatments of 300, 400 or 500 MPa at 5 or 20 degrees C. Counts were measured immediately after high hydrostatic pressure (HHP) treatment (day 1) and after 2, 15 and 30 days of storage at 8 degrees C. Both strains behaved significantly different after 400 and 500 MPa, being NCTC 11994 more sensitive. Scarce differences were found among final values at both HHP treatment temperatures. Initial reductions (log cfu/g) for 400 MPa at 20 degrees C were 2.9 +/- 0.2 for strain NCTC 11994 and 1.5 +/- 0.2 for Scott A. They reached after 30-day storage 5.3 +/- 0.2 and 4.6 +/- 0.4 log cfu/g for NCTC 11994 and Scott A, respectively. For 500 MPa treatments, day-1 reductions of both strains were around 5-log cfu/g, and counts fell below quantification limit after 30 days. Injured cells (around 0.8-log cfu/g) were mostly observed in 400 MPa treated samples on days 1 and 2. Starter cells suffered higher inactivation and injury. For 20 degrees C treatments, its final counts (log cfu/g) at 300, 400 and 500 MPa were: 8.5 +/- 0.2, 5.4 +/- 0.3 and 2.5 +/- 0.1, respectively. These figures evidence the HHP potential to improve safety of cheese products.     

Co-occurrence of ochratoxin A and citrinin in unprocessed cereals established during a three-year investigation period

The aim of this study was to investigate ochratoxin A (OTA) and citrinin (CIT) co-occurrence in different unprocessed cereals (n = 189) originating from Croatia during a three-year investigation period (2014–2016) using validated enzyme immunoassay (ELISA) methods. CIT and OTA were determined in 49% and 7% of samples, respectively. Significantly higher (p < 0.05) overall mean concentrations were determined for CIT (66.8 ± 76.0 µg/kg) in comparison to OTA (5.2 ± 1.1 µg/kg). Based on the analysis of all investigated cereals, CIT was found about 15 times more frequently than OTA and in similarly (15-fold) higher concentrations, irrespective of the cultivation year. The results revealed a moderately positive correlation between OTA and CIT concentrations in maize (r_s = 0.44) and wheat (r_s = 0.59), whereas in barley and oat this correlation (p > 0.01) was not significant.     

Use of coffee by‐products for the cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus and its impact on biological properties of extracts thereof

Incorporating spent coffee grounds (SCGs), a by‐product from coffee brewing, in growth substrate of beneficial edible mushrooms is an approach that has to be further studied due to its potential positive outcomes: environmental impact mitigation, production costs reduction and beneficial impact on consumer health. Hence, cultivation of Pleurotus citrinopileatus and Pleurotus salmoneo‐stramineus was tested using SCG which enabled maximum production yield of P. citrinopileatus which was of 25.1% (w/w). Variable antidiabetic potential was observed between aqueous and enzymatic extracts (3.8%–29% inhibition) regardless species and substrates, whereas aqueous extract of P. citrinopileatus grown in substrate without SCG stood out presenting the highest antioxidant activity and inhibition activity of angiotensin I‐converting enzyme (IC₅₀ = 123 μg mL^?1). Ethanolic and aqueous extracts of both Pleurotus species grown in the presence or absence of SGC proved to be an interesting prebiotic source for growth of Bifidobacterium animalis Bo in comparison with fructooligosaccharides (FOS).     

A review on selected heterogeneous photocatalysts for hydrogen production

In this study, visible light‐driven heterogeneous photocatalysts for hydrogen production are comparatively assessed based on technical, environmental, and cost criteria. The photocatalysis systems are compared with respect to their (i) rate of hydrogen generation per gram; (ii) rate of hydrogen generation per m² of the specific surface area; and (iii) the band gap energy. The photocatalysis systems are also compared and discussed in terms of flammability, reactivity, and their impact on living systems' health. Furthermore, the costs of the required components of the photocatalysis systems are ranked. In addition to individual photocatalyst comparison, seven photocatalyst groups are ranked and compared. The results show that TiO₂‐C‐362 and Ag_0.03Mn_0.40Cd_0.60S show the highest in terms of µmol/h‐g_cat and µmol/h‐m²_cat, respectively, and TiO₂‐C‐362 has the highest overall rankings. The Zn/In/S‐based photocatalyst groups show the highest hydrogen production rate in terms of µmol/h‐gcat and µmol/h‐m²_cat. Overall, Cd/S/Zn has the highest rankings when cost and health and environmental impact criteria are taken into account. Copyright © 2014 John Wiley & Sons, Ltd.     

Assessment of safety of enterococci isolated throughout traditional Terrincho cheesemaking: virulence factors and antibiotic susceptibility

Enterococci account for an important fraction of the adventitious microflora of traditional cheeses manufactured in Mediterranean countries from small ruminants' raw milk and play an important role in the development of suitable organoleptic characteristics of the final product. It has been suggested that animals used for food or animals that supply edible products are a reservoir of antibiotic-resistant enterococci. The main purpose of this research effort was thus to identify, to the species level, a total of 73 enterococci with high tolerance to acidic pH and bile salts (as prevailing environmental conditions in the first portion of the gastrointestinal tract), which were previously isolated from the milk feedstock to the final product of Terrincho cheesemaking, and to determine their profiles of antibiotic susceptibility, coupled with the occurrence of specific virulence factors (especially in those that might eventually be claimed to exhibit suitable probiotic and technological performances). Isolates, identified by both API 20 STREP and PCR methods, were found to belong to the following Enterococcus species: E. casseliflavus, E. durans, E. faecalis, E. faecium, and E. gallinarum. Susceptibility of those isolates was observed to most antibiotics tested, whereas none harbored aminoglycoside resistance genes. PCR screenings for cytolysin genes (cylL(L), cylL(s), cylM, cylB, and cylA), surface adhesin genes (efaA(fs), efaA(fm), and esp), the aggregation protein gene (agg), and the extracellular metalloendopeptidase gene (gelE) were performed. All isolates proved negative for cylL(L), cylM, cylB, and agg genes. Both E. faecalis strains were positive for the cell wall-associated protein Esp and the cell wall adhesin efaA(fs), whereas the cell wall adhesin efaA(fm) was detected in 11 of the 12 E. faecium strains. Only one strain possessed the cylL(s) determinant, and another possessed the cylA gene. Incidence of virulence determinants was thus very low; hence, the enterococcal adventitious microflora tested is essentially safe.     

A feasibility study of Lactobacillus plantarum in fruit powders after processing and storage

The aim of this study was to develop fruit powders (apple, banana and strawberry) enriched with a probiotic strain (Lactobacillus plantarum 299v). Two methodologies were proposed: (i) drying of the fruit with probiotic culture incorporated (by convection) or (ii) drying of fruit (by convection) and addition of spray‐dried probiotic culture. In the first methodology, processing caused a notable reduction in probiotic viable counts in apple, but this reduction was lower during drying of banana and strawberry. A large reduction in viable cells was also recorded during storage. In the second methodology, the survival of L. plantarum 299v was considerably higher during spray‐drying, and fruit powders with a microbial content suitable for a probiotic food (10⁸–10⁹ cfu g^?1) were obtained. The fruit powders incorporating L. plantarum 299v can be stored at 4 °C or at room temperature, for at least 3 months. This preliminary study demonstrated that fruit powders are good carriers of probiotic cultures, but the techniques used to produce them should be carefully considered.