Chiral Excitonic Organic Photodiodes for Direct Detection of Circular Polarized Light

A facile route to soft matter self‐powered bulk heterojunction photodiode detectors sensitive to the circular polarization state of light is shown based on the intrinsic excitonic circular dichroism of the photoactive layer blend. As light detecting materials, enantiopure semiconducting small molecular squaraine derivates of opposite handedness are employed. Via Mueller matrix ellipsometry, the circular dichroism is proven to be of H‐type excitonic nature and not originating from mesoscopic structural ordering. Within the green spectral range, the photodiodes convert circular polarized light into a handedness‐dependent photocurrent with a maximum dissymmetry factor of ±0.1 corresponding to 5% overall efficiency for the polarization discrimination under short circuit conditions. On the basis of transfer matrix optical simulations, it is rationalized that the optical dissymmetry fully translates into a photocurrent dissymmetry for ease of device design. Thereby, the photodiode's ability to efficiently distinguish between left and right circularly polarized light without the use of external optical elements and voltage bias is demonstrated. This allows a straightforward and sustainable future design of flexible, lightweight, and compact integrated platforms for chiroptical imaging and sensing.     

Network controller design for SONATA-a large-scale all-optical passive network

This paper describes the network architecture and provides a performance analysis of a passive optical network named SONATA, which has been proposed and demonstrated in the context of the European Union ACTS Program. In this nationwide all-optical network, end terminals access a single passive routing node via PONs using a TDMA/WDMA access scheme based on reservations. The centralized network controller runs resource allocation algorithms in order to avoid conflicts among end terminals. We formally define the resource allocation problem at the network controller, and show that, in general, it is NP-hard. We also provide simple heuristic algorithms to solve the problem. The analysis of the algorithms is performed both via analysis and simulation.     

Composite Nanostructures of TiO2 and ZnO for Water Splitting Application: Atomic Layer Deposition Growth and Density Functional Theory Investigation

The commercialization of solar fuel devices requires the development of novel engineered photoelectrodes for water splitting applications which are based on redundant, cheap, and environmentally friendly materials. In the current study, a combination of titanium dioxide (TiO₂) and zinc oxide (ZnO) onto nanotextured silicon is utilized for a composite electrode with the aim to overcome the individual shortcomings of the respective materials. The properties of conformal coverage of TiO₂ and ZnO layers are designed on the atomic scale by the atomic layer deposition technique. The resulting photoanode shows not only promising stability but also nine times higher photocurrents than an equivalent photoanode with a pure TiO₂ encapsulation onto the nanostructured silicon. Density functional theory calculations indicate that segregation of TiO₂ at the ZnO surfaces is favorable and leads to the stabilization of the ZnO layers in water environments. In conclusion, the novel designed composite material constitutes a promising base for a stable and effective photoanode for the water oxidation reaction.     

RingO: an experimental WDM optical packet network for metro applications

This paper presents Ring Optical Network (RingO), a wavelength-division-multiplexing (WDM), ring-based, optical packet network suitable for a high-capacity metro environment. We present three alternative architectural designs and elaborate on the effectiveness of optic with respect to electronic technologies, trying to identify an optimal mix. We present the design and prototyping of a simple but efficient access control protocol, based upon the equivalence of the proposed network architecture with input-buffering packet switches. We discuss the problem of node allocation to WDM channels, which can be viewed as a particular optical network design problem. We, finally, briefly illustrate the fault protection properties of the RingO architecture. The main contribution of this paper is the identification and experimental validation of an innovative optical network architecture, which is feasible and cost effective with technologies available today, and can be a valid alternative to more consolidated solutions in metro applications.     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

DVB-S2 LDPC Decoding Using Robust Check Node Update Approximations

Broadband satellite services to fixed terminals are currently offered in the forward link by the 2nd generation (2G) digital video broadcasting satellite (DVB-S2) standard. For this standard the use of powerful low-density parity-check (LDPC) error correcting codes has been adopted performing within approximately 1 dB from the Shannon capacity limit. This paper studies and compares for the first time in a systematic manner different approximation methods used in check node update computation of DVB-S2 LDPC decoding with the aim of reducing computational complexity. Various performance evaluation results are presented for a wide range of DVB-S2 parameters, such as LDPC codeword size, coding rate, modulation format and including several decoding algorithms. It is shown that the proposed check node update approximations have a robust behavior, i.e. the resulting performance is quite independent of the DVB-S2 modulation and coding parameters. It is further shown that these approximations perform very close to the optimal sum-product algorithm (SPA) in degradation, which is less than 0.2 dB. Despite this small degradation, the reduction in computational complexity compared to the optimal SPA is significant and can be as high as 40% in computational time savings.     

Carrier trapping in thin N2O-grown oxynitride/oxide di-layer for PowerMOSFET devices

A detailed study of the carrier trapping properties shown by the silicon/oxynitride/oxide gate layers in PowerVDMOS technologies is reported. A quantitative analysis of hole and electron trap densities versus the specific N₂O based nitridation process, extracted from Fowler–Nordheim constant current stress kinetics, allows a deep understanding of the role played by those defects in the susceptibility of every nitrided layer.     

Logarithmic wavelength demultiplexers

A general approach for a full 1 /spl times/ N demultiplexer using a tree of filter stages is proposed. The device architecture is compact, requiring at least N - 1 filter stages, and flexible, as each filter stage can be arbitrarily designed, with the only constraint of the half-band power property. The filters can be realized using any optical filtering techniques as thin-film interference, Bragg gratings, or planar delay-line circuits. The performances of the proposed architecture are illustrated with respect to different lattice-form finite impulse response (FIR) and infinite impulse response (IIR) filter stages, showing that the demultiplexer inherently presents low crosstalk and flat passband. A design example of a 1 /spl times/ 4 demultiplexer consisting of three all-pass (AP) filters is compared with a generalized Mach-Zehnder interferometer (MZI) with four AP filters in its arms, showing that the two approaches achieve similar results.     

Analytical study of a solution-processed diode based on ZnO nanoparticles using multi-walled carbon nanotubes as Schottky contact

Journal of Materials Science: Materials in Electronics - The search for good electrodes processed by solution has interested several niches to produce printed solar cells, lighting emitting diodes,...     

In vitro intestinal absorption of amino acid mixtures extracted from codfish (Gadus morhua L.) salting wastewater

This study reports on the intestinal permeability of salt‐containing mixtures of amino acids extracted from codfish salting wastewater. Permeability was evaluated in vitro using the Caco‐2 cell line model; cell integrity during exposure to mixtures of amino acids was estimated by measuring the transepithelial electrical resistance (TEER). The effect of salt (NaCl) on the permeability and on the intestinal cell's integrity was also examined. Permeation rate (i.e. transport) was ≥95% for all amino acids except for creatine, for which it was 6%. Values for apparent permeability coefficients, P_app > 10^?5 cm s^?1, for mixture with isotonic concentration of NaCl suggest that amino acids are very likely to be absorbed in humans. Mixture with a hypertonic level of NaCl exerts a cytotoxic effect in intestinal cells resulting in a loss of epithelium integrity. Results show that isotonic mixture of amino acids extracted from codfish salting wastewater could be used in food, feed, cosmetic and pharmaceutical formulations. These applications could contribute to the fish industry sustainability.