Modelling and Characterisation of the Texture Development in the Fusion Zone of An Austenitic Weld

The relation between texture and microstructure and the macroscopic solidification direction has been investigated for an austenitic 316L stainless steel weld. The fusion zone has been characterised by EBSD. Texture development has been simulated by thermal Finite Element Analysis coupled with a simple model of preferential <100>‐oriented solidification following the solidification direction. The thermal part is validated by means of thermocouple measurements at several locations on the specimen. The predicted texture is in very good agreement with the measured one.     

Improving the Design of Greek Hollow Clay Bricks

The hollow clay brick is the typical building unit that is employed not only over the whole Greece but also in many other Mediterranean countries. Nevertheless, its design is completely empirical. In this study, the design of the hollow clay brick is analyzed by employing a finite element package. To carry out this analysis, the thermal conductivity of the solid clay is measured by the transient hot-wire technique. As a consequence of the analysis, an improvement of 24 % in the design of the hollow clay brick is proposed.     

在双镶嵌铜互联中O.13微米器件生成用的基于PVD和ALD阻挡层的先进技术

1. Introduction The requirement of minimal bottom coverageand thick sidewall coverage for PVD-based films forlow via resistance and improved stress migration isnot easy to achieve with traditional depositionmethods. Modern I-PVD techniques give high bot-tom coverage, due to the ionized component of thedeposition flux. Sidewall coverage tends to be low,which is mainly due to off-normal deposition fluxand a less than unity sticking coefficient.     

A versatile wavelet domain noise filtration technique for medical imaging

In this paper, we propose a robust wavelet domain method for noise filtering in medical images. The proposed method adapts itself to various types of image noise as well as to the preference of the medical expert; a single parameter can be used to balance the preservation of (expert-dependent) relevant details against the degree of noise reduction. The algorithm exploits generally valid knowledge about the correlation of significant image features across the resolution scales to perform a preliminary coefficient classification. This preliminary coefficient classification is used to empirically estimate the statistical distributions of the coefficients that represent useful image features on the one hand and mainly noise on the other. The adaptation to the spatial context in the image is achieved by using a wavelet domain indicator of the local spatial activity. The proposed method is of low complexity, both in its implementation and execution time. The results demonstrate its usefulness for noise suppression in medical ultrasound and magnetic resonance imaging. In these applications, the proposed method clearly outperforms single-resolution spatially adaptive algorithms, in terms of quantitative performance measures as well as in terms of visual quality of the images.     

Design and architecture of a new space priority mechanism for ATM network nodes

This paper presents the architecture of a new space priority mechanism intended to control cell loss in ATM switches. Our mechanism is a new generic concept called: the multiple pushout. It is based on the utilization of both AAL and ATM features and on a particular definition of the priority bit. Whenever one cell of a message overflows the buffer of an ATM switch, the algorithm causes the switch to discard other cells of the message (including later arrivals). Such discarding frees buffer spaces for cells of other messages that have a chance of arriving at their destination intact. Our objective is to emphasize that in case of overload, with most of proposed mechanisms, cells are discarded without any semantic information about the type of cells. Therefore, at the destination, all the fragments of the corrupted messages will be discarded anyway. Finally, we present simulation results comparing cell loss rates and message loss rates of several space priority mechanisms.     

Part II: An example of the use of the comsis software: simulation of an optical network which uses wavelength multiplexing,fsk modulation format and direct detection

This second article deals with using the Comsis software for a particular application. Simulation is used to determine the maximum channel density in presence of crosstalk. In a first part, the modelling of the system is described. The simulation parameters of different optical elements are given. The results show that in the case of channels modulated at 500 Mbitls using fsk modulation format, and a direct detection operation at 1,5 μm, a minimum spacing of 6 GHz can be obtained with a 2 dB penalty. Thus if only the bandwidth of the erbium doped fibre amplifier is taken into account, the maximum number of channels which can be used is 250. However if the fsr (free spectral range) of optical filter is taken into account, the maximun number of channels is limited to 30.     

Facteur de couplage phase-amplitude des diodes lasers avec absorbant saturable

The phase-amplitude coupling factor (α-factor) is one of the fundamental parameters of semiconductor lasers. We show that this factor can be evaluated by time-resolved spectroscopic measurements in pulsed regime. Experiments are carried out with injectionseeded single-mode GaAs lasers whose active stripe includes regions of saturable absorption made by ion implantation. We show that the measured pulse downchirp is proportional to pulse energy. The downchirp amplitude is found to approach four laser cavity intermode spacings at the highest energies. Correspondingly, the ±-values can be five times higher than those reported to date in litterature. High a-values are confirmed in pulse compression experiments. Several mechanisms are proposed to interprete these new results.     

Computerized indoor radio channel estimation using ray tracing

This paper describes a computer tool for site specific indoor radio channel characterization. The behavior of the electromagnetic fields associated with a base station and a portable radio unit is simulated by combining approximate geometric optics and ray tracing techniques. Given a building plan and the transmitter/receiver locations, the set of all[attenuation / time delay /phase] vectors, each representing an electromagnetic propagation path between transmitter and receiver, is computed using ray shooting techniques to generate the channel wideband impulse response. The model takes into account specular reflection and transmission. Linear polarization and various antenna patterns can be simulated as well. The simulated results are shown to correlate well with experimental data. The computer tool can be used to provide estimates of the coverage of a base station and of the channel quality.     

金属沾污对超薄栅氧(2. 5nm)特性的影响

采用可控的金属沾污程序 ,最大金属表面浓度控制在 10 1 2 cm- 2数量级 ,来模拟清洗工艺最大可能金属沾污表面浓度 .利用斜坡电流应力和栅注入方式测量本征电荷击穿来评估超薄栅氧特性和金属沾污效应 .研究了金属锆和钽沾污对超薄栅氧完整性的影响 .实验结果表明金属锆沾污对超薄栅氧完整性具有最严重危害 ;金属钽沾污的栅氧发生早期击穿现象 ,而金属铝沾污对超薄栅氧完整性没有明显影响 .