International collaboration: Will it be keeping alive East European research?

International scientific collaboration is very sensitive to political and economic changes in a country or a geopolitical region. Collaboration in research is reflected by the corresponding coauthorship of the published results which can be analysed with the help of bibliometric methods. Based on data from theScience Citation Index (SCI), the change of annual international coauthorship patterns ofBulgaria, Czechoslovakia, Hungary, Poland andRomania have been analysed for the periods 1981–1985 and 1984–1993, respectively. It is shown that international collaboration was not developing similarly in the countries under study. Whilst scientific communities of Hungary and Poland have already been opening in the early 80s, the international collaboration of the other East-European countries was still dominated by COMECON relations till 1989. As expected, since 1990 an increasing scientific collaboration with highly developed countries can be observed in all five countries. At the same time, scientific collaboration with the former communist countries shows a clear decline. The great share of international co-authorship links is some countries reflect various tendencies part of which are interpreted with the help of a cardiologic model.     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

On-line H NMR spectroscopic investigation of hydrogen bonding in supercritical and near critical CO2–methanol up to 35 MPa and 403 K

On-line NMR spectroscopy can beneficially be applied to studies of supercritical and near-critical fluids as an alternative to optical spectroscopy. Up to now high pressure NMR experiments are predominantly accomplished using custom made NMR batch reactors. The authors present a novel high pressure cell with displacement plunger for on-line NMR experiments on compressible fluids which can be used in conjunction with commercially available SCF NMR flow probes. The on-line technique offers advantages compared to stopped flow techniques such as enhanced control of mixture composition and reaction parameters as well as the facility of engagement into the reaction. The new apparatus is used for NMR studies on hydrogen bonding of methanol in near critical and supercritical carbon dioxide up to 403 K and 35 MPa for which data on the chemical shift of the hydroxyl group and methyl group are reported and interpreted.     

Improvements of metabolic imbalances after enteral sodium bicarbonate supplementation in infants of very low birth weight (VLBW)

One of the main points of clinical care is the catch-up growth of VLBW infants especially those of small gestational age (SGA). The required high amounts of protein are often not tolerated [1]. Metabolic imbalances due to immaturities of protein metabolism are described [2, 3] also in infants SGA feeding amounts of proteins comparable to mature newborns [4]. Remarkable signs of overloading by proteins are the elevation of amino acid and the bile acid concentrations in the serum [3, 5, 6]. In some of those cases [7] late metabolic acidosis (LMA) is to be seen. There is evidence in the literature that sodium bicarbonate influences nitrogen [8] and ionic balances [9] in newborn animals without any signs of acidosis, besides its simple buffer function. The aim of this study was to control changes of metabolic imbalances after bicarbonate supplementation before development of acidosis in predisposed infants. Therefore we determined parameters, which were significantly changed with LMA [6] during two feeding schedules: firstly, during bolus supplementation in infants feeding (2.0 +/- 0.4) g/kg BW.d protein and secondly during chronic supplementation of bicarbonate to (3.0 +/- 0.4) g/kg BW.d protein. In relation to the improvement of the nitrogen balance in growing lambs [7] we supposed comparable effect of bicarbonate on metabolic imbalances caused by protein overloading.     

Interhemispheric transfer after spontaneous recovery in 43 cases of severe closed head injury.

Examined the possibility of frequent callosal disconnection following closed head injury. Interhemispheric transfer was evaluated in 43 severe closed-head-injured patients (aged 18–51 yrs) using a wide-ranging battery of untimed behavioral tasks, after the period of spontaneous recovery. Only 1 S showed signs of callosal disconnection. Much effective interhemispheric transfer occurred in closed-head-injured Ss after the period of spontaneous recovery. More frequent occurrence of the disconnection syndrome in its acute phase is a possibility that cannot be excluded. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

High-quality photonic sampling streams from a semiconductor diodering laser

We report on the development of an ultralow-noise, external-cavity, actively mode-locked semiconductor diode laser for application in next-generation photonic sampling systems. A summary of harmonically mode-locked noise characteristics in a 65-MHz ring cavity is presented through the range of pulse repetition frequencies between 130 MHz and 8.3 GHz (2nd-128th harmonic). Important implications regarding the use of gain-versus-loss modulation as the active modelocking mechanisms are discussed. We also report what are, to our knowledge, the lowest noise characteristics achieved to date for a semiconductor diode laser operating at 10 GHz. Individually optimized results of 0.12% rms amplitude noise (10 Hz-10 MHz), and 43 fs rms residual phase jitter (10 Hz-10 MHz) provide a theoretical resolution of 8.6 bits in a 10-GSPS optical analog-to-digital converter. We have also achieved dispersion-compensated pulsewidths; as short as 1.2 ps, and shown successful operation of a novel phase-locked-loop capable of reducing the rms; residual phase noise by as much as 91% within its response bandwidth. Finally, the first measurements of residual phase noise out to the Nyquist frequency (5 GHz) are presented, providing an upper bound on the rms residual phase jitter of 121 fs (10 Hz-5 GHz)     

Data to frequency mappings in various MSK schemes

Minimum shift keying (MSK) is a digital modulation scheme which is suited to demanding applications requiring good bandwidth efficiency and error performance. It can be regarded as continuous phase frequency shift keying (CPFSK) with two signalling frequencies. In general, there is no unique mapping from the input data polarity to the particular signalling frequency during a given bit interval. The simplest formulation maps zeros of the data (marks) to the lower frequency, and ones (spaces) to the higher frequency. Other formulations of MSK employ more complex mappings. The article summarises the most commonly encountered mappings, then shows how to convert from one formulation to another by manipulating the input or output data. It is, therefore, possible to establish communication between different MSK modems employing different formulations of MSK by simple processing of the data     

Zum Spannungsrißkorrosionsverhalten rekristallisierter Bleche der AlLi-Legierung 8090-T81

On the stress corrosion cracking behaviour of recrystallized 8090-T81 Sheets The stress corrosion cracking behaviour of a recrystallized sheet of the Al-Li-Cu-Mg-Zr alloy 8090-T81 was studied performing accelerated tests under constant deformation, constant load, and slow strain rate conditions. The used electrolytes were an aqueous 3.5% NaCl solution, an aqueous solution of 2% NaCl + 0.5% Na₂CrO₄ at pH = 3, and synthetic seawater according to ASTM D1141. Alternately immersed in 3.5% NaCl solution according to ASTM G44 the investigated alloy was found to be susceptible to stress corrosion cracking was not promoted by continuous immersion in aerated 3.5% NaCl solution, 3.5% NaCl solution saturated with carbon dioxide, and in acid chromate inhibited 2% NaCl solution. Using the slow strain rate technique with continuously immersed flat tensile specimens stress corrosion cracking was only observed in synthetic seawater. Under specific environmental conditions hydrogen embrittlement can occur in the investigated material.     

Sequence‐Specific Molecular Lithography Towards DNA‐Templated Electronics

Recent advances in the realization of individual molecular‐scale devices [1,2] highlight the integration of individual devices into large‐scale functional circuits as the major challenge. DNA‐programmed assembly is a promising avenue in that direction due to the large amount of information that can be coded into the molecules and the ability to translate that information into physical constructs [3]. Large‐scale DNA‐templated electronics require, however, complex manipulation of double‐stranded DNA (dsDNA) molecules, as well as patterning of the electrical properties instilled to them by, e.g., metallization. To that end, sequence‐specific molecular lithography on single DNA molecules has been developed [4]. This was achieved by harnessing the exquisite homologous recombination process of the RecA protein. Sequence‐specific patterning of the metal coating of DNA molecules, localization of arbitrary labeled molecular objects at any desired dsDNA address without prior modifications, and generation of molecularly accurate stable dsDNA‐dsDNA junctions are demonstrated. The information encoded in the DNA molecules directs the lithographic process in analogy to the masks used in conventional microelectronics. The RecA protein provides the assembling capabilities, as well as the resist function.     

Paradoxical effects of information presentation formats and contextual interference on transfer of a complex cognitive skill

In a 2 × 2 factorial design the effects of (1) information presentation format and (2) contextual interference on training behavior, transfer performance and mental effort were studied for learning troubleshooting skills with a computer-based simulation. Participants studied information about the functioning of an alcohol distillery system (system principles) prior to practicing troubleshooting skills. Regarding the first factor, an expository (Exp) format, in which system principles, examples and a troubleshooting strategy were presented in a textual form, was compared to an inquisitory (Inq) format, in which participants had to predict the behavior of the system after they studied the system principles and in which demonstrations of the troubleshooting strategy were given. With regard to the second factor, a low contextual interference (LCI) condition in which participants practiced to diagnose types of system failures in a blocked schedule was compared to a high contextual interference (HCI) condition, in which different failure types were practiced in a random schedule. The main hypothesis is that the Inq and HCI conditions promote the development of cognitive schemata that enable learners to diagnose a malfunctioning system component by interpreting symptoms in terms of violations of system principles. Hence, they are expected to show higher transfer performance than participants in the traditional Exp and LCI conditions, who are believed to develop schemata containing associations between symptoms and malfunctioning components that are context-bound and less useful for diagnosing new failures. Contrary to the predictions, the traditional conditions (Exp and LCI) showed higher performance on a transfer test two weeks after training. Possible explanations for this result are discussed.