Modification of TiAlV Alloys with Hybrid Layers Containing Metallic Nanoparticles Obtained by the Sol–Gel Method: Surface and Structural Properties

The aim of the work was to obtain hybrid coatings containing silver, copper, and zinc nanoparticles on the TiAlV medical alloy via a sol–gel process. The developed layers were designed to bring about a bactericidal and fungicidal effect, as well as for protection against surgical scratches during the implantation of implants used in veterinary medicine. In this work, the authors focused on evaluating the microstructure (SEM + EDS); the structure (XRD, FTIR); and the surface properties, such as wettability, free surface energy, and roughness of layers with various concentrations of metallic nanoparticles (2 and 5 mol %). Our results confirmed that the sol–gel method enables the easy manufacturing of hybrid layers endowed with different porosity values as well as various shapes and sizes of metallic nanoparticles. A higher concentration of nanoparticles was observed on the surface containing 5 mol % of metallic salts. The highest degree of homogeneity was obtained for the layers containing silver nanoparticles. In addition, the silver nanoparticles were round and had the smallest dimensions, even below 20 nm. The FTIR and XRD structural studies confirmed the presence of an organosilicon matrix containing all three types of the metallic particles. We conclude that the higher concentration of nanoparticles influenced the alloy surface parameters.     

A Holistic Approach to Determining Stereochemistry of Potential Pharmaceuticals by Circular Dichroism with β-Lactams as Test Cases

This paper’s main objective is to show that many different factors must be considered when solving stereochemical problems to avoid misleading conclusions and obtain conclusive results from the analysis of spectroscopic properties. Particularly in determining the absolute configuration, the use of chiroptical methods is crucial, especially when other techniques, including X-ray crystallography, fail, are not applicable, or give inconclusive results. Based on various β-lactam derivatives as models, we show how to reliably determine their absolute configuration (AC) and preferred conformation from circular dichroism (CD) spectra. Comprehensive CD analysis, employing both approaches, i.e., traditional with their sector and helicity rules, and state-of-the-art supported by quantum chemistry (QC) calculations along with solvation models for both electronic (ECD) and vibrational (VCD) circular dichroism ranges, allows confident defining stereochemistry of the β-lactams studied. Based on an in-depth analysis of the results, we have shown that choosing a proper chiroptical method/s strictly depends on the specific case and certain structural features.     

Effect of Acute Sprint Exercise on Myokines and Food Intake Hormones in Young Healthy Men

Physical exercise is known to influence hormonal mediators of appetite, but the effect of short-term maximal intensity exercise on plasma levels of appetite hormones and cytokines has been little studied. We investigated the effect of a 30 s Wingate Test, followed by a postprandial period, on appetite sensations, food intake, and appetite hormones. Twenty-six physically active young males rated their subjective feelings of hunger, prospective food consumption, and fatigue on visual analogue scales at baseline, after exercise was completed, and during the postprandial period. Blood samples were obtained for the measurement of nesfatin-1, ghrelin, leptin, insulin, pancreatic polypeptide (PP), human growth factor (hGH) and cytokine interleukin-6 (IL-6), irisin and plasma lactate concentrations, at 30 min before exercise, immediately (210 s) after exercise, and 30 min following a meal and at corresponding times in control sedentary males without ad libitum meal intake, respectively. Appetite perceptions and food intake were decreased in response to exercise. Plasma levels of irisin, IL-6, lactate, nesfatin-1 and ghrelin was increased after exercise and then it was returned to postprandial/control period in both groups. A significant rise in plasma insulin, hGH and PP levels after exercise was observed while meal intake potentiated this response. In conclusion, an acute short-term fatiguing exercise can transiently suppress hunger sensations and food intake in humans. We postulate that this physiological response involves exercise-induced alterations in plasma hormones and the release of myokines such as irisin and IL-6, and supports the notion of existence of the skeletal muscle–brain–gut axis. Nevertheless, the detailed relationship between acute exercise releasing myokines, appetite sensations and impairment of this axis leading to several diseases should be further examined.     

Effect of the sintering temperature on microstructure and properties of Al2O3–Cu–Ni hybrid composites obtained by PPS

In the present research, the influence of sintering temperature on the microstructure and properties of Al₂O₃–Cu–Ni hybrid composites prepared by the Pulse Plasma Sintering (PPS) technique were described. In this research, three temperatures have been selected: 1250°C, 1300°C, and 1350°C. SEM observations were carried out to determine the distribution of the metallic phase in the composite depending on the sintering temperature. The conducted experiments and microscopic observations enabled a better understanding of the phenomena occurring between the ceramic matrix and metallic phase in the obtained materials. The mechanical properties like a hardness and fracture toughness were measured. The technology applied allowed us to obtain ceramic-metal composites with a homogeneous microstructure. It was found that the sintering temperature influences the selected physical and mechanical properties of the composites produced. It was found that samples produced at 1300°C are characterized by the highest relative density and the mechanical properties.     

High resolution SEM characterization of nano‐precipitates in ODS steels

The performance of the present‐day scanning electron microscopy (SEM) extends far beyond delivering electronic images of the surface topography. Oxide dispersion strengthened (ODS) steel is on of the most promising materials for the future nuclear fusion reactor because of its good radiation resistance, and higher operation temperature up to 750°C. The microstructure of ODS should not exceed tens of nm, therefore there is a strong need in a fast and reliable technique for their characterization. In this work, the results of low‐kV SEM characterization of nanoprecipitates formed in the ODS matrix are presented. Application of highly sensitive photo‐diode BSE detector in SEM imaging allowed for the registration of single nm‐sized precipitates in the vicinity of the ODS alloys. The composition of the precipitates has been confirmed by TEM‐EDS.     

Synthesis of Novel Phosphonic‐Type Activity‐Based Probes for Neutrophil Serine Proteases and Their Application in Spleen Lysates of Different Organisms

Neutrophils are a type of granulocyte important in the “first line of defense” of the innate immune system. Upon activation, they facilitate the destruction of invading microorganisms by the production of superoxide radicals, as well as the release of the enzymatic contents of their lysozymes. These enzymes include specific serine proteases: cathepsin G, neutrophil elastase, proteinase 3, as well as the recently discovered neutrophil serine protease 4 (NSP4). Under normal conditions, the proteolytic activity of neutrophil proteases is tightly regulated by endogenous serpins; however, this mechanism can be subverted during tissue stress, thereby resulting in the uncontrolled activity of serine proteases, which induce chronic inflammation and subsequent pathology. Herein, we describe the development of low‐molecular‐weight activity‐based probes that specifically target the active sites of neutrophil proteases.     

First nuclear transmutation of 237Np and 241Am by accelerator-driven system at Kyoto University Critical Assembly

This study demonstrates, for the first time, the principle of nuclear transmutation of minor actinide (MA) by the accelerator-driven system (ADS) through the injection of high-energy neutrons into the subcritical core at the Kyoto University Critical Assembly. The main objective of the experiments is to confirm fission reactions of neptunium-237 (²³⁷Np) and americium-241 (²⁴¹Am), and capture reactions of ²³⁷Np. Subcritical irradiation of ²³⁷Np and ²⁴¹Am foils is conducted in a hard spectrum core with the use of the back-to-back fission chamber that obtains simultaneously two signals from specially installed test (²³⁷Np or ²⁴¹Am) and reference (uranium-235) foils. The first nuclear transmutation of ²³⁷Np and ²⁴¹Am by ADS soundly implemented by combining the subcritical core and the 100 MeV proton accelerator, and the use of a lead-bismuth target, is conclusively demonstrated through the experimental results of fission and capture reaction events.     

Relaxation dynamics of excited states of Tm3+ ions in TeO2-ZnO-Na2O-Y2O3 glasses

Tellurite glasses with the composition of xTm_2O_3-(6-x)Y_2O_3-3Na_2O-25ZnO-66TeO_2(where 0≤x≤6)were obtained by the melt-quenching technique.Absorption(300 K),excitation(300 K) and fluorescence spectra(300 K) as well as fluorescence decay curves of Tm~(3+)-doped title glasses are presented and discussed in details.The Judd-Ofelt analysis based on the room temperature absorption spectrum was applied for determination of fundamental fluorescence properties such as radiative transition probabilities(A_T),branching ratios(β_R),radiative lifetimes(τ_R) of the emitting levels of the Tm~(3+) ion and stimulated emission cross-sections(σ_(em)).Fluorescence spectra were recorded and analysed in the visible and near-infrared spectral range.The emission and effective cross-section were calculated for the ~3F_4→~3H_6 transition,showing that the investigated glasses are promising laser host materials,operating at 1.8 μm.The observed concentration quenching and non-exponential decay curves from the ~1 G_4 and ~3H_4 states indicate nonradiative energy transfer between Tm~(3+) ions.The analysis of non-exponential fluorescence decay curves from the ~1 G_4 and ~3H_4 levels was carried out in framework of the InokutiHirayama and Yokota-Tanimoto models and energy transfer microparameters were determined.The self-quenching model was proposed for describing relaxation of the first excited state of the Tm~(3+) ion.     

Existing Drugs Considered as Promising in COVID-19 Therapy

COVID-19 is a respiratory disease caused by newly discovered severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The disease at first was identified in the city of Wuhan, China in December 2019. Being a human infectious disease, it causes high fever, cough, breathing problems. In some cases it can be fatal, especially in people with comorbidities like heart or kidney problems and diabetes. The current COVID-19 treatment is based on symptomatic therapy, so finding an appropriate drug against COVID-19 remains an immediate and crucial target for the global scientific community. Two main processes are thought to be responsible for the COVID-19 pathogenesis. In the early stages of infection, disease is determined mainly by virus replication. In the later stages of infection, by an excessive immune/inflammatory response, leading to tissue damage. Therefore, the main treatment options are antiviral and immunomodulatory/anti-inflammatory agents. Many clinical trials have been conducted concerning the use of various drugs in COVID-19 therapy, and many are still ongoing. The majority of trials examine drug reposition (repurposing), which seems to be a good and effective option. Many drugs have been repurposed in COVID-19 therapy including remdesivir, favipiravir, tocilizumab and baricitinib. The aim of this review is to highlight (based on existing and accessible clinical evidence on ongoing trials) the current and available promising drugs for COVID-19 and outline their characteristics.     

Detailed assessment of mesh sensitivity for CFD simulation of coal combustion in a tangential-firing boiler

Journal of Mechanical Science and Technology - Computational fluid dynamics (CFD) has become an essential tool for optimizing the design and diagnosing the operation of a boiler. However, the...