The effect of different cementing strategies and adhesive interface aging on microtensile bond strength (μTBS) of lithium disilicate ceramics to dentin

This study evaluated the effect of different cementing strategies and adhesive interface aging on microtensile bond strength (μTBS) of lithium disilicate ceramic (IPS e.max CAD) to dentin. Forty coronal dentin fragments were randomly assigned to four groups according to the cementing strategy used to bond lithium disilicate ceramic to coronal dentin surface (n = 10): U200 (self-adhesive resin cement (RC) RelyX U200®/3 M ESPE), SBU (single-step self-etching adhesive system (AS) Single Bond Universal®/3 M ESPE + RelyX ARC®/3 M ESPE RC), AdperSB (two-step etch-and-rinse AS Single Bond 2®/3 M + RelyX ARC®/3 M ESPE RC) and Scotchbond (three-step etch-and-rinse AS Scotchbond Multi-Purpose®/3 M + RelyX ARC®/3 M RC). After 48 h, the ceramic-tooth blocks were sectioned perpendicular to the adhesive interface in the form of sticks and randomly subdivided into two groups according to when they were to be submitted to μTBS testing: immediately or 6 months after storage in water. Some sticks were kept for analysis of the adhesive interface by scanning electron microscopy (SEM). The μTBS test was performed in a universal testing machine (0.5 mm/min). The data (MPa) were analyzed using split-plot ANOVA and Tukey’s test (α = 0.05). Water storage decreased μTBS in all cementing strategies. The μTBS was greatest in the Scotchbond group and lowest in the U200 group, at both storage times. No signs of interface degradation were detected under SEM after water storage. In conclusion, water storage decreased bond strength, regardless of the adhesive cementation strategy, and that the three-step adhesive system/dual-cure resin cement ultimately performed better in terms of bond strength.     

Fiber diffraction study of spicules from marine sponges

A synchrotron radiation fiber diffraction structural study of the axial filament of siliceous spicules from two species of marine sponges (the Demosponge Geodia cydonium and the Hexactinellid Scolymastra joubini) was carried out. The sharpness of the spots in the diffraction patterns indicated that the protein units in the filament of both samples were highly organized. A possible explanation is that the arrangement of the protein units is similar to that of the pores in highly ordered siliceous mesoporous materials. Nevertheless, the diffraction patterns are quite different for the two types of spicules. The pattern of G. cydonium is consistent with a regular 2D hexagonal lattice of protein units in the direction perpendicular to the spicule axis, with a repeating distance of 5.8 nm; the units are linked to form fibers along the axis. The pattern of S. joubini indicates the presence of two different 2D lattices in which the repeating protein units are inclined by +50 degrees and -50 degrees with respect to the elongation axis; the distance between the units increases to 8.4 nm. This 2D model is consistent with hexagonal packing of spirally oriented cylindrical protein units elongated along the filament axis.     

Application of Mesoporous Metal Oxide Immobilized Gold–Palladium Nanoalloys as Catalysts for Ethanol Oxidation

Gold–palladium nanoalloys (AuPd) were synthesized by a dendrimer templating method and the as-prepared nanoalloys were immobilized on several reducible mesoporous metal oxides (MMOs). The MMOs of MnO₂, Co₃O₄ and CeO₂ exhibited low catalytic activity in gas-phase oxidation of ethanol. Upon immobilization of the AuPd nanoalloys the activity increased significantly, with high acetaldehyde selectivity at 120 °C. However, this activity increase from pure MMOs to AuPd/MMOs was accompanied by decrease in selectivity to acetaldehyde. One other interesting observation lies on the amount of gold in the nanoalloy. Increasing the ratio of Au:Pd in the nanoalloy from 1:1 to 10:1 lowered the activity by a factor of six but had a positive effect on selectivity. From this, we postulate dissociation absorption of molecular oxygen to the reactive oxides occurs more effectively on the Pd metal surface. With higher Au loading, the acetaldehyde selectivity remained above 90% even at higher reaction temperatures of 160 °C. This led to a postulation of quick desorption of acetaldehyde from the Au surface more than it does on the Pd surface.

Graphical Abstract

Open image in new window

     

Reinterpretation of the mechanical reinforcement of polymer nanocomposites reinforced with cellulose nanorods

The mechanical reinforcement of nanocomposites containing nanorods‐like fillers such as cellulose nanocrystals (CNCs) is often interpreted by adapting the classical parallel–series model, assuming a simple hyperbolic dependence between the percolation threshold and aspect ratio. However, such assumptions are valid only for nanorods with high aspect ratio and often are misinterpreting the reinforcement obtained at low volume fraction of filler loading. To elucidate this intriguing scenario, we proposed a new approach and validated it by compiling and reinterpreting some of available literature that represent the experimental reinforcement with CNCs. Our approach showed better accuracy, specifically for the cases of CNC nanorods with lower aspect ratio. We conclude that this route permits a more realistic evaluation of the mechanical reinforcement, where a physical parameter accounting the polymer filler association is introduced. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45254.     

Polypropylene composite reinforced with fibrillated curaua fiber and using maleic anhydride as coupling agent

Curaua fibers (CF) were fibrillated using high‐intensity ultrasonication, which is fast and uses water as a solvent. The fibrillated fibers (CF_f) were used as reinforcement (20 wt %) in polypropylene composites processed by extrusion with or without 2 wt % of polypropylene grafted with maleic anhydride (PPMA). Fibrillation promotes an increase from 11.3 to 33.8 in the aspect ratio of the fiber. Sonication caused extraction of lignin and a decrease in the degree of crystallinity of the CF. Extrusion of the composites causes no additional fibrillation of the CF. A composite reinforced with CF_f had tensile and flexural strength of 24.9% and 51.5%, respectively, higher than that of pristine PP. The use of PPMA and CF_f in the composite promotes a further increase of 30% and 50.5% in these parameters, respectively. A thermal analysis of the composites using CF_f with or without PPMA showed similar behavior. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44913.     

Design of different planar geometries of antenna arrays for isoflux radiation in GEO satellites

The synthesis of different planar geometries of antenna arrays for isoflux radiation is presented in this paper. This synthesis considers the reduction of the side lobe level and the isoflux radiation requirements for Geostationary Earth Orbit satellites. The behavior of the radiation is studied in three geometries of two-dimensional antenna arrays such as uniform planar arrays, aperiodic planar arrays (APA) and concentric ring arrays (CRA). The well-known methods of genetic algorithm and particle swarm optimization are utilized for the optimization problem. In this way, the designs of APA and CRA presented in this paper could provide an acceptable solution for reducing the antenna hardware and simplifying the power feeding even more than results presented previously in the literature.     

Determination of Sulphiting Agents in Raw and Processed Meat: Comparison Between a Modified Monier-Williams Method and the Direct Analysis by Ion Chromatography with Conductometric Detection

Sulphiting agents are a class of compounds that are used as preservatives since they release SO₂ in food. Regarding meat products, the legislation restricts the use of these food additives, due to some toxic effects that they may have in humans. The most employed analytical procedure for the determination of sulphiting agents in foodstuffs is the Monier-Williams (M-W) method, but the reliability of this method was called into question by several authors. In this work, the M-W method was modified by replacing both the distillation unit to shorten the extraction time (from hours to 5 min) and the final titration with a chromatographic separation followed by conductometric detection of sulphate ion (m-M-W/IC-CD). This method was then validated, and the performance parameters were compared with those of the method based on the direct analysis of sulphite ion by ion chromatography with conductometric detection (DIC-CD). Linearity, accuracy at 40 and 80 mg kg^?1 of SO₂ and measurement uncertainty resulted comparable. Accuracy at 10 mg kg^?1 of SO₂ resulted higher for the m-M-W/IC-CD method, but this parameter could be influenced by traces of other sulphur-containing compounds that may be present in meat. The limit of determination of the m-M-W/IC-CD method was slightly higher than that obtained by the DIC-CD method. Finally, through spiking tests, it was proved that sulphide, 2-methyl-3-furanthiol and l-methionine cause “false-positive” responses, by using M-W-based methods.     

Efficiency Enhancement of Single‐Walled Carbon Nanotube‐Silicon Heterojunction Solar Cells Using Microwave‐Exfoliated Few‐Layer Black Phosphorus

Carbon nanotube‐silicon (CNT‐Si)‐based heterojunction solar cells (HJSCs) are a promising photovoltaic (PV) system. Herein, few‐layer black phosphorus (FL‐BP) sheets are produced in N‐methyl‐2‐pyrrolidone (NMP) using microwave‐assisted liquid‐phase exfoliation and introduced into the CNTs‐Si‐based HJSCs for the first time. The NMP‐based FL‐BP sheets remain stable after mixing with aqueous CNT dispersion for device fabrication. Due to their unique 2D structure and p‐type dominated conduction, the FL‐BP/NMP incorporated CNT‐Si devices show an impressive improvement in the power conversion efficiency from 7.52% (control CNT‐Si cell) to 9.37%. Our density‐functional theory calculation reveals that lowest unoccupied molecular orbital (LUMO) of FL‐BP is higher in energy than that of single‐walled CNT. Therefore, we observed a reduction in the orbitals localized on FL‐BP upon highest occupied molecular orbital to LUMO transition, which corresponds to an improved charge transport. This study opens a new avenue in utilizing 2D phosphorene nanosheets for next‐generation PVs.