Efficiency Enhancement of Single‐Walled Carbon Nanotube‐Silicon Heterojunction Solar Cells Using Microwave‐Exfoliated Few‐Layer Black Phosphorus

Carbon nanotube‐silicon (CNT‐Si)‐based heterojunction solar cells (HJSCs) are a promising photovoltaic (PV) system. Herein, few‐layer black phosphorus (FL‐BP) sheets are produced in N‐methyl‐2‐pyrrolidone (NMP) using microwave‐assisted liquid‐phase exfoliation and introduced into the CNTs‐Si‐based HJSCs for the first time. The NMP‐based FL‐BP sheets remain stable after mixing with aqueous CNT dispersion for device fabrication. Due to their unique 2D structure and p‐type dominated conduction, the FL‐BP/NMP incorporated CNT‐Si devices show an impressive improvement in the power conversion efficiency from 7.52% (control CNT‐Si cell) to 9.37%. Our density‐functional theory calculation reveals that lowest unoccupied molecular orbital (LUMO) of FL‐BP is higher in energy than that of single‐walled CNT. Therefore, we observed a reduction in the orbitals localized on FL‐BP upon highest occupied molecular orbital to LUMO transition, which corresponds to an improved charge transport. This study opens a new avenue in utilizing 2D phosphorene nanosheets for next‐generation PVs.     

Meteorological and oceanographic conditions in the northern Adriatic Sea during the period June 1999-July 2002: influence on the mucilage phenomenon

Mucilage events (formation of very large organic aggregates and gelatinous surface layers) have been documented several times during the past two centuries in the northern Adriatic Sea (NA), while their frequency has significantly increased since 1988. In this work, meteorological and oceanographic conditions in the NA during the period June 1999-July 2002 are described and their relation to the outbreak and fate of the mucilage phenomenon was investigated. Salinity and temperature data were collected during approximately monthly cruises along three transects in the NA. Relevant meteorological situations (air temperature, rainfall, wind) were selected from large-scale ECMWF analyses and from the Local Analysis and Prediction System (LAPS; Emilia Romagna Meteorological Service), while sea conditions (waves) were analysed by means of the Wave Adriatic Model (WAM). Data for air temperature, rainfall, and wind from several meteorological stations in the region were used. Average seasonal cycles of sea temperature and salinity simulated with statistical models, based on historical data collected in the NA since 1972, were used to determine thermal and haline anomalies. The monthly anomaly variability of maximum and minimum air temperatures, rainfall amount and number of rainy days did not appear to be relevant for the mucilage phenomenon outbreak. In contrast, both vertical and horizontal thermohaline gradients in the region were more developed during late spring and summer of 2000 and particularly of 2002, when the mucilage events were of greatest extent in space and time, compared to 2001 (short-lived event) and 1999 (no event). These more pronounced gradients were due to a combination of several unusual conditions: sharp heating of the sea surface in May-June, domination of eastwards transport of freshened waters formed in the Po Delta area, and intrusion of very high salinity intermediate waters originating in the eastern Mediterranean. Moreover, in winter of both 2000 and 2002 very dense and cold water formed and remained in the bottom layer until spring, contributing to increase the stratification degree of the water column. The duration of the mucilage events and their spatial distribution in the region depend strongly on meteorological changes. Recurrent anticyclonic conditions, characterized by low wind and calm sea, favour extended events in time (up 2 months in 2002). In contrast, highly perturbed weather, particularly due to strong "bora" wind, can be determined in sharp decay of the event (e.g. in July 2000).     

Effects of simulated deposition of acid mist and iron ore particulate matter on photosynthesis and the generation of oxidative stress in Schinus terebinthifolius Radii and Sophora tomentosa L

Particulate matter is a natural occurrence in the environment, but some industries, such as the iron ore sector, can raise the total amount of particles in the atmosphere. This industry is primarily a source of iron and sulfur dioxide particulates. The effects of the pollutants from the iron ore industries on representatives of restinga vegetation in a Brazilian coastal ecosystem were investigated using physiological and biochemical measures. Two species, Schinus terebinthifolius and Sophora tomentosa, were exposed to simulated deposition of acid mist and iron ore particulate matter in acrylic chambers in a greenhouse. Parameters such as gas exchange, fluorescence emission, chlorophyll content, total iron content, antioxidant enzyme activity and malondialdehyde content were assessed in order to evaluate the responses of the two species. Neither treatment was capable of inducing oxidative stress in S. terebinthifolius. Nevertheless, the deposition of iron ore particulates on this species increased chlorophyll content, the maximum quantum efficiency of photosystem II and the electron transport rate, while iron content was unaltered. On the other hand, S. tomentosa showed a greater sensitivity to the treatments. Plants of S. tomentosa that were exposed to acid mist had a decrease in photosynthesis, while the deposition of iron particulate matter led to an increase in iron content and membrane permeability of the leaves. The activities of antioxidant enzymes, such as catalases and superoxide dismutase, were enhanced by both treatments. The results suggested that the two restinga species use different strategies to overcome the stressful conditions created by the deposition of particulate matter, either solid or wet. It seems that while S. terebinthifolius avoided stress, S. tomentosa used antioxidant enzyme systems to partially neutralize oxidative stress. The findings also point to the potential use of S. tomentosa as a biomarker species under field conditions.     

Integrating monitoring networks to obtain estimates of ground-level ozone concentrations --a proof of concept in Tuscany (central Italy)

Prior to 2000 a network of conventional ozone (O3) analysers existed in the Province of Firenze (Tuscany, central Italy). Between 2000 and 2004 the network was extended to incorporate a newly designed bioindicator network of tobacco plants (Nicotiana tabacum Bel W3). The objective was to set-up an integrated monitoring system to obtain estimates of ground-level O3 concentrations over the whole study area (3513 km2) in order to fill data gaps and cover reporting requirements. The existing conventional monitors were purposefully located mainly in urban areas. A total of 45 biomonitoring sites were selected using a systematic design to cover the target area. Two to five additional biomonitoring sites were co-located with conventional O3 analysers for calibration purposes, and five more sites for independent validation of modelled O3 concentrations. Visible Leaf Injury Index (LII) on the tobacco plants was significantly correlated (P: 0.018/0.0014) with a series of O3 exposure variables (mean of weekly 1-hour maxima, M1; mean of 7-hour means, M7; 24-hour mean, M24; and weekly AOT40). LII was found to be a significant predictor of weekly means of the O3 exposure variables with a standard error of estimates between 13.6 and 24.3 microg m(-3) (absolute values). LII was mapped with an ad-hoc spatial model over the study area at a 22 km grid resolution, and mapped values were used to predict O3 concentrations by means of a first order linear model. Results showed that high estimates of O3 (up to 188 microg m(-3) as mean of weekly maxima, M1) occurred more frequently in hilly and mountainous areas, with a spatial pattern changing on an annual basis. Predicted O3 concentrations were not significantly different from the measured concentrations (P: 0.34), although marked differences were observed for individual sites and years. The study provided evidence that integration of monitoring networks using different methods can be a viable option to obtain estimates of O3 concentrations over large areas.     

Ambient levels of nitrogen dioxide (NO2) may reduce pollen viability in Austrian pine (Pinus nigra Arnold) trees--correlative evidence from a field study

A fully randomized sampling design was adopted to test whether pollen viability of Austrian pine (Pinus nigra Arnold) was impacted by NO(2) pollution. Spatial strata (500500 m each) with high (41.9-44.6 microg m(-3)) and low (15.4-21.0 microg m(-3)) NO(2) were selected from a defined population in a small area (236.5 km(2), <200 m range in elevation) in Northern Italy. Pollen viability was measured by means of the Tetrazolium (TTC) test. Analysis of variance by means of a generalised linear model showed that NO(2) was a significant factor (P=0.0425) affecting pollen viability. Within the treatment, no significant differences were detected among replicates. Within each replicate, sampling unit data were significantly different (P=0.000) and this suggested some improvement in the applied sampling design was needed. Pollen viability was significantly related to pollen germination (P<0.01) and tube length (P<0.01). This suggested a possible impact of NO(2) on the regeneration of Austrian pine in polluted environments.     

Anaerobic digestion of olive mill wastewaters in biofilm reactors packed with granular activated carbon and "Manville" silica beads

Anaerobic digestion is one of the most promising technologies for disposing olive mill wastewaters (OMWs). The process is generally carried out in the conventional contact bioreactors, which however are often unable to efficiently remove OMW phenolic compounds, that therefore occur in the effluents. The possibility of mitigating this problem by employing an anaerobic OMW-digesting microbial consortium passively immobilized in column reactors packed with granular activated carbon (GAC) or "Manville" silica beads (SB) was here investigated. Under batch conditions, both GAC- and SB-packed-bed biofilm reactors exhibited OMW COD and phenolic compound removal efficiencies markedly higher (from 60% to 250%) than those attained in a parallel anaerobic dispersed growth reactor developed with the same inoculum; GAC-reactor exhibited COD and phenolic compound depletion yields higher by 62% and 78%, respectively, than those achieved with the identically configured SB-biofilm reactor. Both biofilm reactors also mediated an extensive OMW remediation under continuous conditions, where GAC-reactor was much more effective than the corresponding SB-one, and showed a tolerance to high and variable organic loads along with a volumetric productivity in terms of COD and phenolic compound removal significantly higher than those averagely displayed by most of the conventional and packed-bed laboratory-scale reactors previously proposed for the OMW digestion.     

The mechanical behaviour of aluminium foam structures in different loading conditions

The use of foam has the potential for energy absorption enhancement. Many types of materials can be produced in the form of foams, including metals and polymers. Of the metallic based foams, aluminium based are among the most advanced. Aluminium foams couple good specific mechanical properties with high thermal stability. Among the various aspects still to be investigated regarding their mechanical behaviour is the influence of a hydrostatic state of stress on yield strength. Unlike metals, the hydrostatic component affects yields. Therefore, different loading conditions have to be considered to fully identify the material behaviour. Another important issue in foam structure design is the analysis of composite structures. The mechanical behaviour of an aluminium foam has been examined. The foam was subjected to uniaxial, hydrostatic stress, pure deviatoric stress, and combinations thereof. Results obtained will be presented as quasi-static and dynamic uniaxial compression and quasi-static bending and shear loading. Moreover, composite structures were made by assembling the foam into aluminium cold extruded closed section 6060 aluminium tubes. The results show that the energy absorption capability of the composite structures is much greater than the sum of the energy absorbed by the two components, the foam and the tube.