High-resolution venography of the brain using magnetic resonance imaging

The purpose of this study was to evaluate a non-flow related magnetic resonance imaging method to visualize small veins independent of arteries in the human brain. A long TE, high-resolution 3D gradient echo MR acquisition was used to highlight venous information. The method is based on the paramagnetic property of deoxyhemoglobin and the resulting phase difference between veins and brain parenchyma at long echo times. The MR magnitude images were masked with a phase mask filter to enhance small structure visibility.. Venous information down to sub-pixel vessel diameters of several hundred microns is visible. Venous data are displayed in an angiographic manner using a minimum intensity projection algorithm. Both superficial veins and deep white matter veins are visible. The method has been successfully applied in volunteers. Preliminary results in patients with cerebral arteriovenous malformations indicate its potential in clinical applications. The proposed method is easy to implement and does not require administration of a contrast agent or application of specially designed rf pulses to highlight the veins. Rather it exploits the intrinsic magnetic properties (BOLD-effect) and the prolonged T ^_2* of venous blood. The method may be of diagnostic potential in the assessment of arteriovenous malformations or other vascular venous lesions. © 1998 Elsevier Science B.V. All rights reserved.     

Fiber continuity: an anisotropic prior for ODF estimation

The accurate and reliable estimation of fiber orientation distributions, based on diffusion-sensitized magnetic resonance images is a major prerequisite for tractography algorithms or any other derived statistical analysis. In this work, we formulate the principle of fiber continuity (FC), which is based on the simple observation that the imaging of fibrous tissue implies certain expectations for the measured images. From this principle we derive a prior for the estimation of fiber orientation distributions based on high angular resolution diffusion imaging (HARDI). We demonstrate on simulated, phantom, and in vivo data the superiority of the proposed approach. Further, we propose another application of the FC principle, named FC flow, a method to resolve complex crossing regions solely based on diffusion tensor imaging (DTI). The idea is to infer directional information in crossing regions from adjacent anisotropic areas.     

Audio-biofeedback for balance improvement: an accelerometry-based system

This paper introduces a prototype audio-biofeedback system for balance improvement through the sonification using trunk kinematic information. In tests of this system, normal healthy subjects performed several trials in which they stood quietly in three sensory conditions while wearing an accelerometric sensory unit and headphones. The audio-biofeedback system converted in real-time the two-dimensional horizontal trunk accelerations into a stereo sound by modulating its frequency, level, and left/right balance. Preliminary results showed that subjects improved balance using this audio-biofeedback system and that this improvement was greater the more that balance was challenged by absent or unreliable sensory cues. In addition, high correlations were found between the center of pressure displacement and trunk acceleration, suggesting accelerometers may be useful for quantifying standing balance.     

Molds and Resists Studies for Nanoimprint Lithography of Electrodes in Low-Voltage Polymer Thin-Film Transistors

A low-cost patterning of electrodes was investigated looking forward to replacing conventional photolithography for the processing of low-operating voltage polymeric thin-film transistors. Hard silicon, etched by sulfur hexafluoride and oxygen gas mixture, and flexible polydimethylsiloxane imprinting molds were studied through atomic force microscopy (AFM) and field emission gun scanning electron microscopy. The higher the concentration of oxygen in reactive ion etching, the lower the etch rate, sidewall angle, and surface roughness. A concentration around 30 % at 100 mTorr, 65 W and 70 sccm was demonstrated as adequate for submicrometric channels, presenting a reduced etch rate of 176 nm/min. Imprinting with positive photoresist AZ1518 was compared to negative SU-8 2002 by optical microscopy and AFM. Conformal results were obtained only with the last resist by hot embossing at 120 °C and 1 kgf/cm² for 2 min, followed by a 10 min post-baking at 100 °C. The patterning procedure was applied to define gold source and drain electrodes on oxide-covered substrates to produce bottom-gate bottom-contact transistors. Poly(3-hexylthiophene) (P3HT) devices were processed on high-κ titanium oxynitride (TiO _x N _y ) deposited by radiofrequency magnetron sputtering over indium tin oxide-covered glass to achieve low-voltage operation. Hole mobility on micrometric imprinted channels may approach amorphous silicon (～0.01 cm²/V s) and, since these devices operated at less than 5 V, they are not only suitable for electronic applications but also as sensors in aqueous media.     

Lone‐Pair‐Induced Covalency as the Cause of Temperature‐ and Field‐Induced Instabilities in Bismuth Sodium Titanate

Bismuth sodium titanate (BNT)‐derived materials have seen a flurry of research interest in recent years because of the existence of extended strain under applied electric fields, surpassing that of lead zirconate titanate (PZT), the most commonly used piezoelectric. The underlying physical and chemical mechanisms responsible for such extraordinary strain levels in BNT are still poorly understood, as is the nature of the successive phase transitions. A comprehensive explanation is proposed here, combining the short‐range chemical and structural sensitivity of in situ Raman spectroscopy (under an applied electric field and temperature) with macroscopic electrical measurements. The results presented clarify the causes for the extended strain, as well as the peculiar temperature‐dependent properties encountered in this system. The underlying cause is determined to be mediated by the complex‐like bonding of the octahedra at the center of the perovskite: a loss of hybridization of the 6s² bismuth lone pair interacting with the oxygen p‐orbitals occurs, which triggers both the field‐induced phase transition and the loss of macroscopic ferroelectric order at the depolarization temperature.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Performance Evaluation of a Bluetooth-Based WLAN Adopting a Polling Protocol Under Realistic Channel Conditions

Even if Bluetooth has not been specifically designated for WLANs (Wireless Local Area Networks) and the interconnection of computers, the possibility of establishing low-cost wireless connections makes this technology attractive for this kind of context also. In this paper we assess, by means of a simulative approach that takes the complete physical and MAC level aspects into account, the performance of a Bluetooth-based WLAN adopting a roll-call polling protocol under realistic channel conditions, that is, in the presence of the typical impairments of indoor wireless communications (fading, etc); moreover, we propose an analytical formulation to derive the maximum throughput offered by a Bluetooth link and we suggest a call admission control technique based on the previous analytical considerations.