Cu/SBA-15 as adsorbent for propane/propylene separation

Samples of mesoporous silica SBA-15 were prepared under hydrothermal conditions where Cu cations were incorporated to the structure by impregnation in order to compare the adsorption behavior in the presence and absence of this element. The adsorption/desorption equilibrium isotherms of propylene, propane, and N₂ were measured to evaluate their usefulness in the propane/propylene separation. All the adsorption isotherms of SBA-15 measured in the absence of Cu cations were described by the Freundlich equation, while the adsorption isotherms of propane on Cu/SBA-15 were better represented by the Henry equation and those of propylene were satisfactorily described by the Langmuir model in the range P < 100 Torr. The adsorption uptake of propylene increased and that of propane decreased in Cu/SBA-15 as compared to the amounts observed in the SBA-15 sample. The presence of Cu atoms in the adsorbent lattice increased the selectivity towards propylene. Under some working conditions the adsorbed amount of propylene in Cu/SBA-15 sample was totally reversible and the propane uptake, negligible.     

In vivo aging of gutta‐percha dental cone

Gutta‐percha cone is the most widely used material for root canal filling. The in vivo aging of this cone focus on the degradation of its main organic component, trans‐1,4‐polyisoprene, was studied. Aged cones (25 samples) from 2 to 30 years of root canal filling were extracted from different patients in the occasion of retreatment by mechanical way. The information about the aging time was given by the patients. Gel‐permeation chromatography (GPC) and infrared spectroscopy (FTIR) were the analytical techniques used. Polyisoprene degrades with time of aging, but in a slow process. Decrease in polymer molar mass from 5.7 × 10⁵ to 1.7 × 10⁵ g/mol was observed in polyisoprene from cone after 30 years of root canal filling and inside a noninfected tooth. In tooth with caries and periodontal infection, the decrease in molar mass is higher (4.6 × 10⁴ g/mol in cone with 10 years of aging). The production of carbonyl and hydroxyl groups in the aged material indicates that the process is oxidative, even in closed teeth. In these cases, the oxygen could be provided from tissue fluid. The degradation mechanism is complex and depends on many factors, besides time of root canal filling. The dental problem caused by the aging could be the production and migration of cytotoxic substances to periodontal ligament and the reduction on the canal sealing property due to the polymer weight loss. Both of them could contribute to the root canal treatment failure. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:4082–4088, 2006     

Semi-interpenetrating polymer networds produced with polyethylene terephthalate oligomer and unsaturated polyester resin

A series of semi-interpenetrating polymer networks (semi-IPN's) based on different compositions of an acyclic polyethylene terephthalate oligomer and unsaturated polyester resin (UP) were prepared. The oligomer was dissolved in the resin containing styrene crosslinker. Later this mixture was crosslinked at room temperature using methyl ethyl ketone peroxide catalyst and cobalt naphtanate as promoter. The tensile strength of the IPN's decreases as the concentration of oligomer increases, whereas, elongation to break increases. A characterization of the oligomer used is also presented.     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

(CO2 + 2‐propanol) mixture as a foaming agent for polystyrene: A simple thermodynamic model for the high pressure VLE‐phase diagrams taking into account the foam vitrification

The equation of state model developed by Lacombe and Sanchez (J Phys Chem 1976, 80, 2352) is used in the form proposed later by Sanchez and Stone (Polymer Blends, Vol. 1: Formulation, 2000; Chapter 2) to correlate experimental vapor‐liquid equilibrium (VLE) data for the three binaries and the ternary systems. Experimental data from the binary systems carbon dioxide‐isopropyl alcohol (CO₂‐IPrOH), isopropyl alcohol‐polystyrene (IPrOH‐PS), and carbon dioxide‐polystyrene (CO₂‐PS) are used to calculate VLE properties for the ternary system CO₂‐IPrOH‐PS. Two‐dimensional VLE‐phase diagrams were calculated and used to describe from a thermodynamic point of view the pressure, volume, and temperature values that characterize a thermoplastic foam evolution process, from the extruder to the foaming die. For different initial mixture CO₂ + IPrOH concentrations, pressure reduction produces liquid foaming until the vitrification curve arrests the final foam volume expansion. The dependence of the vitreous transition with the system CO₂ + IPrOH concentration while foaming is represented by the Chow (Macromolecules 1980, 13, 362) equation. The calculation procedure is proposed as a design tool to reduce the amount of experimental data usually needed as a requirement previous to the design stage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2663–2671, 2007     

Transient measurements of adsorption and diffusion in H-ZSM-5 membranes

A transient permeation method presented here not only determines the adsorption and diffusion properties of the pores that are the transport pathways through zeolite membranes, but nondestructively estimates the effective thickness of the membrane. Transient responses of the permeate concentration to step changes in the feed were measured on two H-ZSM-5 tubular membranes and modeled assuming Maxwell-Stefan diffusion and Langmuir adsorption. The adsorption isotherms determined from these transient measurements at 298 K of N₂ and CO₂ were nearly identical to those measured by calorimetry on H-ZSM-5 powders. The CH₄ isotherm at 298 K was similar to isotherms measured by calorimetry and gravimetric techniques on Na-ZSM-5 and silicalite powders. The similarity of the isotherms indicates that transport of these light gases occurs mainly through zeolite pores. The Maxwell-Stefan diffusion coefficients D_MS depended on concentration and were higher for higher feed partial pressures. Average D_MS values for the two membranes were 7.5, 5 and 1.5×10⁻¹⁰ m²/s for N₂, CH₄, and CO₂, respectively; these are in the same range and order as diffusion coefficients measured in zeolite crystals.     

A 2D algorithm with asymmetric workload for the UPC conjugate gradient method

This paper examines four different strategies, each one with its own data distribution, for implementing the parallel conjugate gradient (CG) method and how they impact communication and overall performance. Firstly, typical 1D and 2D distributions of the matrix involved in CG computations are considered. Then, a new 2D version of the CG method with asymmetric workload, based on leaving some threads idle during part of the computation to reduce communication, is proposed. The four strategies are independent of sparse storage schemes and are implemented using Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. The strategies are evaluated on two different platforms through a set of matrices that exhibit distinct sparse patterns, demonstrating that our asymmetric proposal outperforms the others except for one matrix on one platform.     

HDPE/LLDPE reactor blends with bimodal microstructures—Part II: rheological properties

Reactor blends of polyethylene/poly(ethylene-co-1-octene) resins with bimodal molecular weight and bimodal short chain branching distributions were synthesized in a two-step polymerization process. The compositions of these blends range from low molecular weight (LMW) homopolymer to high molecular weight (HMW) copolymer and vice versa HMW homopolymer to LMW copolymer. The shear flow characteristics of these polymers in the typical processing range mostly depend on the molecular weight and MWD of the polymer and are independent of the short chain branch content. From oscillatory shear measurements, it was observed that the viscosity of HMW polymers was reduced with the addition of LMW material. For the polymers produced with this two-step polymerization process, the LMW homopolymer and HMW copolymer blends and HMW homopolymer and LMW copolymer blends were melt miscible, despite the large viscosity differences of the pure components.     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Microporous anisotropic phase inversion membranes from bisphenol A polycarbonate: Effect of additives to the polymer solution

Phase inversion is a very flexible technique to obtain membranes with a large sort of morphologies. Membrane properties can vary greatly depending on the kind of polymer system used. Bisphenol A polycarbonate (PC) could be used as a phase inversion membrane base polymer, and presents very good properties. Nevertheless, very little information on membrane preparation using PC and the phase inversion process can be found in the literature. In this work flat‐sheet microporous membranes were obtained by the phase inversion process using the immersion precipitation technique. A new polymer system was studied, consisting of polycarbonate, N‐methyl‐2‐pyrrolidone as solvent, water as the nonsolvent, and an additive. The influence of some parameters on membrane morphology, such as polymer solution composition, exposition time before immersion into the precipitation bath, and the kind of additive was investigated. Precipitation was followed using light transmission experiments and membrane morphology was observed through Scanning Electron Microscopy (SEM). The viscosity and cloud points of all polymer solutions were also determined. The results were related to the studied synthesis parameters, using the basic principles of membrane formation by the phase inversion technique, looking forward to establishing criteria to control the morphology of flat‐sheet membranes using polycarbonate as the base polymer. The results showed that both additives were able to increase pore interconnectivity and even suppress macrovoid formation. The decrease in the miscibility region of the polymer system and increase in mass transfer resistance are found to be the determining factors during polymer solution precipitation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3085–3096, 2002