Two-Way Protocol with Imperfect Devices

The security of a deterministic quantum scheme for communication, namely the LM05 [1], is studied in presence of a lossy channel under the assumption of imperfect generation and detection of single photons. It is shown that the scheme allows for a rate of distillable secure bits higher than that pertaining to BB84 [2]. We report on a first implementation of LM05 with weak pulses.     

Scale Transition in Steel-Concrete Interaction. II:?Applications

The proposed mode of consideration of the steel-concrete interaction (Part I) is applied to real-life engineering structures. Two structures recently investigated numerically at Vienna University of Technology are considered: (1) the reinforced concrete (RC) cooling tower III Ptolema?s SES (Greece) and (2) a part of the shotcrete tunnel lining installed at the Lainzer tunnel (Austria). In both examples, the uniaxial fracture criterion used in Part I is replaced by the maximum stress (Rankine) criterion. Together with the Drucker-Prager criterion, which is used for the simulation of compressive failure of concrete/shotcrete, it defines the space of admissible stress states in the framework of multisurface plasticity. For the simulation of early-age fracture of shotcrete, consideration of the steel-concrete interaction presented in Part I of this paper is extended towards young shotcrete. Similar to the benchmark problem investigated in Part I of this paper, several analyses with different degrees of consideration of the steel-concrete interaction are performed. The obtained results give insight into the influence of the steel-concrete interaction on the load-carrying behavior of the investigated structures.     

Towards mesoscopic thermodynamics: Small systems in higher-order states

A higher-order generalization of the usual thermodynamic formalism is presented for systems with the number of particlesN large in comparison with 1, but sufficiently small that one or many higher-order fluctuations of energy (or other observables) are measurable, directly or indirectly. Then 1 «N «N _A , whereN _A is the Avogadro number, andn2, wheren is the highest order of fluctuations (central statistical moments). The systems are then open, finite and compact, and they have compact boundary surfaces, so that the energy is non-additive and temperatures are non-intensive, in general. Such systems will be called comesoscopic, while a finite or infinite super-system of such systems will be called mesoscopic. Three ideal models of comesoscopic systems are discussed in detail with one or two higher-order temperatures. General conclusions concerning hierarchical composite systems are drawn afterwards.

相似文献   

Quantitative aspects of two methods to dissolve collagen-free muscle proteins from acetone dry powders of Guelders ring sausage

Summary The purpose of this study was to find experimental conditions for the complete solubility of collagen-free muscle proteins (CFMP) using acetone powder of Guelders ring sausage. Preliminary experiments were carried out to choose the best procedure for preparing the acetone dry powder. Two different methods of acetone extraction of minced sausage were compared. The acetone dry mass (ADM) method using continuous extraction in a Soxhlet [2] apparatus gave better results than the acetone powder (ACP) method, which used a blender [1]. The ADM method was used for further investigations. ADM was extracted with two types of sodium dodecyl sulphate (SDS), containing solvents A and B. Solvent A contains a Tris-boric acid buffer (pH 8.2) with 1.5% (m/v) SDS and 0.05% (m/v) dithioerythreitol [3]. Solvent B is a borate-chloric acid buffer (pH 9.0) with 2.0% (m/v) SDS and 1.0% (m/v) mercapto-ethanol [2]. Both solvents showed a linear relationship between the quantities of CFMP in ADM and the dissolved CFMP. The linear relationships were found between quantities of 10.0 and 30.0 mg (solution A) and of 5.0 and 30.0 mg ADM (solution B) per ml solvent. The solubility of CFMP was better in solvent B than in solution A. Completely dissolved CFMP from ADM was only obtained in the case of 5.0 mg ADM in 1.0 ml solution B. These conditions will be used in liquid chromatography experiments, the results of which will be reported later.

---

Quantitative Aspekte zweier Verfahren für das Auflösen kollagenfreier Muskelproteine aus acetontrockenen Pulvern der Gelderschen Rauchwurst

Zusammenfassung Der Zweck dieser Untersuchungen ist, die experimentellen Bedingungen für die vollstän-dige Löslichkeit des kollagenfreien Muskelproteins (CFMP) aus dem Acetonpulver der Gelderschen Rauchwurst zu finden. Durch Vorversuche wurde die beste Arbeitsweise für das Zubereiten des Acetonpulvers gewählt. Zwei verschiedene Extraktionsverfahren mit zerkleinertem Wurstmaterial wurden miteinander verglichen. Die Methode mit der Acetontrockenmasse (ADM) mittels kontinuierlicher Extraktion [2] führte zu besseren Ergebnissen als die Methode mit Acetonpulver (ACP), wozu ein Mischgerät [1] verwendet wurde. Die ADM-Methode wurde für weitere Untersuchungen angewendet. ADM wurde mit zwei verschiedenen Extraktionslösungen von Natrium-Dodecylsulfat (SDS) (A und B) extrahiert. Lösung A enthalt einen Tris-Borsäure Puffer (pH 8,2) mit SDS (1,5%) und Dithioerithritol (0,05%) [3]. Die Lösung B enthält einen Borat-Salzsäure Puffer (pH 9,0) mit SDS (2,0%) und Mercapto-Ethanol (1,0%) [2]. Beide Extraktionslösungen zeigen ein lineares Verhalten zwischen den Mengen vom CFMP in ADM und in aufgelöstem CFMP. Diese Linearität wurde von 10,030,0 mg ADM (Lösungsmittel A) und von 5,030,0 mg ADM (Lösungsmittel B) gefunden. Die Lös-lichkeit in Lösung B ist gegeniiber Lösung A besser. Ein vollständig gelöstes CFMP aus ADM wurde nur bei der Extraktion von 5,0 mg ADM in 1,0 ml der Losung B erhalten. Diese Bedingung soll in unseren künftigen flüssigchromatographischen Experimenten verwendet werden.

---

---

Supported by a grant from the Hoofdinspectie Levensmiddelen of the Ministry of Welzijn, Volksgezondheid en Cultuur     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Bulk and suspension polymerization of styrene in the presence of n-pentane. An evaluation of monofunctional and bifunctional initiation

The plasticizing effect of n-pentane on the rate of bulk free radical polymerization of styrene and molecular weight distribution development has been modeled on the basis of the free volume theory for both monofunctional and bifunctional initiation. A strong decrease in the reaction rate in the late stages of the polymerization, due to the displacement of the onset of the gel effect, has been observed for both types of initiation. This decrease in the polymerization rate limited the terminal conversion to values well below 100% for mono-functional initiation. However, in bifunctionally initiated polymerization, terminal conversions close to 100% were obtained in spite of the decrease in reaction rate. Contrary to what was expected, the molecular weight distribution obtained at terminal conversion was almost completely insensitive to these changes in polymerization rate. This phenomenon is explained in terms of limited transfer to monomer reactions when n-pentane is present in the system. In suspension polymerization, the limiting conversion and plasticizing effects of n-pentane in monofunctionally initiated systems, caused enhanced coalescence leading to suspension set-up. In bifunctionally initiated systems this enhanced coalescence was completely overcome by the short duration of the particle growth stage, owing to high polymerization rates, and stable suspensions were achieved. For these systems the particle size distributions obtained were similar to that of suspension polystyrene without n-pentane. © 1993 John Wiley & Sons, Inc.     

Information Sharing Among Disaster Responders - An Interactive Spreadsheet-Based Collaboration Approach

Recent natural disasters have led crisis management organizations to revise their protocols so as to rely on the contribution of a wider range of actors, including simple citizens as well as expert operators, to support decision making activities. Reliable and timely information sharing among members of distributed teams of disaster responders has become paramount for the success of the overall crisis management process. In this paper we propose a crisis management system based on spreadsheet-mediated collaboration among on-site responders and decision makers. To share data a common spreadsheet artifact has been developed by using a participatory design approach which is accessed through mobile user interfaces. The evaluation results showed that the use of the spreadsheet artifact has resulted in more effective decision making relating to set of earthquake management scenarios in high-risk areas located in Italy.     

Geschäftsmodelle

The business model concept, although a relatively new topic for research, has garnered growing attention over the past decade. Whilst it has been robustly defined, the concept has so far attracted very little substantive research. In the context of the wide-spread digitization of businesses and society at large, the logic inherent in a business model has become critical for business success and, hence, a focus for academic inquiry. The business model concept is identified as the missing link between business strategy, processes, and Information Technology (IT). The authors argue that the BISE community offers distinct and unique competencies (e.g., translating business strategies into IT systems, managing business and IT processes, etc.) that can be harnessed for significant research contributions to this field. Within this research gap three distinct streams are delineated, namely, business models in IT industries, IT enabled or digital business models, and IT support for developing and managing business models. For these streams, the current state of the art, suggest critical research questions, and suitable research methodologies are outlined.     

Cholesterol synthesis and esterification in isolated enterocytes: Regulation by cholesterol and cholestyramine feeding

The purpose of the present study was to investigate the physiological control of the main regulatory enzymes of cholesterol metabolism in isolated enterocytes obtained from chick duodenum, jejunum and ileum. Cholesterol feeding resulted in an inhibition of 3-hydroxy-3-methylglutaryl-CoA reductase and mevalonate 5-pyrophosphate decarboxylase, while cholestyramine feeding increased reductase activity in all the regions studied and decarboxylase activity only in duodenum. Cholesterol feeding markedly increased acyl-CoA:cholesterol acyltransferase, but the effects of cholestyramine were less clear. The effects on transferase activity cannot be due to differences in the availability of acyl-CoA as exogenous substrate as no significant differences were found in acyl-CoA hydrolase activity after any of the dietary treatments. The effects of cholesterol feeding were related to changes in the cholesterol content of epithelial cells, whereas in the case of cholestyramine this relationship was less apparent.     

4D video textures for interactive character appearance

4D Video Textures (4DVT) introduce a novel representation for rendering video‐realistic interactive character animation from a database of 4D actor performance captured in a multiple camera studio. 4D performance capture reconstructs dynamic shape and appearance over time but is limited to free‐viewpoint video replay of the same motion. Interactive animation from 4D performance capture has so far been limited to surface shape only. 4DVT is the final piece in the puzzle enabling video‐realistic interactive animation through two contributions: a layered view‐dependent texture map representation which supports efficient storage, transmission and rendering from multiple view video capture; and a rendering approach that combines multiple 4DVT sequences in a parametric motion space, maintaining video quality rendering of dynamic surface appearance whilst allowing high‐level interactive control of character motion and viewpoint. 4DVT is demonstrated for multiple characters and evaluated both quantitatively and through a user‐study which confirms that the visual quality of captured video is maintained. The 4DVT representation achieves >90% reduction in size and halves the rendering cost.