Direct ESR and spin trapping methods for the detection and identification of radical fragments in Nafion membranes and model compounds exposed to oxygen radicals

Direct electron spin resonance (ESR) and spin trapping methods are used in our laboratory in order to identify radical fragments in fluorinated membranes (Nafion) used in fuel cells and in model compounds when exposed to reactive oxygen species. Oxygen radicals were generated by the Fenton reaction, by the photo-Fenton method, and by UV-irradiation of aqueous H₂O₂ solutions. Direct ESR detection led to the identification of fluorinated radical fragments in UV-irradiated Nafion neutralized by Cu(II), Fe(II), and Fe(III) cations and exposed to H₂O₂. In Nafion exposed to the Fenton reagent in the presence of DMPO (5,5-dimethyl-1-pyrroline) as the spin trap, radical adducts of hydroxyl and carbon-centered radicals (CCRs) were detected. A fluorinated model compound, perfluro-(2-ethoxyethane) sulfonic acid (CF₃CF₂OCF₂CF₂SO₃H, PFEESA), that mimics the side chain of Nafion was chosen for study, with the goal to shed light on the more complicated degradation processes in the polymeric membranes. Analysis of the spin adducts obtained from UV-irradiated PFEESA in the presence of H₂O₂ and MNP (2-methyl-2-nitrosopropane) as the spin trap suggested that the side chain of Nafion is a possible site of attack by oxygen radicals.     

Modelling water cooling of steel strip during hot rolling

Several tests of water cooling of steel samples are presented in the paper. The water spray and quenching conditions are considered. The temperature variations during the tests are monitored using the thermocouples embedded in the side of the samples. The experimental time – temperature profiles are compared with the results of calculations based on the finite element model. Comparison of the theoretical and experimental results allowed to suggest heat transfer coefficients of 10000 W/m²K for water in quenching, 6000 W/m²K for the top surface during water spray cooling and 4000 W/m²K for the bottom surface during water spray cooling.     

Cellular and mediator profile in bronchoalveolar lavage of guinea pigs after toluene diisocyanate (TDI) exposure

Toluene diisocyanate (TDI) is a volatile, highly reactive chemical widely used as a polymerizing agent in the production of polyurethane foams, lacquers, adhesives, and other items. Repeated airway exposures in the workplace to TDI may cause a concentration-dependent risk of developing chronic airway disorders. Different pathomechanisms are involved. IgE-mediated sensitization and irritative effects were clearly demonstrated in exposed subjects as well as in animals. In this study we examined the cellular and mediator composition in bronchoalveolar lavage fluid (BALF) of guinea pigs (eight in each group) exposed to TDI (10, 20, or 30 ppb) on 5 consecutive days for 2 hours each. Increased numbers of eosinophils and significantly elevated levels of LTB4 and LTC4/LTD4/LTE4 were obtained in BALF of all exposed animals when compared to nonexposed control animals. PGD2 and TXB2 remained unaltered in BALF. Stimulation of BALF cells of exposed and control animals with Ca-ionophore A23187 and arachidonic acid induced an increased generation of LTB4. Furthermore, BALF cells of the exposed animal groups generated immunoreactive LTC4/LTD4/LTE4, whereas controls did not show peptido-leukotriene formation in the presence and absence of stimuli. Our data clearly demonstrate an influx of eosinophils into the airways associated with mediator release and higher cellular responsiveness after TDI exposure.     

Nanoscale mechanical properties of polymers irradiated by UV

The application of depth sensing nanoindentation to determine mechanical properties of three different polymers is described in this work using three different techniques to calibrate the measurement system. The nano-hardness and the elastic indentation modulus of polyvinyl chloride, polyethylene oxide and polyacrylic acid were inferred from nanomechanical tests, and the influence of ultraviolet irradiation on the mechanical properties of measured polymers is studied. A multicycling test—a sequence of several loading and unloading procedures—allowed the measurement of changes in the sample viscoelasticity. The nano-hardness of the polymers is shown to increase with radiation dose while the viscoelasticity decreases.     

The influence of carrageenan on the properties of low-fat frankfurters

Research was undertaken to study the technological properties of six carrageenan fractions and their usefulness as fat substitutes in frankfurter type sausages. In the first stage of the experiment hardness of gels made of 3% solutions of carrageenan preparations with different pH (5.5, 6.0 and 6.5) was evaluated. The highest F_max. values were noted in gels obtained from G-WG carrageenan (kappa I fraction). In the second stage of the study frankfurter type sausages were produced, containing 20% and 10% of fat in meat batter with or without (control) kappa I carrageenan (G-WG). Carrageenan as a fat substitute caused a reduction in cooking and storage weight losses, increased hardness, gumminess and chewiness. All frankfurters produced with carrageenan, irrespective of fat content, were characterized by significantly higher sensory evaluation scores for texture, color and taste in comparison to control sausages.     

Problem of stress and strain concentration in the entry and exit planes in the drawing process

The paper discusses the problem of stress and strain concentration in the entry and exit planes during the drawing process. Earlier investigations carried out by Pierlin, Pawelski and Armstroff as well as Chen and Kobayashi's finite element analysis are reviewed. Authors’ calculations based on the rigid-plastic finite element approach are compared with experimental and theoretical results published by Pawelski and Armstroff. Solution for rigid-plastic material behaviour confirmed the die pressure increase in the entry and exit zones questioning Pierlin's suggestion that the elastic strains are responsible for pressure concentrations. Analysis of the strain rate distribution led to the presumption that pressure increase is due to the strain rate concentrations in the areas close to the entry and exit zones.     

Temperature field on strip cross-section during hot rolling

The present report presents a mathematical model for the computation of temperature variation over cross-section during hot rolling. In the model discussed the differential equation describing transient heat conduction, where internal heat sources are taken into account, is solved using the method of finite differences. Yield stress distribution along the deformation zone being to be known when determining internal heat source capacity has been found on the basis of methods of heredity theory. The possibilities to apply the method devised have been analysed by computing temperature variation during rolling process, the obtained computation results being then presented in a graphical form.     

Optimized carry lookahead adders with direct feeding

This paper describes improvements to the parallel prefix adder designs and optimization algorithms of Chan, Oklobdzija, Schlag, Thomborson and Wei. Our “direct feeding” (DF) adder design avoids large signal fanouts along critical adder paths. Our “random pruning” heuristic limits the time and space required to find near-optimal DF adders, so that the search process runs in a few minutes on a Sun-4 workstation. Our improved carry lookahead adders are well suited for static CMOS implementation; our improvements may be applied to other parallel prefix CMOS circuits. Simulations with Mentor Graphics' Lsim indicate that our best DIP adders are 12% to 20% faster than the carry lookahead adders presented by Chan et al.