Byzantine robust trust establishment for mobile ad hoc networks

In a mobile ad hoc network (MANET), the nodes act both as traffic sources and as relays that forward packets from other nodes along multi-hop routes to the destination. Such networks are suited to situations in which a wireless infrastructure is unavailable, infeasible, or prohibitively expensive. However, the lack of a secure, trusted infrastructure in such networks make secure and reliable packet delivery very challenging. A given node acting as a relay may exhibit Byzantine behavior with respect to packet forwarding, i.e., arbitrary, deviant behavior, which disrupts packet transmission in the network. For example, a Byzantine node may arbitrarily choose to drop or misroute a certain percentage of the packets that are passed to it for forwarding to the next hop. In earlier work, we proposed a trust establishment framework, called Hermes, which enables a given node to determine the “trustworthiness” of other nodes with respect to reliable packet delivery by combining first-hand trust information obtained independently of other nodes and second-hand trust information obtained via recommendations from other nodes. A deficiency of the Hermes scheme is that a node can fail to detect certain types of Byzantine behavior, such as packet misforwarding directed at a particular source node. In this paper, we propose new mechanisms to make Hermes robust to Byzantine behavior and introduce a punishment policy that discourages selfish node behavior. We present simulation results that demonstrate the effectiveness of the proposed scheme in a variety of scenarios involving Byzantine nodes that are malicious both with respect to packet forwarding and trust propagation.     

Pressure distribution in an assembly of wooden cylinders with various aspect ratios under uniaxial confined compression

Understanding how forces propagate in granular assemblages is important for equipment design and process control in many technologies. Yet, it remains poorly understood. In this study, a cuboidal assembly comprising cylinders of various lengths (aspect ratios AR ranging from 0.9 to 3.6) were subjected to uniaxial confined compression tests. Samples were vertically compressed until the top platen exerted a pressure of 50 kPa on the uppermost particles. This maximum pressure corresponds to the hydrostatic pressure of an approximately 15 m high column of chopped wood that may be encountered in real storage structures. The nonlinear loading curves were obtained depended on the aspect ratios of the cylinders. The modulus of elasticity, calculated from the linear elastic part of the stress–strain curve, monotonically decreased from 10.2 to 8.6 MPa as the aspect ratio increased from 1.2 to 3.6. The elastic modulus and volume fraction exhibited similar trends as functions of the aspect ratio. The horizontal-to-vertical pressure ratio was calculated as the horizontal pressure exerted on the wider walls to the vertical pressure exerted on the top lid during loading–unloading cycles. For ARs up to 3.6, the pressure ratio was approximately 0.31; for the longest cylinders (AR = 3.6), it decreased to approximately 0.27, probably because the assumption of the representative chamber volume was invalidated at this AR.     

Distributed OSGi built over message‐oriented middleware

This paper describes key aspects of remote service invocation in federations of OSGi containers. It refers to the OSGi Remote Service Admin specification and describes its efficient implementation over message‐oriented middleware. Scalability problems of several different approaches to implementation are identified, and a solution in a form of innovative Remote Service Admin model extension is proposed. The extension, named On‐demand Remote Service Admin, is analyzed and validated in the context of a motivating scenario. Validation includes performance and scalability evaluation, which confirms that all assumed requirements have been satisfied by the constructed prototype. Finally, the presented research is compared with related works. Copyright © 2011 John Wiley & Sons, Ltd.     

Problem of stress and strain concentration in the entry and exit planes in the drawing process

The paper discusses the problem of stress and strain concentration in the entry and exit planes during the drawing process. Earlier investigations carried out by Pierlin, Pawelski and Armstroff as well as Chen and Kobayashi's finite element analysis are reviewed. Authors’ calculations based on the rigid-plastic finite element approach are compared with experimental and theoretical results published by Pawelski and Armstroff. Solution for rigid-plastic material behaviour confirmed the die pressure increase in the entry and exit zones questioning Pierlin's suggestion that the elastic strains are responsible for pressure concentrations. Analysis of the strain rate distribution led to the presumption that pressure increase is due to the strain rate concentrations in the areas close to the entry and exit zones.     

Examination of the Transferability of Technological key Features of Paperboard Deep Drawing Towards the Application in Fast‐Running Packaging Machines

The deep‐drawing process of paperboard has experienced essential improvement in the recent past; however, the technological advancements have not been transferred to packaging machines yet. Two of the most important issues with regard to the reliable production of high quality 3D shapes are the use of elevated moisture and defined blank holder force profiles. This paper examines a roll preparation method for applying additional water to the paperboard and analyses a spring‐loaded blank holder solution with regard to its achieved accuracy and reliability of the force characteristics. A two‐sided roll application of water on the paperboard using a sponge rubber cover on one of the rolls produces a water intake of up to 12%. The effect of moisture applied by roll preparation is higher compared to conditioning under controlled climate conditions, and the preparation time is reduced to a few seconds. The spring‐loaded blank holder introduced in the paper completely works in position control and avoids the switch over to force control as well as the problem of small position steps, which were necessary during force control. A harmonic oscillation of the blank holder while the material is drawn out of it could not be observed up to an output of 150 cycles per minute. An application of a roll‐based moisturization unit and a spring‐loaded blank holder force in modern packaging machines appears feasible and favourable according to the results of this paper and maintains the capabilities of this 3D forming technology to a large part. Copyright © 2016 John Wiley & Sons, Ltd.     

A numerical approach for predicting the failure locus of fiber reinforced composites under combined transverse compression and axial tension

A computational model based on the finite element method is presented for the estimation of strength of a fiber-reinforced lamina subjected to a combination of the transverse compression and axial tension. A complex damage mechanism including fiber breakage, fiber/matrix debonding and matrix plastic deformation is reproduced in the proposed model by using appropriate constitutive equations. The numerical simulation of mechanical response of the unidirectional lamina under biaxial loading is used to obtained the failure locus. Subsequently, the model is verified against an analytical solution and experimental data. It was found that the numerical calculations agree better with experimental results than analytical predictions.     

In-vessel composting for utilizing of municipal sewage-sludge

The amount of sludge generated from wastewater treatment plants has been increasing year-by-year as the sewerage service area expanded. The composting process is considered to be one of the best management methods to stabilize different organic wastes. The main goal of this investigation was to find the optimal ratio of the quantity of the organic waste to the quantity of the sewage sludge. The process of composting was carried out in the Horstmann bioreactor (pilot scale) for 2–3 weeks and then in a compost pile for 6–12 weeks. Seven experiments were performed, with different ratios of the quantity of organic wastes to the quantity of sewage sludge. The results enabled an estimation of the quality of compost and its usefulness and also the usefulness of the bioreactor to be deduced.     

High temperature deformation of ceramic particle composites

The particle composites Al₂O₃/(2 and 3Y)TZP and MgAl₂O₄/3Y-TZP were tested in bending at temperature of 1280 °C over strain rates from 3.4 × 10⁻⁷ to 1 × 10⁻⁴ s⁻¹ and over stresses from 23 to 85 MPa. Strain rate of the composites decreased as a volume fraction of Al₂O₃ or MgAl₂O₄ increased. MgAl₂O₄/3Y-TZP composites deformed easier under the comparable conditions than alumina/zirconia composites. Four models of composite creep behaviour were compared to the experimental data. All the models were unsuitable for MgAl₂O₄/3Y-TZP, in turn an isostress, an isostrain and a constrained isostrain models provide the good predictions for creep rates for alumina/zirconia ceramics, but the rheological model appeared not good. The threshold stresses approach seems to be useful for describing superplastic flow of MgAl₂O₄/3Y-TZP composites.