The assessment of microorganism growth in the membrane distillation system

Growth of microorganism in the membrane distillation (MD) system has been evaluated, and their presence on the membrane surface was studied using scanning electron microscopy (SEM) coupled with energy dispersion spectrometry (EDS). The membrane samples were collected from MD modules used for the following applications: concentration of salts and acids, production of demineralized water from tap water, separation of ethanol from fermentation broth in a membrane bioreactor and treatment of saline wastewater containing Pseudomonas and Streptococcus faecalis bacteria and Penicillium and Aspergillus fungi. The MD experiments were performed with polypropylene capillary membranes. SEM examinations of the membranes used for the treatment of saline wastewater indicated a significant amount of S. faecalis bacteria and Aspergillus fungi. The polypropylene membranes used did not reject S. faecalis bacteria, which were detected on the membrane surface on the distillate side. The presence of fungi in the membrane pores was observed only on the feed side. The contamination of the membrane surface by yeast cells was not observed in the case of the membrane bioreactor operated over one year. The running conditions of the MD process (such as elevated temperature, significant salt concentrations and low pH values) inhibited the growth of microorganism in the MD system.     

Influence of a high‐head dam as a dispersal barrier to fish community structure of the Upper Mississippi River

In river systems, high‐head dams may increase the distance‐decay of fish community similarity by creating nearly impermeable dispersal barriers to certain species from upstream reaches. Substantial evidence suggests that migratory species are impacted by dams, and most previous studies in stream/river networks have focused on small streams and headwaters. Here, we assess whether a high‐head dam (Lock and Dam 19; LD 19) on a large river, the Upper Mississippi River (UMR), substantially alters fish community structure relative to variability expected to occur independent of the dam's effect as a fish dispersal barrier. Using fish catch per unit effort data, we modelled the distance‐decay function for the UMR fish community and then estimated the similarity that would be expected to occur across LD19 and compared it with measured similarity. Measured similarity in the fish community above and below LD19 was close to the expected value based on the distance‐decay function, suggesting LD19 does not create an abrupt transition in the fish community. Although some migratory fish species no longer occur above LD19 (e.g., skipjack herring, Alosa chrysochloris), these species do not occur in high abundance below the dam and so do not drive variation in fish community structure. Instead, much of the variation in species structure is driven by the loss/gain of species across the latitudinal gradient. Lock and Dam 19 does not appear to be a clear transition point in the river's fish community, although it may function as a meaningful barrier for particular species (e.g., invasive species) and warrant future attention from a management perspective.     

Temperature and processing effects on lithium ion conductivity of solution-deposited lithium zirconium phosphate (LiZr2P3O12) thin films

Lithium zirconium phosphate (LiZr₂P₃O₁₂) thin films have been prepared on platinized silicon substrates via a chemical solution deposition approach with processing temperatures between 700°C and 775°C. Films that were subject to a single high-temperature anneal were found to crystallize at temperatures above 725°C. Crystallization was observed in films annealed after each deposited layer at 700°C and above. In both cases, grain size was found to increase with annealing temperature. Ion conductivity was found to increase with annealing temperature in singly annealed films. In per-layer annealed films ion conductivity was found to initially increase then decrease with increasing annealing temperature. A maximum ion conductivity of 1.6 × 10⁻⁶ S/cm was observed for the singly annealed 775°C condition, while a maximum ion conductivity of 5.8 × 10⁻⁷ S/cm was observed for the 725°C per-layer annealed condition. These results are consistent with an increasing influence of cross-plane, internal interface resistance and vapor phase carrier loss in the per-layer annealed samples. This work demonstrates that post-deposition processing methods can strongly affect the ion conducting properties of LiZr₂P₃O₁₂ thin films.     

Determination of Active Slip/Twinning Modes in AZ31 Mg Alloy Near Room Temperature

In order to determine the deformation modes in AZ31 magnesium alloy at room temperature, computer simulations of deformation texture development and calculation of formability have been carried out. The simulation results were compared with the measured texture results. Based on agreement between the experiments and simulations the active deformation modes were determined. A Visco Plastic Self Consistent model was employed for the simulation of plastic deformation. Simulations and experiments were performed for different initial textures. The goal of the study was to develop the understanding of deformation texture evolution and its effects on mechanical properties of magnesium, with an ultimate goal of improving room temperature formability of magnesium alloys. This article was presented at Materials Science & Technology 2006, Innovations in Metal Forming symposium held in Cincinnati, OH, October 15-19, 2006.     

Empathy and Modern Technology: A Neuroergonomics Perspective

The primary purpose of this paper is to discuss the role of empathy in the design of advanced systems in manufacturing and service industries in order to ensure suitable working conditions for employees from the social and technological point of view. The origins and components of empathy are briefly reviewed. The neural underpinnings of three components of empathy, including cognitive, emotional, and behavioral aspects, are considered in the context of human–human and human–machine interactions, as well as design of working environments. Finally, the potential advantages of applying empathy‐related knowledge to the design and development of human‐centered technology are discussed.     

Real-time lane tracking using Rao-Blackwellized particle filter

A novel approach to real-time lane modeling using a single camera is proposed. The proposed method is based on an efficient design and implementation of a particle filter which applies the concepts of the Rao-Blackwellized particle filter (RBPF) by separating the state into linear and non-linear parts. As a result the dimensionality of the problem is reduced, which allows the system to perform in real-time in embedded systems. The method is used to determine the position of the vehicle inside its own lane and the curvature of the road ahead to enhance the performance of advanced driver assistance systems. The effectiveness of the method has been demonstrated implementing a prototype and testing its performance empirically on road sequences with different illumination conditions (day and nightime), pavement types, traffic density, etc. Results show that our proposal is capable of accurately determining if the vehicle is approaching the lane markings (Lane Departure Warning), and the curvature of the road ahead, achieving processing times below 2 ms per frame for laptop CPUs, and 12 ms for embedded CPUs.