Optimization of evaporative fluid coolersOptimisation des refroidisseurs de liquide évaporatifs

In the paper the optimization of geometrical and operating parameters for evaporative fluid coolers has been presented. The algorithm of optimizational calculations contains:

• the mathematical model of heat and mass transfer in evaporative fluid coolers;

• model of operating costs based, among others, on the Zalewski–Gryglaszewski relations developed by the authors for evaluation of air pressure drops in the heat exchanger;

• model of evaporative heat exchangers production costs.

Optimization problem formulated for non-linear objective functions with inequality and equality constraints has been solved using Schittkowski's method based on quadratic programming. Two optimization problems have been considered. A solution to the first problem consists in the design of a heat exchanger with such geometrical parameters which ensure its maximum heat capacity at minimal total costs. A result to the second optimization problem are such thermal and flow parameters which will ensure minimum operating costs.The results of optimization calculations presented in the paper are accompanied by their experimental verification.     

The complexity of mean flow time scheduling problems with release times

We study the problem of preemptive scheduling of n} jobs with given release times on m identical parallel machines. The objective is to minimize the average flow time. In this paper, show that when all jobs have equal processing times then the problem can be solved in polynomial time using linear programming. Our algorithm can also be applied to the open-shop problem with release times and unit processing times. For the general case (when processing times are arbitrary), we show that the problem is unary NP-hard. P. Baptiste and C. Dürr: Supported by the NSF/CNRS grant 17171 and ANR/Alpage. P. Brucker: Supported by INTAS Project 00-217 and by DAAD PROCOPE Project D/0427360. M. Chrobak: Supported by NSF grants CCR-0208856 and INT-0340752. S. A. Kravchenko: Supported by the Alexander von Humboldt Foundation.     

Byzantine robust trust establishment for mobile ad hoc networks

In a mobile ad hoc network (MANET), the nodes act both as traffic sources and as relays that forward packets from other nodes along multi-hop routes to the destination. Such networks are suited to situations in which a wireless infrastructure is unavailable, infeasible, or prohibitively expensive. However, the lack of a secure, trusted infrastructure in such networks make secure and reliable packet delivery very challenging. A given node acting as a relay may exhibit Byzantine behavior with respect to packet forwarding, i.e., arbitrary, deviant behavior, which disrupts packet transmission in the network. For example, a Byzantine node may arbitrarily choose to drop or misroute a certain percentage of the packets that are passed to it for forwarding to the next hop. In earlier work, we proposed a trust establishment framework, called Hermes, which enables a given node to determine the “trustworthiness” of other nodes with respect to reliable packet delivery by combining first-hand trust information obtained independently of other nodes and second-hand trust information obtained via recommendations from other nodes. A deficiency of the Hermes scheme is that a node can fail to detect certain types of Byzantine behavior, such as packet misforwarding directed at a particular source node. In this paper, we propose new mechanisms to make Hermes robust to Byzantine behavior and introduce a punishment policy that discourages selfish node behavior. We present simulation results that demonstrate the effectiveness of the proposed scheme in a variety of scenarios involving Byzantine nodes that are malicious both with respect to packet forwarding and trust propagation.     

Prediction and Measurement of Electron Density and Collision Frequency in a Weakly Ionised Pine Fire

Pine litter flame is a weakly ionised medium. Electron-neutral collisions are a dominant form of particle interaction in the flame. Assuming flame electrons to be in thermal equilibrium with neutrals and average electron-neutral collision frequency to be much higher than the plasma frequency, the propagation of microwaves through the flame is predicted to suffer signal intensity loss. A controlled fire burner was constructed where various natural vegetation species could be used as fuel. The burner was equipped with thermocouples and used as a cavity for microwaves with a laboratory quality network analyzer to measure wave attenuation. Electron density and collision frequency were then calculated from the measured attenuation. The parameters are important for numerical prediction of electromagnetic wave propagation in wildfire environments. A controlled pine litter fire with a maximum flame temperature of 1080 K was set in the burner and microwaves (8–10.5 GHz) were caused to propagate through the flame. A microwave signal loss of 1.6–5.8 dB was measured within the frequency range. Based on the measured attenuation, electron density and electron-neutral collision frequency in pine fire were calculated to range from 0.51–1.35?×?10¹⁶ m^?3 and 3.43–5.97?×?10¹⁰ s^?1 respectively.     

Pressure distribution in an assembly of wooden cylinders with various aspect ratios under uniaxial confined compression

Understanding how forces propagate in granular assemblages is important for equipment design and process control in many technologies. Yet, it remains poorly understood. In this study, a cuboidal assembly comprising cylinders of various lengths (aspect ratios AR ranging from 0.9 to 3.6) were subjected to uniaxial confined compression tests. Samples were vertically compressed until the top platen exerted a pressure of 50 kPa on the uppermost particles. This maximum pressure corresponds to the hydrostatic pressure of an approximately 15 m high column of chopped wood that may be encountered in real storage structures. The nonlinear loading curves were obtained depended on the aspect ratios of the cylinders. The modulus of elasticity, calculated from the linear elastic part of the stress–strain curve, monotonically decreased from 10.2 to 8.6 MPa as the aspect ratio increased from 1.2 to 3.6. The elastic modulus and volume fraction exhibited similar trends as functions of the aspect ratio. The horizontal-to-vertical pressure ratio was calculated as the horizontal pressure exerted on the wider walls to the vertical pressure exerted on the top lid during loading–unloading cycles. For ARs up to 3.6, the pressure ratio was approximately 0.31; for the longest cylinders (AR = 3.6), it decreased to approximately 0.27, probably because the assumption of the representative chamber volume was invalidated at this AR.     

Distributed OSGi built over message‐oriented middleware

This paper describes key aspects of remote service invocation in federations of OSGi containers. It refers to the OSGi Remote Service Admin specification and describes its efficient implementation over message‐oriented middleware. Scalability problems of several different approaches to implementation are identified, and a solution in a form of innovative Remote Service Admin model extension is proposed. The extension, named On‐demand Remote Service Admin, is analyzed and validated in the context of a motivating scenario. Validation includes performance and scalability evaluation, which confirms that all assumed requirements have been satisfied by the constructed prototype. Finally, the presented research is compared with related works. Copyright © 2011 John Wiley & Sons, Ltd.     

The influence of loose and semianchored siloxane polymer chains on the tack of crosslinked silicone rubber

The influence of addition of nonreactive silicone oil or semianchored silicone polymer on crosslinked poly(dimethylsiloxane) (PDMS) rubber–rubber adhesion was studied. The additives can be considered either a tackifier, or connector molecules, able to cross the interface and entangle. In both cases, it influences the tack of the elastomers. An additional variable is the molecular weight of the additive, which affects the reptation of the polymer chains. Polymer–polymer demixing, which is the result of thermodynamic incompatibility of mixed polymers is another factor that influences tack. It causes the free chains to appear at the surface forming a layer of oil, which actually destroys the tack of the PDMS samples. The resulting tack phenomena as a function of oil, respectively semianchored silicone polymer chains, are very much dependent on the transient nature of the polymer reptation: in many cases the polymers need very long time periods to obtain equilibrium in interphase crossing, or oil sweats out of the crosslinked polymers, forming a liquid layer between the two phases resulting in a low tack value, due to hydrodynamic wetting alone. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009