Methods for determining pesticides and polychlorinated biphenyls in food samples--problems and challenges

Determination of residual amounts of pesticides and polychlorinated biphenyls (PCBs) in food samples requires the use of specific techniques regarding sample preparation as well as instrumental analysis which should be characterized by a very low detection limit. A problem associated with the use of pesticides and PCBs is the need for controlling their residues in the environment, particularly in food, as these chemicals show a propensity to accumulate. The analysis of food samples for the presence of pesticides and PCBs brings on many difficulties because of the specificity of sample preparation consisting of multistep purification procedures of samples that contain trace amounts of an analyte. Concentration determinations of pollutants that easily dissolve in complex matrices, particularly in the presence of a large apportionment of interfering substances, pose a big challenge. Therefore, the basic step in food analysis for the presence of pesticides and PCBs is sample preparation which mainly consists of analyte enrichment and the removal of interfering substances. But all steps of the analytical procedure that include sample collection and preparation, extraction of analytes from matrix, extract purification, and final determination, are very significant; their precision and correct application have a decisive effect on the final result.     

Determination of pesticide residues in food matrices using the QuEChERS methodology

The determination of pesticide residues in food matrices is a formidable challenge mainly because of the small quantities of analytes and large amounts of interfering substances which can be co-extracted with analytes and, in most cases, adversely affect the results of an analysis. However, safety concerns require that pesticides of the wide range of chemical properties (including acidic, basic and neutral) should be monitored. Because of the wide variety of food matrices, the sample must initially be cleaned up before final analysis. That is why the analytical chemist is faced with the need to devise new methodologies for determining such residues to be determined in a single analytical run. To accomplish the goal, QuEChERS methodology has been developed. It is a streamlined and effective extraction and cleanup approach for the analysis of diverse analyte residues in food matrices. So far, there have been achieved promising results by liquid or gas chromatography analysis, including pesticides, but also acrylamide, pharmaceuticals and veterinary drugs.     

Bio‐composites for structural applications: Poly‐l‐lactide reinforced with long sisal fiber bundles

Fully bio‐based and biodegradable composites were compression molded from unidirectionally aligned sisal fiber bundles and a polylactide polymer matrix (PLLA). Caustic soda treatment was employed to modify the strength of sisal fibers and to improve fiber to matrix adhesion. Mechanical properties of PLLA/sisal fiber composites improved with caustic soda treatment: the mean flexural strength and modulus increased from 279 MPa and 19.4 GPa respectively to 286 MPa and 22 GPa at a fiber volume fraction of V_f = 0.6. The glass transition temperature decreased with increasing fiber content in composites reinforced with untreated sisal fibers due to interfacial friction. The damping at the caustic soda‐treated fibers‐PLLA interface was reduced due to the presence of transcrystalline morphology at the fiber to matrix interface. It was demonstrated that high strength, high modulus sisal‐PLLA composites can be produced with effective stress transfer at well‐bonded fiber to matrix interfaces. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40999.     

Sequence of monolithic converters DOC–CDPF–NSRC for lean exhaust gas detoxification: A simulation study

With increasingly strict automotive emission regulations the exhaust gas aftertreatment becomes more complex and expensive. Mathematical modelling and simulations play an important role in design of the aftertreatment systems consisting of multiple catalytic devices, reducing the time and cost demands of the system design. In this paper a combined exhaust gas aftertreatment system for diesel engines is studied. It consists of a diesel oxidation catalyst (DOC) for CO and hydrocarbons oxidation, a catalyzed diesel particulate filter (CDPF) for soot filtration, and an NO_x storage and reduction catalyst (NSRC, also called lean NO_x trap, LNT) for NO_x abatement. Effective mathematical models of the individual converters are presented and used first to demonstrate the functionalities of the system, and then to conduct a parametric simulation study. The aim of this study is to map the influence of the individual components on the performance of the entire system in standard test driving cycle. The sizes of the DOC, CDPF, and NSRC converters are varied while the overall volume of the combined system is kept constant. The resulting maps of pressure drop, CO, HC, particulate matter, and NO_x conversions show non-linear dependences on the sizes of individual converters. Co-operative and competitive effects occurring in the combined system are discussed. Suitable reactors sizes are found that enable high conversions of all controlled exhaust gas components.     

Properties of Light MMCs Modified with Cordierite Synthesized from Fly Ash

This paper presents novel opportunities for management of fly ash by synthesizing the material into cordierite ceramics and using it as a reinforcing phase for light metal alloys. Metal matrix composites (based on magnesium alloy and aluminum alloy) were produced by squeeze casting. The magnesium matrix composites with a suitably selected reinforcing phase content (2 wt.%) exhibited much better strength properties than the unmodified alloy (AM60). It was also demonstrated that the wettability (or the lack thereof) in the metal-ceramic system is critical to successful production of the composites based on the AK7 alloy with cordierite. Light alloy matrix composites reinforced with cordierite ceramics particles are innovative materials that combine high strength with low weight, which may be a key factor of merit for numerous applications of the composite in various branches of industries.     

High resolution SEM characterization of nano‐precipitates in ODS steels

The performance of the present‐day scanning electron microscopy (SEM) extends far beyond delivering electronic images of the surface topography. Oxide dispersion strengthened (ODS) steel is on of the most promising materials for the future nuclear fusion reactor because of its good radiation resistance, and higher operation temperature up to 750°C. The microstructure of ODS should not exceed tens of nm, therefore there is a strong need in a fast and reliable technique for their characterization. In this work, the results of low‐kV SEM characterization of nanoprecipitates formed in the ODS matrix are presented. Application of highly sensitive photo‐diode BSE detector in SEM imaging allowed for the registration of single nm‐sized precipitates in the vicinity of the ODS alloys. The composition of the precipitates has been confirmed by TEM‐EDS.     

Integrated material flow and radioactivity distribution methodology within the calculation tool for evaluation of parameters for decommissioning of nuclear installations

Decommissioning of nuclear facilities becomes an important issue in all areas of nuclear technology, mainly in their energetic applications. Decommissioning process has to be planned in the safe, ecological and economic manner. It determines the requirements on appropriate evaluation of needed technologies, media, amount of solid materials released into the environment, radioactivity of effluents, amount of radioactive waste for disposal, number and exposure of personnel and finally the financial demands. A detailed evaluation of these parameters may be done by analytical calculation approach. This approach models a real process of decommissioning with its individual basic activities. The methodology of integrated material flow and radioactivity distribution within this calculation evaluation tool is applied and implemented to describe the real decommissioning activities and their mutual relations to obtain more accurate outputs.     

Long-Term Changes in Ovarian Follicles of Gilts Exposed Neonatally to Methoxychlor: Effects on Oocyte-Derived Factors,Anti-Müllerian Hormone,Follicle-Stimulating Hormone,and Cognate Receptors

In this paper, we investigated the effects of neonatal exposure to methoxychlor (MXC), a synthetic organochlorine used as an insecticide with estrogenic, antiestrogenic, and antiandrogenic activities on ovarian follicles of adult pigs. Piglets were injected with MXC (20 μg/kg body weight) or corn oil (controls) from postnatal Day 1 to Day 10 (n = 5 per group). Then, mRNA expression, protein abundance and immunolocalization of growth and differentiation factor 9 (GDF9), bone morphogenetic protein 15 (BMP15), anti-Müllerian hormone (AMH) and cognate receptors (ACVR1, BMPR1A, BMPR1B, TGFBR1, BMPR2, and AMHR2), as well as FSH receptor (FSHR) were examined in preantral and small antral ovarian follicles of sexually mature gilts. The plasma AMH and FSH levels were also assessed. In preantral follicles, neonatal exposure to MXC increased GDF9, BMPR1B, TGFBR1, and BMPR2 mRNAs, while the levels of AMH and BMP15 mRNAs decreased. In addition, MXC also decreased BMP15 and BMPR1B protein abundance. Regarding small antral follicles, neonatal exposure to MXC upregulated mRNAs for BMPR1B, BMPR2, and AMHR2 and downregulated mRNAs for AMH, BMPR1A, and FSHR. MXC decreased the protein abundance of AMH, and all examined receptors in small antral follicles. GDF9 and BMP15 were immunolocalized in oocytes and granulosa cells of preantral follicles of control and treated ovaries. All analyzed receptors were detected in the oocytes and granulosa cells of preantral follicles, and in the granulosa and theca cells of small antral follicles. The exception, however, was FSHR, which was detected only in the granulosa cells of small antral follicles. In addition, MXC decreased the plasma AMH and FSH concentrations. In conclusion, the present study may indicate long-term effects of neonatal MXC exposure on GDF9, BMP15, AMH, and FSH signaling in ovaries of adult pigs. However, the MXC effects varied at different stages of follicular development. It seems that neonatal MXC exposure may result in accelerated initial recruitment of ovarian follicles and impaired cyclic recruitment of antral follicles.     

Evaluation of the mechanical behavior of W7-X central support connections by means of semi-automated FE analysis

The stellarator Wendelstein 7-X is under construction at the Max-Planck-Institut für Plasmaphysik in Greifswald. Its superconducting coil system is fixed by a massive structure. During machine operation the coils exert high forces and moments against each other and the central support structure (CSS). Therefore, the detailed analysis of the coil to CSS connections, the so-called central support elements (CSE), is a critical item. The major details of the design have been frozen; nevertheless, there is still need for detailed analysis of the CSEs due to assembly issues, and later on for exploring operational limits of the machine. These analyses have to be performed quickly, reliably, and shall provide results in a standardized form to enable timely responses to the assembly team. Special numerical tools – finite element (FE) parametric models of CSEs – have been developed for the purpose of such analyses. In the models, the geometry, material properties, contact conditions, loads as well as results presentation are defined in a parametric way. The use of the developed models for the definition of the final weld parameters, bolt preloads, assessment of acceptable tolerances, and optimal positions of the CSE-wedges before welding is also discussed.