Semiconducting polyurethane/polypyrrole/polyaniline for microorganism immobilization and wastewater treatment in anaerobic/aerobic sequential packed bed reactors

The development of new materials for microorganism immobilization is very important in wastewater treatment. In this work polyurethane (PU) foams were modified polymerizing pyrrole and aniline onto their surface by chemical oxidization to obtain polyurethane/polypyrrole (PU/PPy), polyurethane/polyaniline (PU/PANI), and PU/(PPy‐co‐PANI) supports which were used to immobilize microorganisms for municipal wastewater treatment in batch mode and continuous flow using two sequential (anaerobic/aerobic) packed bed reactors (PBR) varying the total hydraulic retention time (HRT). The supports were characterized by Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) and tested in chemical oxygen demand (COD) removal during treatment of a municipal wastewater. It was observed from SEM analysis that globular nanostructures of PPy and PPy‐co‐PANI were formed onto the PU surface with average diameters between 100 and 300 nm, which are typical of aqueous polymerization of pyrrole monomer; however irregular nanostructures were observed when PANI was homopolymerized onto the PU foam. Batch wastewater treatment after 14 days showed COD removal efficiencies of 77%, 69%, 78%, and 80% for PU foam, PU/PPy, PU/PANI, and PU/(PPy‐co‐PANI), respectively; which was explained as a function of polymers morphology deposited onto the PU foam surface. Also it was observed from the sequential PBR that for 24 h and 36 h of HRT, 80 and 90% of COD removal can be achieved; respectively.© 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42242.     

Preparation and swelling properties of homopolymeric alginic acid fractions/poly(N‐isopropyl acrylamide) graft copolymers

Graft copolymers of crosslinked poly(N‐isopropyl acrylamide) (PNIPAAm) and homopolyguluronic acid (GG) and homopolymannuronic acid (MM) fractions of alginic acid were synthesized. MM and GG block fractions were obtained by partial acid hydrolysis of the alkaline extract from the brown seaweed Macrocystis pyrifera. The conjugation of these block fractions with the synthetic polymer was achieved by amidation with crosslinked PNIPAAm functionalized with an amino group at the end of the polymer chain. The structure of conjugates was determined by Fourier transform infrared and NMR spectroscopy. Atomic force microscopy of the graft copolymer GG‐g‐PNIPAAm showed a regular porous pattern, whereas the MM‐g‐PNIPAAm graft copolymer showed a regular netlike structure. Aqueous solutions of the synthesized graft copolymers afforded hydrogels by stirring with 0.1M CaCl₂. The hydrogels showed a well‐defined stimulus–response to temperature and pH. The swelling, thermal, and pH characterizations demonstrated the superior properties of the GG‐g‐PNIPAAm hydrogel over the MM‐g‐PNIPAAm hydrogel. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42398.     

Laser‐induced surface structures on gold‐coated polymers: Influence of morphology on surface‐enhanced Raman scattering enhancement

The fabrication of highly sensitive and reproducible substrates for Surface‐Enhanced Raman Scattering (SERS) remains a challenging scientific and technological issue. In this work, laser‐induced periodic surface structures are generated on poly(trimethylen terephthalate) films upon laser irradiation with the linearly polarized beams of a Nd:YAG laser (4th harmonic, 266 nm), an ArF excimer laser (193 nm), and a Titanium:sapphire laser (795 nm), resulting in periods close to the laser wavelength when irradiating at normal incidence, and larger periods for different angles of incidence. Additional irradiation with a circularly polarized beam at 266 nm produces superficial circular structures. The nanostructured polymers are coated with a nanoparticle assembled gold layer by pulsed laser deposition at 213 nm. The capabilities of these substrates for SERS are evaluated using benzenethiol as a test molecule and different degrees of Raman signal enhancement are observed depending on the nanostructure type. The highest enhancement factor is obtained by for nanostructured substrates with the highest values of period, depth, and roughness. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42770.     

Controllability Analysis of Process Alternatives for Biobutanol Purification

Biobutanol has characteristics similar to petroleum fuel and is considered as a superior biofuel compared to ethanol. The development of technologies for biobutanol production by fermentation has resulted in higher final biobutanol concentrations together with less energy‐intensive separation and purification techniques. These new technological developments have the potential to provide a production process for biobutanol that is economically viable in comparison to the petrochemical pathway for its production. The control properties of four different possible process designs for biobutanol purification are analyzed. The results, using the singular value decomposition technique, indicated that the scheme where only biobutanol flow is purified, and both ethanol and acetone leaving the purification process mixed with water and biobutanol traces, showed the best control properties.     

Structural Determinants of the Selectivity of 3‐Benzyluracil‐1‐acetic Acids toward Human Enzymes Aldose Reductase and AKR1B10

The human enzymes aldose reductase (AR) and AKR1B10 have been thoroughly explored in terms of their roles in diabetes, inflammatory disorders, and cancer. In this study we identified two new lead compounds, 2‐(3‐(4‐chloro‐3‐nitrobenzyl)‐2,4‐dioxo‐3,4‐dihydropyrimidin‐1(2H)‐yl)acetic acid (JF0048, 3 ) and 2‐(2,4‐dioxo‐3‐(2,3,4,5‐tetrabromo‐6‐methoxybenzyl)‐3,4‐dihydropyrimidin‐1(2H)‐yl)acetic acid (JF0049, 4 ), which selectively target these enzymes. Although 3 and 4 share the 3‐benzyluracil‐1‐acetic acid scaffold, they have different substituents in their aryl moieties. Inhibition studies along with thermodynamic and structural characterizations of both enzymes revealed that the chloronitrobenzyl moiety of compound 3 can open the AR specificity pocket but not that of the AKR1B10 cognate. In contrast, the larger atoms at the ortho and/or meta positions of compound 4 prevent the AR specificity pocket from opening due to steric hindrance and provide a tighter fit to the AKR1B10 inhibitor binding pocket, probably enhanced by the displacement of a disordered water molecule trapped in a hydrophobic subpocket, creating an enthalpic signature. Furthermore, this selectivity also occurs in the cell, which enables the development of a more efficient drug design strategy: compound 3 prevents sorbitol accumulation in human retinal ARPE‐19 cells, whereas 4 stops proliferation in human lung cancer NCI‐H460 cells.     

New Biofuel Alternatives: Integrating Waste Management and Single Cell Oil Production

Concerns about greenhouse gas emissions have increased research efforts into alternatives in bio-based processes. With regard to transport fuel, bioethanol and biodiesel are still the main biofuels used. It is expected that future production of these biofuels will be based on processes using either non-food competing biomasses, or characterised by low CO₂ emissions. Many microorganisms, such as microalgae, yeast, bacteria and fungi, have the ability to accumulate oils under special culture conditions. Microbial oils might become one of the potential feed-stocks for biodiesel production in the near future. The use of these oils is currently under extensive research in order to reduce production costs associated with the fermentation process, which is a crucial factor to increase economic feasibility. An important way to reduce processing costs is the use of wastes as carbon sources. The aim of the present review is to describe the main aspects related to the use of different oleaginous microorganisms for lipid production and their performance when using bio-wastes. The possibilities for combining hydrogen (H₂) and lipid production are also explored in an attempt for improving the economic feasibility of the process.     

Synergistic Effect in Selective Reduction of NO by Alkanes over Mechanically Mixed Oxide Catalysts

The process of selective catalytic reduction of nitrogen oxides by propane in the presence of O₂, as well as in the presence or absence of CO, was studied over series of commercial oxide catalysts used in petrochemical processes. For the first time synergistic effect was observed for catalytic systems consisting of mechanical mixtures of Cu–Zn–Ni–Al (catalyst I) + Fe–Cr (catalyst II) and Cu–Zn–Ni–Al (catalyst I) + Ni–Cr (catalyst III). The activity of these mixtures in nitrogen oxides reduction by propane was greater than that of individual components in each case. The worked-out catalytical systems showed high effectivity in the process of simultaneous removal of several toxic components: NO _x , CO, hydrocarbons – from model gas mixtures, as well as from real exhausts of automotive transport.     

Novel fatty acid esters of (7E, 12E, 18R, 20Z)-variabilin from the marine sponge Ircinia felix

The methanolic extract of the marine sponge Ircinia felix has yielded nine novel fatty acid esters, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-22-methyltricosadienoate, (7E, 12E, 18R, 20Z)-variabilin (5Z, 9Z)-tetracosadienoate, (7E, 12E, 18R, 20Z)-variabilin hexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 10-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 15-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 14-methylhexadecanoate, (7E, 12E, 18R, 20Z)-variabilin 9-octadecenoate, (7E, 12E, 18R, 20Z)-variabilin octadecanoate, and (7E, 12E, 18R, 20Z)-variabilin 2,11-dimethyloctadecanoate, along with the recently described (7E, 12E, 18R, 20Z)-variabilin 11-methyloctadecanoate. The characterization of the new fatty acids (5Z, 9Z)-22-methyltricosadienoic and 2,11-dimethyloctadecanoic acids is also described. The chemical structures were determined by extensive spectroscopic, chromatographic, and chemical analyses.