Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

Stability during storage of LC-PUFA-supplemented infant formula containing single cell oil or egg yolk

The medical community recommends that infant formulae should mimic human milk as far as possible, particularly in regards to long-chain polyunsaturated fatty acids (LC-PUFA). These include arachidonic acid (AA) and docosahexaenoic acid (DHA), both of which provide biochemical and functional benefits to neonates. However, LC-PUFAs are highly susceptible to oxidation and the composition of formulae must be carefully controlled. In this study, the stability of two types of LC-PUFA-supplemented milk-based powdered infant formula was evaluated over the course of 18 months storage at 25 °C and 40 °C. One contained egg yolk phospholipids (IF-EPL) and the other contained triacylglycerides (DHA and AA) synthesized by single cell oils (IF-SCO). The following parameters were monitored: peroxide values, volatile content (propanal, pentanal and hexanal), fatty acid profiles, and potential and free furfural content (5-hydroxymethyl-2-furaldehyde and 2-furaldehyde). In addition, these formulae were subjected to sensory evaluations by a panel of experts. The parameters studied revealed acceptable lipid stability in both types of formula, with better results for IF-EPL. At the end of the study period, significant deficits (p < 0.05) in linoleic acid were noted in both formulae. However, no significant decreases were observed in the other fatty acids, including AA and DHA. In regards to furfural content, both formulae exhibited a similar increase, indicative of the typical Maillard reaction characteristic of products stored for long periods.     

Climate change benefits and energy supply benefits as determinants of acceptance of nuclear power stations: Investigating an explanatory model

Several countries are currently discussing whether they will rebuild their nuclear power stations in order to continue this type of energy production in the future. The public, with its own opinion about nuclear power stations, has an influential voice in this discussion. As a result, policy makers and nuclear scientists are interested in the public's perception of nuclear power and in what determines this perception. We therefore examined an explanatory model of the public's acceptance of nuclear power based on a telephone survey among a representative sample in Switzerland. The model included such factors as risk perception, benefit perception, affective feelings, and social trust. Moreover, we distinguished between two types of benefit perception: benefit for the climate and a secure energy supply. The model fitted very well to our data and explained acceptance very well. Acceptance was mainly influenced by perceived benefits for a secure energy supply and, to a lesser extent, both by perceived benefits for the climate and by risk perception. Affective feelings about nuclear power appeared to be a central factor in the model. Implications for communication about nuclear power stations and for further research are discussed.     

Metallopolymers based on a polyazomethine ligand containing rigid oxadiazole and flexible tetramethyldisiloxane units

Soluble, easily processable polymer–metal complexes with improved optical and dielectric properties for optoelectronic functional materials were obtained. For this, a new polyazomethine (PAZ2) was prepared by the reaction of a siloxane dialdehyde and bis(formyl‐p‐phenoxymethyl) tetramethyldisiloxane with 2,5‐bis(p‐aminophenyl)‐1,3,4‐oxadiazole, and it was used as a ligand for Cu(II), Co(II), and Zn(II) ions on the basis of the presence of the electron‐donor nitrogen atoms from the azomethine group and oxadiazole ring. The structure of the PAZ2 was determined by spectral [Fourier transform infrared (FTIR) and ¹H‐NMR spectroscopy] techniques. The metal complexation was proven by FTIR spectroscopy, and the silicon‐to‐metal ratios in the complexes were established by energy‐dispersive X‐ray fluorescence. The new materials were characterized by gel permeation chromatography, thermogravimetric analysis, and differential scanning calorimetry. The optical properties of PAZ2 and the derived metal complexes were studied by ultraviolet–visible and fluorescence spectroscopies. PAZ2 shows fluorescence emission, and it was significantly enhanced by metal complexation. The emission was enhanced by protonation; this behavior is useful, especially for sensors. The electrical properties were investigated by dielectric spectroscopy at various frequencies and temperatures, and this emphasized the existence of dipolar relaxations. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41631.     

Modifying biodegradable plastics with additives based on condensed tannin esters

Condensed tannins derived from Pinus radiata bark have been esterified and added to biodegradable plastics as extrusion compounded functional plastic additives. The presence of longer alkyl chain hexanoate esters promoted tannin miscibility in the commercial polyesters Bionolle? and Biopol? whereas short chain acetate esters tended to remain as discrete domains, acting as fillers in the processed plastics. In the aliphatic polyester Bionolle the presence of tannin esters at typical plastic additive loadings did not alter plastic mechanical properties whereas at 5% content in Biopol the tannin‐additives reduced both flexural and tensile properties. Similarly tannin esters do not alter the melt or glass transition temperatures of the polyesters, but tannin hexanoate at 5% can influence the crystallization temperatures. Artificially aging plastics realized the functionality these plant extracts can impart to plastics in acting to reduce ultraviolet (UV)‐induced plastic degradation. Results indicate the tannin‐additives likely provide a stabilising role through inhibiting UV penetration into the plastic, with color analysis suggesting the tannin moiety itself was sacrificial and preferentially degrading. The imparted UV stability was linked to the dissolution of tannin esters in the plastic with longer chain esters providing greater protection against UV degradation. Tannin esters showed potential as functional additives for biodegradable polymers enhancing the UV stability of the plastic. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41626.     

Optimal design of stepped spillways using the HBMO algorithm

Studies on stepped spillways as flood energy dissipators have been conducted to understand the hydraulics on the stepped face of roller-compacted concrete dams as well as overlays of embankment dams. Significant energy losses occur along the stepped chute so that the energy dissipation structure becomes smaller and more economic. In addition, considering the design discharge, downstream face slope, height of spillway, different combinations of spillway width and number of spillway steps may lead to different head losses. In each feasible combination, the remaining head after the steps should be dissipated by downstream energy dissipators. Design and construction of spillways and energy disspators are very cost-consuming and build up a major part of the dam's construction expenses. Thus, the cost of a financially viable stepped spillway project that consists of the steps’ cost and downstream dissipator's cost should be minimised. In this paper, the honey-bee mating optimisation (HBMO) algorithm is used to determine the best combination of design variables so as to minimise the total cost of both spillway chute and stilling basin. Results are compared with those previously obtained by genetic algorithm (GA) and show the promising potential of the HBMO algorithm in this field of application.     

Effect of CO2 Exposure on the Chemical Stability and Mechanical Properties of BaZrO3‐Ceramics

The reactivity of BaZrO₃ with CO₂ has been addressed as one of the major challenges with BaZrO₃‐based electrolytes in protonic ceramic fuel cells. Here, we present a study of the effect of CO₂ exposure on BaZrO₃‐materials at elevated temperatures. Dense BaZr_1?xY_xO_3?x/2 (x = 0, 0.05, 0.1, 0.2) and BaCe_0.2Zr_0.7Y_0.1O_2.95 ceramics were prepared by sintering of powder prepared by spray pyrolysis. The Vickers indentation method was used to determine the hardness and estimate the fracture toughness of pristine materials as well as the corresponding materials exposed to CO₂. Formation of BaCO₃ on the surface of exposed ceramics was confirmed by X‐ray diffraction and electron microcopy. The reaction resulted in formation of Ba‐deficient perovskite at the exposed surface. The reaction with CO₂ was most pronounced at 650°C compared to the other temperatures applied in the study. The reactivity was also shown to depend on the Y‐content and the grain size and was most pronounced for BaZr_0.9Y_0.1O_2.95. The reaction with CO₂ was observed to have a profound effect on the fracture toughness of the ceramics, demonstrating a depression of the mechanical stability of the materials. The results are discussed with respect to the chemical and mechanical stability of BaZrO₃ materials, with particular emphasis on the composition and grain size.