Influence of Chemical Reactions in Magnesia-Graphite Refractories: I, Effects on Texture and High-Temperature Mechanical Properties

Four formulations of magnesia-graphite-aluminum metal (antioxidant) bricks were prepared from the same raw materials, using the standard commercial practices. Chemical analysis and determination of room-temperature modulus of rupture and Young's modulus, as well as a complete microstructural characterization of the as-received materials, were performed. For high-temperature modulus-of-rupture and Young's modulus data, test samples of the four brick compositions were heated to 1000°, 1200°, and 1450°C in flowing argon (<1000 ppm oxygen at 1000°C) and then loaded mechanically in flexure. Modulus-of-elasticity values ranged from 3.7 to 16.2 GPa and reflected strong effects of aluminum-metal concentration and treatment temperature. Young's modulus evolution with temperature was determined by the evolution of the microstructure in the bulk of the specimens. Modulus-of-rupture values ranged from 6 to 21 MPa, and their evolution with temperature was determined by the evolution of the microstructure in the bulk of the specimens at the lower testing temperatures ( T lessthan equal to 1200°C) and by phase assemblages in the surface regions of the specimens-essentially by the presence of the dense MgO zone-at 1450°C.     

Curing behavior and properties of epoxy resins cured with the diamine having the quinoxaline or triazine structure

2,3-Bis(4-aminophenyl)quinoxaline (1a), 2,3-bis(4-aminophenyl)-6-methylquinoxaline (1b), and 5,6-bis(4-aminophenyl)-3-(2-pyridyl)-1,2,4-triazine (2) were studied as curing agents of epoxy resins. The exotherms on differential scanning calorimetry thermograms of the mixtures of diglycidyl ether of bisphenol A (DGEBA) with 1a, 1b, and 2 were observed at higher temperatures than that of the mixture of DGEBA with a commercially used diamine, for example, 4,4′-diaminodiphenylsulfone (DDS). However, the epoxy resin cured with 1a (EP-1a) showed higher tensile strength to stainless steel at 20°C than that cured with DDS, and the high tensile strength of EP-1a was maintained even at 180°C. The epoxy resin cured with 1b or 2 also possessed higher tensile strength at 20°C than that cured with DDS, but the high tensile strength lowered somewhat at 120°C. Using diamines 1a, 1b, and 2 as a curing agent improved heat distortion temperatures of the cured epoxy resins. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 69: 1737–1741, 1998     

In vitro protein digestibility and mineral availability of green beans (Phaseolus vulgarisL) as influenced by variety and pod size

Three varieties of green beans (Cleo, Strike and Sentry) were harvested and sorted into four fractions according to pod size (diameter <7 mm; 7–8·5 mm; 8·6–10 mm and >10 mm). Ash content and dietary fibre increased significantly as pod size increased mainly in Cleo and Strike beans. Strike showed the highest fibre content (378·0 g kg⁻¹) but the lowest carbohydrate (364·6 g kg⁻¹) and ash (68·4 g kg⁻¹) values. Mean values for Fe and Mg content were higher in Cleo beans (70·9 and 27·1 mg kg⁻¹, respectively), Zn, Cu and Mg were higher in Strike beans (48·7 mg kg⁻¹, 22·4 mg kg⁻¹ and 3·15 g kg⁻¹, respectively) while Na and Ca values were maximum in Sentry (459·1 mg kg⁻¹ and 7·11 g kg⁻¹, respectively). Trypsin inhibitor was negatively related to in vitro protein digestibility but no relationship was found between this last parameter and phytic acid content. This antinutrient, together with dietary fibre, and a negative influence on in vitro mineral dialysability of green beans. © 1998 SCI     

Correction to: Consumption of non-nutritive sweeteners by pre-schoolers of the food and environment Chilean cohort (FECHIC) before the implementation of the Chilean food labelling and advertising law

Nutritional treatment is one of the most important components of multidisciplinary anti-cancer therapy. Home enteral nutrition is considered as a safe procedure, however, it may be associated with the risk of side effects, such as nausea, vomiting, abdominal pain, and diarrhoea. It is uncertain whether diarrhoea is the result of the enteral formula administration or gut dysbiosis. One of the methods which may be used to alter the composition of gut microbiota is the administration of a probiotic strain. Lactobacillus plantarum 299v ingestion was found to diminish the adverse events of irritable bowel syndrome and Clostridium difficile infection - entities that share the symptoms with enteral nutrition side effects. Therefore, the primary aim of this study is to determine the effect of Lactobacillus plantarum 299v on prevention of weight loss of cancer patients receiving home enteral nutrition. The secondary aims are to evaluate the role of this probiotic strain in the improvement of nutritional status, enteral nutrition tolerance, and patients’ quality of life. Forty patients with cancer receiving home enteral nutrition will be enrolled in this clinical trial and randomized to receive one capsule of Lactobacillus plantarum 299v (Sanprobi IBS®) twice a day or placebo for 12 weeks in a double-blind manner. Laboratory tests (the level of albumin, total protein, transferrin, and total lymphocyte count), anthropometric parameters (body mass, the content of fat mass, muscle mass, and total body water), Nutritional Risk Screening (NRS 2002), enteral nutrition tolerance as well as quality of life will be measured. Measurements will be obtained at the baseline and after 4 and 12 weeks of treatment. The adverse events observed during administration of enteral nutrition have an negative impact on enteral formula tolerance and as a consequence patients’ quality of life. The previous studies have demonstrated that probiotics may reduce the gastrointestinal symptoms related to enteral nutrition. Thus, administration of Lactobacillus plantarum 299v may be effective in improvement of nutritional status, enteral nutrition tolerance, and quality of life of cancer patients receiving home enteral nutrition. ClinicalTrials.gov Identifier: NCT03940768 .     

Epidemicity of cholera spread and the fate of infection control measures

The fate of ongoing infectious disease outbreaks is predicted through reproduction numbers, defining the long-term establishment of the infection, and epidemicity indices, tackling the reactivity of the infectious pool to new contagions. Prognostic metrics of unfolding outbreaks are of particular importance when designing adaptive emergency interventions facing real-time assimilation of epidemiological evidence. Our aim here is twofold. First, we propose a novel form of the epidemicity index for the characterization of cholera epidemics in spatial models of disease spread. Second, we examine in hindsight the survey of infections, treatments and containment measures carried out for the now extinct 2010–2019 Haiti cholera outbreak, to suggest that magnitude and timing of non-pharmaceutical and vaccination interventions imply epidemiological responses recapped by the evolution of epidemicity indices. Achieving negative epidemicity greatly accelerates fading of infections and thus proves a worthwhile target of containment measures. We also show that, in our model, effective reproduction numbers and epidemicity indices are explicitly related. Therefore, providing an upper bound to the effective reproduction number (significantly lower than the unit threshold) warrants negative epidemicity and, in turn, a rapidly fading outbreak preventing coalescence of sparse local sub-threshold flare-ups.     

Identification of Kukoamine A,Zeaxanthin, and Clexane as New Furin Inhibitors

The endogenous protease furin is a key protein in many different diseases, such as cancer and infections. For this reason, a wide range of studies has focused on targeting furin from a therapeutic point of view. Our main objective consisted of identifying new compounds that could enlarge the furin inhibitor arsenal; secondarily, we assayed their adjuvant effect in combination with a known furin inhibitor, CMK, which avoids the SARS-CoV-2 S protein cleavage by means of that inhibition. Virtual screening was carried out to identify potential furin inhibitors. The inhibition of physiological and purified recombinant furin by screening selected compounds, Clexane, and these drugs in combination with CMK was assayed in fluorogenic tests by using a specific furin substrate. The effects of the selected inhibitors from virtual screening on cell viability (293T HEK cell line) were assayed by means of flow cytometry. Through virtual screening, Zeaxanthin and Kukoamine A were selected as the main potential furin inhibitors. In fluorogenic assays, these two compounds and Clexane inhibited both physiological and recombinant furin in a dose-dependent way. In addition, these compounds increased physiological furin inhibition by CMK, showing an adjuvant effect. In conclusion, we identified Kukoamine A, Zeaxanthin, and Clexane as new furin inhibitors. In addition, these drugs were able to increase furin inhibition by CMK, so they could also increase its efficiency when avoiding S protein proteolysis, which is essential for SARS-CoV-2 cell infection.     

Untersuchungen zur Sensibilisierung von Azofarbstoff-Perhalogenid-Systemen

Investigations Concerning Sensitization of Silver Free Information Recording Materials with Azo Dyes and Polyhalogen Compounds Recording materials mentioned in the title are sensitive to the visible region of light. The reason therefore is an energy transfer from the azo dye to the polyhalogen compounds, preferentially CBr₄. It's possible to separate the absorption spectra of azo compounds used in this work into two gaussian functions, which relates to n,π*- and π,π*-transitions. Only the excitation of the n,π*-transition causes sensitization. A mechanisms of sensitization is proposed.     

Improved Production of 5-Hydroxymethylfurfural in Acidic Deep Eutectic Solvents Using Microwave-Assisted Reactions

Hydroxymethylfurfural (5-HMF) is a key platform chemical, essential for the production of other chemicals, as well as fuels. Despite its importance, the production methods applied so far still lack in sustainability. In this work, acidic deep eutectic solvents (DES), acting both as solvent and catalyst, were studied for the conversion of fructose into 5-HMF using microwave-assisted reactions. These solvents were screened and optimized by varying the hydrogen bond donor (HBD) and hydrogen bond acceptor (HBA). The bio-based solvent γ-valerolactone (GVL) was also applied as additive, leading to a boost in 5-HMF yield. Then, a response surface methodology was applied to further optimize operating conditions, such as reaction time, temperature and wt.% of added GVL. The highest 5-HMF yield attained, after optimization, was 82.4% at 130 °C, in 4 min of reaction time and with the addition of 10 wt.% of GVL. Moreover, a process for 5-HMF recovery and DES reuse was developed through the use of the bio-based solvent 2-methyltetrahydrofuran (2-Me-THF), allowing at least three cycles of 5-HMF production with minimal yield losses, while maintaining the purity of the isolated 5-HMF and the efficacy of the reaction media.     

Catalytic wet peroxide oxidation of phenol over Fe-exchanged pillared beidellite

This study presents an evaluation of the catalytic performances of a Fe-exchanged Al-pillared synthetic beidellite for the wet hydrogen peroxide oxidation of phenolic aqueous wastes. The catalyst was prepared by a cation doping technique, its properties being determined by DRX, BET and chemical analysis techniques. All the tests were performed on a laboratory scale set-up.Important factors affecting catalyst activity and phenol removal efficiencies were studied, i.e. the effect of pH, temperature, catalyst concentration and the stability of the catalyst. The experimental results indicate that the use of this catalyst allows a total elimination of phenol and a significant removal of chemical oxygen demand, without significant leaching of Fe ions. Thus, considering the lowest Fe concentrations in solution after oxidation, at pH=5, 50 degrees C, and 180 min. COD removal efficiency of 87.9% was obtained. It was also observed that by using this catalyst, it is possible to extend the range of pH values for which Fenton-type oxidations can occur.     

Characterization and thermal degradation of poly(d,l‐lactide‐co‐glycolide) composites with nanofillers

Chemical and thermal characterization of poly(d ,l ‐lactide‐co‐glycolide) (PLGA) composites filled with hydroxyapatite (HA) or carbon nanotubes (CNT) were evaluated by infrared spectroscopy, differential scanning calorimetry, thermogravimetry, and dynamic–mechanical–thermal analysis. The morphology and distribution of the nanoparticles were studied by transmission electron microscopy. The composites were prepared by solvent casting using 30% HA or 1, 3, and 5% of pristine and functionalized CNT as nanoparticles and PLGA 75:25 and PLGA 50:50 as copolymer matrix. The Coats–Redfern and E₂ function methodologies were used to calculate the reaction order and the activation energy (E_a) of the thermal degradation process. It was found that the addition of nanoparticles increased the glass transition temperature (T_g) of the composites. Also, higher degradation temperatures and E_a values were obtained for PLGA–HA composites and compared with the neat copolymer, and the opposite behavior was exhibited by PLGA–CNT composites. The thermal and mechanical properties were highly dependent on the morphology and dispersion of the filler. The functionalization process of CNT promoted, to some extent, a better distribution and dispersion of CNT into the matrix, and these composites exhibited a slight enhancement on storage modulus. On the other hand, PLGA–HA composites showed a good dispersion but no improvement on the storage modulus below T_g. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers