Aerosol Particle Collection Efficiency of Holey Carbon Film-Coated TEM Grids

A simple sampling method to collect aerosol particles for transmission electron microscope (TEM) analysis was developed by R’mili and others in 2013. The method involves passing air through a holey carbon film-coated copper mesh TEM grid (holey carbon grid) and sampling particles by filtration. In this study, we proposed a modified calculation method to represent the collection efficiencies of holey carbon grids, taking into consideration the porosity of the copper mesh. We then evaluated the particle collection efficiencies of holey carbon grids both theoretically and experimentally. We tested the collection efficiency of two types of holey carbon grids, with nominal pore sizes of 1.2 and 0.6 μm, using particles of monodispersed polystyrene latex (PSL) and potassium chloride. The overall collection efficiency of each grid (E_grid) was determined by the downstream/upstream concentration ratio measured by condensation particle counters (CPCs). In addition, for PSL particles, the collection efficiency of the holey carbon film (E_film) was determined by the ratio of the number of particles on the film (counted on a scanning electron microscope) to the number of inflow particles (counted by a CPC). We compared model calculations against the experimental results obtained in this study and those reported by R’mili and others in 2013. These data showed that the calculated E_grid values were in reasonably good agreement with the experimental E_grid values. However, although the model calculation indicated that E_film ≈ E_grid, there was an inconsistency between the experimental E_film and E_grid, which requires further investigation in order to determine its cause.

Copyright 2014 American Association for Aerosol Research     

The Expression of Active CD11b Monocytes in Blood and Disease Progression in Amyotrophic Lateral Sclerosis

Monocytes expressing the inflammation suppressing active CD11b, a beta2 integrin, may regulate neuroinflammation and modify clinical outcomes in amyotrophic lateral sclerosis (ALS). In this single site, retrospective study, peripheral blood mononuclear cells from 38 individuals living with ALS and 20 non-neurological controls (NNC) were investigated using flow cytometry to study active CD11b integrin classical (CM), intermediate (IM) and non-classical (NCM) monocytes during ALS progression. Seventeen ALS participants were sampled at the baseline (V1) and at two additional time points (V2 and V3) for longitudinal analysis. Active CD11b+ CM frequencies increased steeply between the baseline and V3 (ANOVA repeated measurement, p < 0.001), and the V2/V1 ratio negatively correlated with the disease progression rate, similar to higher frequencies of active CD11b+ NCM at the baseline (R = −0.6567; p = 0.0031 and R = 0.3862; p = 0.0168, respectively). CD11b NCM, clinical covariates and neurofilament light-chain plasma concentration at the baseline predicted shorter survival in a multivariable and univariate analysis (CD11b NCM—HR: 1.05, CI: 1.01–1.11, p = 0.013. Log rank: above median: 43 months and below median: 21.22 months; p = 0.0022). Blood samples with the highest frequencies of active CD11b+ IM and NCM contained the lowest concentrations of soluble CD11b. Our preliminary data suggest that the levels of active CD11b+ monocytes and NCM in the blood predict different clinical outcomes in ALS.     

Physiology and Pathophysiology of Heparan Sulfate in Animal Models: Its Biosynthesis and Degradation

Heparan sulfate (HS) is a type of glycosaminoglycan that plays a key role in a variety of biological functions in neurology, skeletal development, immunology, and tumor metastasis. Biosynthesis of HS is initiated by a link of xylose to Ser residue of HS proteoglycans, followed by the formation of a linker tetrasaccharide. Then, an extension reaction of HS disaccharide occurs through polymerization of many repetitive units consisting of iduronic acid and N-acetylglucosamine. Subsequently, several modification reactions take place to complete the maturation of HS. The sulfation positions of N-, 2-O-, 6-O-, and 3-O- are all mediated by specific enzymes that may have multiple isozymes. C5-epimerization is facilitated by the epimerase enzyme that converts glucuronic acid to iduronic acid. Once these enzymatic reactions have been completed, the desulfation reaction further modifies HS. Apart from HS biosynthesis, the degradation of HS is largely mediated by the lysosome, an intracellular organelle with acidic pH. Mucopolysaccharidosis is a genetic disorder characterized by an accumulation of glycosaminoglycans in the body associated with neuronal, skeletal, and visceral disorders. Genetically modified animal models have significantly contributed to the understanding of the in vivo role of these enzymes. Their role and potential link to diseases are also discussed.     

Roles of α-Synuclein and Disease-Associated Factors in Drosophila Models of Parkinson’s Disease

α-Synuclein (αSyn) plays a major role in the pathogenesis of Parkinson’s disease (PD), which is the second most common neurodegenerative disease after Alzheimer’s disease. The accumulation of αSyn is a pathological hallmark of PD, and mutations in the SNCA gene encoding αSyn cause familial forms of PD. Moreover, the ectopic expression of αSyn has been demonstrated to mimic several key aspects of PD in experimental model systems. Among the various model systems, Drosophila melanogaster has several advantages for modeling human neurodegenerative diseases. Drosophila has a well-defined nervous system, and numerous tools have been established for its genetic analyses. The rapid generation cycle and short lifespan of Drosophila renders them suitable for high-throughput analyses. PD model flies expressing αSyn have contributed to our understanding of the roles of various disease-associated factors, including genetic and nongenetic factors, in the pathogenesis of PD. In this review, we summarize the molecular pathomechanisms revealed to date using αSyn-expressing Drosophila models of PD, and discuss the possibilities of using these models to demonstrate the biological significance of disease-associated factors.     

Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (~10 nm). With silver addition, small spherical silver metal particles (~2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism.     

Deep-level Transient Spectroscopy of GaAs/AlGaAs Multi-Quantum Wells Grown on (100) and (311)B GaAs Substrates

Si-doped GaAs/AlGaAs multi-quantum wells structures grown by molecular beam epitaxy on (100) and (311)B GaAs substrates have been studied by using conventional deep-level transient spectroscopy (DLTS) and high-resolution Laplace DLTS techniques. One dominant electron-emitting level is observed in the quantum wells structure grown on (100) plane whose activation energy varies from 0.47 to 1.3 eV as junction electric field varies from zero field (edge of the depletion region) to 4.7 × 10⁶ V/m. Two defect states with activation energies of 0.24 and 0.80 eV are detected in the structures grown on (311)B plane. The E_c-0.24 eV trap shows that its capture cross-section is strongly temperature dependent, whilst the other two traps show no such dependence. The value of the capture barrier energy of the trap at E_c-0.24 eV is 0.39 eV.     

Multi-reservoir Operation Rules: Multi-swarm PSO-based Optimization Approach

Reservoir operation rules are intended to help an operator so that water releases and storage capacities are in the best interests of the system objectives. In multi-reservoir systems, a large number of feasible operation policies may exist. System engineering and optimization techniques can assist in identifying the most desirable of those feasible operation policies. This paper presents and tests a set of operation rules for a multi-reservoir system, employing a multi-swarm version of particle swarm optimization (MSPSO) in connection with the well-known HEC-ResPRM simulation model in a parameterization–simulation–optimization (parameterization SO) approach. To improve the performance of the standard particle swarm optimization algorithm, this paper incorporates a new strategic mechanism called multi-swarm into the algorithm. Parameters of the rule are estimated by employing a parameterization–simulation–optimization approach, in which a full-scale simulation model evaluates the objective function value for each trial set of parameter values proposed with an efficient version of the particle swarm optimization algorithm. The usefulness of the MSPSO in developing reservoir operation policies is examined by using the existing three-reservoir system of Mica, Libby, and Grand Coulee as part of the Columbia River Basin development. Results of the rule-based reservoir operation are compared with those of HEC-ResPRM. It is shown that the real-time operation of the three reservoir system with the proposed approach may significantly outperform the common implicit stochastic optimization approach.     

The role of information and communication technologies (ICTs) in household energy consumption��prospects for the UK

Growing concerns about climate change and energy security have led to a strong focus on energy demand reduction and energy efficiency within United Kingdom (UK) energy policy. At the same time, information and communication technologies (ICTs) have become pervasive in society and this has brought with it new policy options which use them as enabling technologies. One such policy option planned for implementation in the UK is the use of smart meters and real-time displays to encourage people to become more aware of their energy consumption and possibly change their energy-related behaviours. Smart meters and display units by definition link individuals, technologies and society, and their effectiveness is influenced by a range of factors. Ten semi-structured stakeholder interviews with industry, government and academia and a review of literature were conducted in order to identify which factors are most likely to contribute to the effectiveness of implementing smart meters and real-time displays in the UK. Further analysis showed a number of key themes and perspectives on behavioural change, particularly as they relate to household electricity use and the role of smart meters in the UK energy policy, including the role of ICTs in energy demand reduction more generally.     

Examples of metal and resin processing using high power diode lasers

In this work, the pitting corrosion resistance of welding duplex stainless steel 2205 was studied. Joints were made using the GMAW process with different fillers: duplex ER 2209 and two austenitic fillers (ER 316LSi and ER 308LSi). The microstructure obtained with the duplex ER 2209 filler is similar to the duplex 2205 base material, but the joints produced with the austenitic fillers cause a decrease of the α/γ phase ratio. In order to evaluate the influence of the filler on the weld, the pitting corrosion resistance was determined by means of an electrochemical critical pitting temperature test, and the mechanical properties by the hardness test. The phase imbalance produced for the different fillers causes variation of the pitting corrosion resistance and the mechanical properties. The variation in the mechanical properties of the material was also studied by means of hardness tests.