甲醇氧化生产甲醛装置的工艺查定及分析(Ⅱ)

采用简捷法对两个吸收塔分别进行了计算 ,求出了理论级数、液气比、吸收率及尾气与吸收液的量和组成     

Convective condensation in a stator–rotor–stator spinning disc reactor

Centrifugal intensification of condensation heat transfer in the rotor–stator cavities of a stator–rotor–stator spinning disc reactor (srs‐SDR) is studied, as a function of rotational velocity ω, volumetric throughflow rate , and average temperature driving force . For the current range of ω, heat transfer from the vapor bubbles to the condensate liquid is limiting, due to a relatively low gas–liquid interfacial area a_GL. For rad s^?1, a strong increase of a_GL, results in increasing the reactor‐average condensation heat transfer coefficient h_c from 1600 to 5600 W m^?2 K^?1, for condensation of pure dichloromethane vapor. Condensation heat transfer in the srs‐SDR is enhanced by rotation, independent of the vapor velocity. The intensified condensation comes at the cost of relatively high energy dissipation rates, indicating condensation in the srs‐SDR is more suited as a means to supply heat (e.g. in an intensified reactor‐heat exchanger), rather than for bulk cooling purposes. © 2016 American Institute of Chemical Engineers AIChE J, 62: 3784–3796, 2016     

Wetting forces and meniscus pinning at geometrical edges

It is shown that complications in currently used optical measurements for wetting and flow resistance over edges can be circumvented by surface tension force measurements. These forces are measured by employing a modified Wilhelmy plate testing technique in which a plate with rectangular holes is immersed. The forces measured during immersion and emersion are subdivided into mass, buoyancy, and surface tension related parts, where the flow resistance when the meniscus passes horizontal faces and edges of the plate receives particular attention. Combining this experimental method with wetting theory, we show that we can predict and measure the full force curve for meniscus shape transitions over edge geometries under quasi‐static conditions. Moreover, wetting effects directly linked to surface defects can be detected qualitatively. We also point to the speed‐dependent rupture of metastable films formed during emersion. The measurement method designed is most relevant in cases where optical methods cannot be used. © 2016 The Authors AIChE Journal published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers AIChE J, 62: 4453–4465, 2016     

Poly(N-methylpyrrole) electrodeposited on copper: Corrosion protection properties

Electrochemical synthesis of poly(N-methylpyrrole) films on copper electrodes from an aqueous oxalic acid has been achieved. A potential higher than 2 V (SCE) was needed to generate the polymer, for this reason, the polymer was in the overoxidized state. The inhibiting corrosion properties of this coating on copper were investigated for the first time in aqueous 0.1 M sodium chloride solution using potentiodynamic polarization, Tafel analyses, open-circuit potential and electrochemical impedance spectroscopy. Corrosion protection properties comparable to those of polypyrrole (PPy) films were observed for these films. A physical barrier effect is the most likely protection mechanism.     

Promising curaua fiber‐reinforced polyester composite for high‐impact ballistic multilayered armor

A typical multilayered armor system (MAS) is composed of a harder front ceramic tile, which is able to erode heavy ammunition, such as the 7.62 mm bullet, followed by a second layer to further reduce the impact energy. Aramid fabric is a common choice for the second layer. In the present work, polyester matrix composites reinforced with 10 to 30 vol% of curaua fibers, despite having much lower strength and stiffness than aramid fabric, displayed similar trauma indentation in a standard clay witness simulating the human body. Impedance matching and scanning electron microscopy analyses suggest effective energy absorption through ceramic fragment capture by curaua composites. Additionally, because of the high cost of aramid fabric, a full MAS with curaua fiber composite is much cheaper than a MAS composed of aramid fabric. Taking into consideration, both the economical and environmental advantages of natural fibers, it is concluded that curaua fiber‐reinforced polyester composite could replace aramid fabric as the second layer in MASs for personal ballistic protection. POLYM. ENG. SCI., 57:947–954, 2017. © 2016 Society of Plastics Engineers     

Compressive Creep of SiC-Whisker-Reinforced Al2O3

Compressive creep of SiC-whisker-reinforced Al₂O₃ composites (0, 5, 15, and 25 wt% SiC) was measured in the temperature range of 1300° to 1500°C in air and argon. The creep resistance increased with increasing whisker concentration. The results indicated that the whiskers degraded in air, increasing strain rates compared to those in argon. Stress exponents between 1.0 and 2.0 and an activation energy of 620 ± 100 kJ/mol were measured. Transmission electron microscopy observations indicated that cavitation was minimal and that the deformed composites had the same dislocation structure as did the as-received samples.     

Apparent bidimensional critical temperature as a graphite surface homogeneity criterion

Nitrogen adsorption isotherms at 77.7 K, over graphites with different surface homogeneity, are analyzed. Three of the samples exhibited the transition from a fluid to a bidimensional solid before the monolayer was completed. The apparent bidimensional critical temperature, deduced from the Hillde Boer equation (applied to experimental isotherms), is proposed as a criterion for surface homogeneity. The calculated values range from 61 K for the most homogeneous surface to 36 K for the less homogeneous one. The estimated degrees of homogeneity are in agreement with previous experimental evidence and the surface characteristics of these samples.     

Kinetic and Quality Study of Mushroom Drying under Microwave and Vacuum

Abstract

The aim of this work is to model the drying kinetics of mushrooms under several operational conditions, to evaluate the effective diffusivity coefficient of moisture removing by a drying model and inverse calculus method in finite differences and to study the effect on the final quality of dehydrated mushrooms. Different ways of microwave vacuum drying were compared to freeze-drying. Results show that a decrement of the applied pressure produces a certain increase in the drying rate together with a lower moisture in the dehydrated product at the end. Temperature control inside the sample helps to ensure a better quality in the dehydrated product, than when controlled at the surface. Diffusivity coefficients show a correspondence with product temperature during drying. The microwave dried samples obtained with moderate power and temperature control of product shown an important degree of quality similar to that obtained by freeze-drying.