Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

Preparation and sintering behaviour of submicronic Bi4Ti3O12 powders

Submicronic powders of Bi₄Ti₃O₁₂ with different morphologies were prepared by both the oxalate coprecipitation and the conventional mixing oxides methods. Compacts of the two calcined powders were sintered at 850–1100 °C in air, and the densification process was studied by non-isothermal and dilatometric experiments. A rapid densification (> 97% theoretical density) below 875 °C took place in the Bi₄Ti₃O₁₂ oxalate powder which was attributed to an extremely uniform pore-size distribution in the green compact. The possible formation of a transient liquid which promotes densification also was taken into account. The development of plate-like morphology in the conventional Bi₄Ti₃O₁₂ powder, broad pore-size distribution, and the plate-like colony formation, hindered rapid densification of the green compacts at low temperature. Microstructural development was studied; preliminary dielectric and electrical results are also reported.     

A Survey on the Numerics and Computations for the Landau-Lifshitz Equation of Micromagnetism

The Landau-Lifshitz (LL)equation of micromagnetism governs rich variety of the evolution of magnetization patterns in ferromagnetic media. This is due to the complexity of physical quantities appearing in the LL equation. This complexity causes also an interesting mathematical properties of the LL equation: nonlocal character for some quantities,nonconvex side-constraints, strongly nonlinear terms. These effects influence also the numerical approximations. In this work, recent developments on the approximation of weak solutions, together with the overview of well-known methods for strong solutions,are addressed. Author is supported by the Fund for Scientific Research - Flanders FWO (Belgium).     

Equilibrium distribution of water in the two-phase system supercritical carbon dioxide–textile

When natural fibres are dyed in supercritical carbon dioxide, the addition of a small amount of water increases coloration. For a process design it is important to know how much water has to be added to obtain a desired humidity of both textile and carbon dioxide. In this work a thermodynamic model is proposed to calculate the distribution of water over the textile phase and the supercritical phase as a function of pressure and temperature. The phase equilibrium is described with Raoult's law for non-ideal fluids. The absorbed water in the textile is a condensed phase and is modelled here as a non-ideal liquid, using the NRTL-equation. The non-ideality of the supercritical phase is described by a solubility enhancement factor, a new equation derived from statistical thermodynamics. Although the model is applied to cotton, viscose, silk and wool, it can be used for all water absorbing textiles.     

Intelligent copyright protection system using a matching video retrieval algorithm

Many video service sites headed by YouTube know what content requires copyright protection. However, they lack a copyright protection system that automatically distinguishes whether uploaded videos contain legal or illegal content. Existing protection techniques use content-based retrieval methods that compare the features of video. However, if the video encoding has changed in resolution, bit-rate or codec, these techniques do not perform well. Thus, this paper proposes a novel video matching algorithm even if the type of encoding has changed. We also suggest an intelligent copyright protection system using the proposed algorithm. This can serve to automatically prevent the uploading of illegal content. The proposed method has represented the accuracy of 97% with searching algorithm in video-matching experiments and 98.62% with automation algorithm in copyright-protection experiments. Therefore, this system could form a core technology that identifies illegal content and automatically excludes access to illegal content by many video service sites.     

A novel dynamic pricing scheme for contributing peers in the VoD system

In this paper we have proposed a dynamic pricing scheme for the contributing peers in the Video on Demand (VoD) system. The scheme provides an effective mechanism to maximize the profit through the residual resources of the contributing peers. A utilization function is executed for each contributing peer to estimate the utility factor based on the parameters such as initial setup cost, holding cost, chaining cost and salvage cost. In this paper, we urge an effective dynamic pricing algorithm that efficiently utilizes a range of parameters with a varying degree of complexity. The key findings of the algorithm are (i) each contributing peers are benefitted by the monetary based on its resource contributions to the VoD system and (ii) a high degree of social optimum is established by proficiently aggregating the contributing peer’s resources with the overall resources of the VoD system. We validate our claim by simulating the proposed dynamic pricing scheme with other standard pricing schemes such as altruism, cost model and game theory perspective. The result of our dynamic pricing scheme shows the best utility factor than other standard pricing schemes.     

Adenovirus-Mediated Inducible Expression of a PD-L1 Blocking Antibody in Combination with Macrophage Depletion Improves Survival in a Mouse Model of Peritoneal Carcinomatosis

Immune checkpoint inhibitors (ICIs) have demonstrated remarkable efficacy in a growing number of malignancies. However, overcoming primary or secondary resistances is difficult due to pharmacokinetics issues and side effects associated with high systemic exposure. Local or regional expression of monoclonal antibodies (mAbs) using gene therapy vectors can alleviate this problem. In this work, we describe a high-capacity adenoviral vector (HCA-EFZP-aPDL1) equipped with a mifepristone-inducible system for the controlled expression of an anti-programmed death ligand 1 (PD-L1) blocking antibody. The vector was tested in an immune-competent mouse model of colorectal cancer based on implantation of MC38 cells. A single local administration of HCA-EFZP-aPDL1 in subcutaneous lesions led to a significant reduction in tumor growth with minimal release of the antibody in the circulation. When the vector was tested in a more stringent setting (rapidly progressing peritoneal carcinomatosis), the antitumor effect was marginal even in combination with other immune-stimulatory agents such as polyinosinic-polycytidylic acid (pI:C), blocking mAbs for T cell immunoglobulin, mucin-domain containing-3 (TIM-3) or agonistic mAbs for 4-1BB (CD137). In contrast, macrophage depletion by clodronate liposomes enhanced the efficacy of HCA-EFZP-aPDL1. These results highlight the importance of addressing macrophage-associated immunoregulatory mechanisms to overcome resistance to ICIs in the context of colorectal cancer.     

Multidisciplinary optimization of gas-quenching process

Distortion as a result of the quenching process is predominantly due to the thermal gradient and phase transformations within the component. Compared with traditional liquid quenching, the thermal boundary conditions during gas quenching are relatively simple to control. By adjusting the gas-quenching furnace pressure, the flow speed, or the spray nozzle configuration, the heat-transfer coefficients can be designed in terms of both the component geometry and the quenching time. The purpose of this research is to apply the optimization methodology to design the gas-quenching process. The design objective is to minimize the distortion caused by quenching. Constraints on the average surface hardness, and its distribution and residual stress are imposed. The heat-transfer coefficients are used as design variables. DEFORM-HT is used to predict material response during quenching. The response surface method is used to obtain the analytical models of the objective function and constraints in terms of the design variables. Once the response surfaces of the objective and constraints are obtained, they are used to search for the optimum heat-transfer coefficients. This process is then used instead of the finite-element analysis. A one-gear blank case study is used to demonstrate the optimization scheme.