Influence of Amorphous Grain Boundary Phases on the Superplastic Behavior of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP)

Amorphous silicate grain boundary phases of varying chemistry and amounts were added to 3Y-TZP in order to determine their influence on the superplastic behavior between 1200° and 1300°C and on the room-temperature mechanical properties. Strain rate enhancement at high temperatures was observed in 3Y-TZP containing a glassy grain boundary phase, even with as little as 0.1 wt% glass. Strain rate enhancement was greatest in 3Y-TZP with 5 wt% glass, but the room-temperature hardness, elastic modulus, and fracture toughness were degraded. The addition of glassy grain boundary phases did not significantly affect the stress exponent of 3Y-TZP, but did lower the activation energy for superplastic flow. Strain rate enhancement was highest in samples containing the grain boundary phase with the highest solubility for Y₂O₃ and ZrO₂, but the strain rate did not scale inversely with the viscosity of the silicate phases. Grain boundary sliding accommodated by diffusional creep controlled by an interface reaction is proposed as the mechanism for superplastic deformation in 3Y-TZP with and without glassy grain boundary phases.     

Enantiospecific synthesis fromd-fructose of (2S,5R)- and (2R,5R)-2-methyl-1,6-dioxaspiro[4.5]decane [the odor bouquet minor components ofParavespula vulgaris (L.)]

The synthesis of (2S,5R)-(1) and (2R,5R)-2-methyl-1,6-dioxaspiro [4.5]decane (2) from (2RS,5R,8R,9R,10S)-8,9,10-trihydroxy-2-methyl-1, 6-dioxaspiro[4.5]decane (8), obtained in five steps fromd-fructose using Wittig's methodology, reduction, and spiroketalation, has been accomplished by a Corey dideoxygenation at C-8,9, followed by a Barton deoxygenation at C-10, of the appropriately protected derivatives.Enantiospecific synthesis of spirocetals. Part V. For Part IV, see Izquierdo et al. (1992).     

Lightweight dynamic symmetry breaking

Symmetries in constraint problems present an opportunity for reducing search. This paper presents Lightweight Dynamic Symmetry Breaking, an automatic symmetry breaking method that is efficient enough to be used as a default, since it never yields a major slowdown while often giving major performance improvements. This is achieved by automatically exploiting certain kinds of symmetry that are common, can be compactly represented, easily and efficiently processed, automatically detected, and lead to large reductions in search. Moreover, the method is easy to implement and integrate in any constraint system. Experimental results show the method is competitive with the best symmetry breaking methods without risking poor performance.     

Computational Aspects of Uncertainty Profiles and Angel-Daemon Games

We analyze the complexity of equilibria problems for a class of strategic zero-sum games, called angel-daemon games. Those games were introduced to asses the performance of the execution of a web orchestration on a moderate faulty or under stress environment. Angel-daemon games are a natural example of zero-sum games whose representation is naturally succinct. We show that the problems of deciding the existence of a pure Nash equilibrium or of a dominant strategy for a given player are ${\Sigma}^{p}_{2}$ -complete. Furthermore, computing the value of an angel-daemon game is EXP-complete. Thus, our results match the already known classification of the corresponding problems for the generic families of succinctly represented games with exponential number of actions.     

Blends of i‐PP and SBS. I. Influence of the in situ compatibilization on the morphology

This article concerns the in situ compatibilization of immiscible isotactic polypropylene/butadiene‐styrene‐butadiene triblock copolymer blends (i‐PP/SBS) by means of a reactive mixture. For this purpose, maleated PP (PP‐MAH) and SBS (SBS‐MAH) were used as functionalized polymers and 4,4′‐diaminediphenylmethane was used as a coupling agent between maleated polymers, resulting in a graft copolymer. Binary blends i‐PP/SBS, nonreactive ternary blends i‐PP/PP‐MAH/SBS, and reactive ternary blends i‐PP/PP‐MAH/SBS‐MAH with varying diamine and anhydride molar ratios were prepared. Torque measurements suggest a graft copolymerization during the melt blending for ternary reactive blends, but the extension of the grafting does not vary with the diamine and anhydride molar ratio, but with the elastomer concentration. The morphology of the blends was investigated by scanning electron microscopy. The morphology of binary and ternary nonreactive blends is similar, exhibiting elastomer domains disperse in the i‐PP matrix, whose sizes increase with elastomer concentration. On the other hand, the elastomer domain size in the ternary reactive blends is practically independent of the blends composition and of the diamine and anhydride molar ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 847–855, 2002     

Reciprocal Tree-Like Fractal Structures

Sometimes the complex structures of nature inspire human constructions. Gothic construction has shown that forces can cross space along intricate paths that may even be arbitrary if correctly dimensioned. In some way, ribbed structures are like trees where the branches conduct forces instead of sap; they operate as branches and trunks descending by fractal ways. Here we discuss reciprocal tree-like fractal structures and the difficulty in their design and erection and solutions for constructive details, as well as the possible analytical questions and automatic generation by means of proper software. The results are shown in the design of the Natural Interpretation Centre in Melilla where we have proposed two connected trees like shown at figures included below.     

Effect of patchwise slip on fluid flow

In this paper, we show that large connected slip patches (hydrophobic patches) are a necessity to induce macroscopic slip effects of water flow in microchannels. For this purpose, the 2D fluid flow between a planar stationary surface with alternating stick and slip patches and a parallel planar surface moving with a constant relative velocity has been studied by computer simulations based on Navier–Stokes equations. A slip patch is defined as the slipping length in a 2D system or a slip area of the surface in a 3D system. The simulations reveal that the ratio (size of each slip patch)/(distance between the two parallel interfaces) has profound effect on the viscous stress on the moving surface when this ratio is around and above one. However, when the ratio is much below one, the effect of the slip patches are minor, even if the area fraction of slip patches are higher than 50 %. Obviously, the stick patches adjacent to the slip patches act as effective barriers, preventing the fluid velocity to increase near the surface with alternating stick and slip patches. The obtained results are scalable and applicable on all length scales, with an exception for narrow channels in the subnano regime, i.e. <1 nm where specific effects as the atomistic composition and the nanostructure of the wall as well as the interactions between the wall and the water molecules have an effect.     

A method for predicting the probability of business network profitability

In the design phase of business collaboration, it is desirable to be able to predict the profitability of the business-to-be. Therefore, techniques to assess qualities such as costs, revenues, risks, and profitability have been previously proposed. However, they do not allow the modeler to properly manage uncertainty with respect to the design of the considered business collaboration. In many real collaboration projects today, uncertainty regarding the business’ present or future characteristics is so significant that ignoring it becomes problematic. In this paper, we propose an approach based on the predictive, probabilistic architecture modeling framework (P²AMF), capable of advanced and probabilistically sound reasoning about profitability risks. The P²AMF-based approach for profitability risk prediction is also based on the e³-value modeling language and on the object constraint language. The paper introduces the prediction and modeling approach, and a supporting software tool. The use of the approach is illustrated by means of a case study originated from the Stockholm Royal Seaport smart city project.     

Enantiospecific synthesis of (R)-1,7-dioxaspiro [5.5]undecane [major component of olive fruit fly (Dacus Oleae) sex pheromone] from d-Fructose

The synthesis of the title compound13 has been carried out through the preparation of its precursor, (3R,4R,5S,6R)-3,4,5-trihydroxy-1,7-dioxaspiro[5.5]undecane (6), obtained fromd-fructose using Wittig's methodology, reduction, and spiroketalation. Compound6 was transformed into13 by a Barton deoxygenation at C-5 followed by a Corey dideoxygenation at C-3,4 of the appropriately protected derivatives.Enantiospecific synthesis of spiroacetals. Part II. For Part I, see Izquierdo and Plaza (1990).     

Why Phenolic Acids Are Unlikely Primary Allelochemicals in Rice

Allelopathy in rice (Oryza sativa, L.) effective against weeds has been found in about 3.5% of tested rice germplasm in both laboratory and field experimentation. However, the allelochemicals responsible for growth inhibition of rice-associated weeds have not yet been identified. In the literature, phenolic acids are often mentioned as putative allelochemicals. If phenolic acids commonly reach growth inhibitory concentrations in rice ecosystems, it must be expected that the degree of tolerance to phenolic acids will vary among traditional rice cultivars or plant species adapted to rice environments having inherently different phenolic acid concentrations. Phenolic acids concentrations are normally greater in submerged than in aerobic soils. A dose–response study, however, showed that seedlings of rice cultivars adapted to submerged anaerobic soils did not have higher level of tolerance against p-hydroxybenzoic acid than did seedlings of varieties adapted to aerobic upland soils. Moreover, traditional rice cultivars had no greater tolerance than did improved cultivars that were recently bred for traits other than tolerance of phenolic acids. Similarly, there were no differences in tolerance of p-hydroxybenzoic acid between two Echinochloa weed species adapted to either anaerobic or aerobic growth conditions. Thus, neither the rice cultivars nor weed species had evolved different tolerance levels against the phenolic acid. However, all rice cultivars had significantly greater tolerance of p-hydroxybenzoic acid than did either weed species. In a second experiment, the rates at which rice plants released phenolic acids into solution cultures were measured for at least one month, the time period of greatest allelopathic activity following planting under field conditions. The maximum release rate of phenolic acids during the first month of growth was approximately 10 g/plant/day. At a conventional plant density, the release rate of phenolic acids would be approximately 1 mg/m²day. This order of release rate cannot provide concentrations remotely close to phytotoxic levels determined for these rice cultivars and weed species. The results presented in this paper do not preclude the possibility that phenolic acids might be one component in a mixture of chemicals that, when present simultaneously, are allelopathic.