Impact of the addition of an enzyme pool on an activated sludge system treating dairy wastewater under fat shock loads

BACKGROUND: The application of lipase‐rich enzyme pools (such as the crude solid enzymatic preparation (SEP) obtained from Penicillium restrictum solid‐state fermentation of agro‐industrial wastes) to activated sludge systems may be an effective strategy for preventing various operational problems. The continuous addition of SEP to the treatment system can become cost‐prohibitive when in situ production and/or storage are factored in. The application of SEP to high‐fat wastewater treatment would only be justified as an emergency measure, such as a sudden increase in the fat content of the bioreactor influent. Therefore, the primary objective of this work was to investigate the efficiency of a crude SEP during fat shock loads, simulated through the periodic addition of dairy industry waste containing high fat concentrations to the feed stock of an activated sludge system, operated in continuous mode. RESULTS: The test bioreactor exhibited a higher average chemical oxygen demand (COD) removal efficiency than the control bioreactor (83% for control and 90% for test) and the fat accumulation in the biological flocs of the test bioreactor was 3.2 times lower than that in the control bioreactor. Turbidity was also lower in the effluent of the test bioreactor (123 and 66 FTU in control and test, respectively) and it had a shorter recovery time between shock loads, especially when the interval between loads was shorter than one month (biweekly and weekly shock loads). CONCLUSION: The addition of SEP during fat overloads in the reactor feed maintained efficient COD removal in the test bioreactor for 270 days without any operational problems. Copyright © 2008 Society of Chemical Industry     

Structural Response of Nuclear Containment Shield Buildings with Construction Openings

Steam generator replacement at nuclear power plants requires large construction openings in nuclear containment structures. This study examines the effects of such openings placed in a 61?cm (2?ft) thick dome of a shield building. The dome is cast in two layers, and the limiting cases of the two layers acting as one and the lower layer carrying the entire load are considered. Without openings, the stresses due to dead load in the structure are very low when compared to the material strength. With openings, the loads are easily redistributed around the opening, and the maximum stresses for the conservative case are between three and four and one-half times larger than in the original structure with no openings. The extent of the affected area around the holes is relatively small. Smooth corners in the openings are necessary to avoid high local stress concentrations.     

Pervasive 2007: It's about the User

Pervasive computing is as much about the user as it is about the technology. So, the Fifth International Conference on Pervasive Computing emphasized desirability rather than just feasibility. Featured themes included user benefits, human-computer interaction, group and social interactions, context awareness, finding and positioning people and objects, and personal privacy.     

Hydrodechlorination of 3-chloropyridine and chlorobenzene in methanol solution over alkali-modified zirconia-supported palladium catalysts

The liquid-phase hydrodechlorination of 3-chloropyridine and chlorobenzene has been studied over alkali-modified zirconia-supported palladium catalysts. The modification of the ZrO₂ with alkali metal carbonates improves the catalytic activity of the final palladium catalyst. Therefore, the larger the ionic radii (Li⁺ < Na⁺ < K⁺), the greater the catalytic activity (TOF) of the palladium catalyst. For 3-chloropyridine, hydrodechlorination proceeds without catalyst deactivation. This is explained as the result of the interaction of reaction products (pyridine and HCl) forming pyridinium chloride, thus avoiding the detrimental effect of HCl on the palladium particles. Catalytic hydrodechlorination of chlorobenzene over Pd catalysts exhibits an initial catalytic activity (TOF) much lower than that of 3-chloropyridine and the Pd catalysts deactivate as the reaction proceeds. Finally, chlorobenzene hydrodehalogenation has also been carried out in the presence of an equimolecular amount of pyridine resulting in a decrease in the initial reaction rate on the one hand, but also in an increase in final conversion on the other.     

Infrared and ultraviolet–visible spectroscopic studies of silica, [(Cp)2ZrCl2] and trimethylaluminum interactions

Infrared and UV–vis studies of metallocene immobilization on silica are reported here. The results have indicated changes in the Zr coordination sphere of metallocene depending on the immobilization route used. The reaction of [(Cp)₂ZrCl₂] with silica formed [(Cp)₂ZrCl]⁺[SiO]⁻ species. The same metallocene, reacting with TMA modified silica, formed monomethylated and dimethylated species by the substitution of chloro for methyl ligands, stabilized on the surface by interaction with “MAO-like” species (methylaluminoxane, MAO). These monomethylated and dimethylated cationic zirconium species are the active centers for the polymerization reaction. Different order of TMA addition in the silica modification step generated surface species of a similar nature, differing in their relative quantities. The highest amount of these active species was obtained when the support was added to the TMA solution rather than adding the TMA solution to the silica support. This was the most significant parameter affecting catalytic activity in ethylene polymerization.     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

An educational resource for information literacy in higher education: Functional and users analyses of the e-COMS academic portal

As in today’s knowledge society the Internet is playing an important role in the information literacy of university students the goal of this paper is to analyse, after its first year on the Web, the informational impact of an e-learning resource developed by Granada’s University lecturers (the e-COMS educational portal), a pioneer in Spain for training in information literacy. From the objective and subjective data provided by the own portal and by it users, two different and complementary kinds of analysis (functional and users’) are performed. Assessment of various capabilities, among which visibility and usability stand out, is provided. The highly positive but improvable results offer a detailed analysis of the functional aspects of the portal itself and of the users’ relations with this information resource. From these analyses strengths and weaknesses are extracted and some proposals for improvement are derived.