Spray Drying of Green Corn Pulp

Maize (Zea mays) is a cereal grown in Brazil, and its availability is limited to the harvest season. An alternative processing route is based on the production of green corn powder, which has a longer shelf-life and increased versatility. This study aimed to evaluate the influence of drying conditions on the physical characteristics, size, and morphology of green corn powder. Drying experiments were performed on a spray dryer according to a central composite rotational design to evaluate inlet air temperature, feed flow rate, and pulp concentration. The yield of dried pulp corn had an average value of 36.19%. The following mean values for the physical properties of the powder were measured: solubility of 94.37 g/100 g, wettability of 128.05 seconds, moisture content of 1.97%, water activity of 0.13, density of 0.79 g/mL, and a particle diameter of 31.02 µm. The powder was also yellow with less intensity, and the particle surface was smooth at higher temperatures and had a tendency to form agglomerates. The estimated optimal conditions for spray drying were 48% (w/w) pulp concentration, 172°C inlet air temperature, and feed flow rate of 0.56 L/h.     

Nanocomposites of ultrahigh molar mass polyethylene and modified carbon nanotubes

In this work, the use of a laboratory twin-screw extruder was evaluated to process ultrahigh molar mass polyethylene and composites with carbon nanotubes (CNTs). Commercial polymer samples with lubricant (1%) and different percentages (0.01%, 0.05%, and 0.1%) of pure, oxidized, and chemically surface treated multi-walled carbon nanotubes (MWCNTs) were evaluated. The results showed that polymer melting and crystallization temperatures were not affected by CNTs, although an increase in the degree of crystallinity in all nanocomposites was observed along with a decrease in crystal size. Therefore, CNTs behaved as nucleating agents. All ultrahigh molar mass polyethylene (UHMWPE)/CNT samples showed increased initial degradation temperature, although this was not very great when introducing acetylated and stearic acid modified CNTs. Both oxidized CNTs and stearic acid CNTs did not markedly improve the composites' mechanical properties. Therefore, the nanocomposites containing pure CNTs and most of those with acetylated CNTs resulted in higher reinforcement for UHMWPE. The addition of the lubricant allowed the polymer matrix to be processed in the extruder, whereas the increase in CNT content in UHMWPE improved the stiffness of the material. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47459     

Influence of Microstructure and Surface Activation of Dual‐Phase Membrane Ce0.8Gd0.2O2−δ–FeCo2O4 on Oxygen Permeation

Dual‐phase oxygen transport membranes are fast‐growing research interest for application in oxyfuel combustion process. One such potential candidate is CGO‐FCO (60 wt% Ce_0.8Gd_0.2O_2?δ–40 wt% FeCo₂O₄) identified to provide good oxygen permeation flux with substantial stability in harsh atmosphere. Dense CGO‐FCO membranes of 1 mm thickness were fabricated by sintering dry pellets pressed from powders synthesized by one‐pot method (modified Pechini process) at 1200°C for 10 h. Microstructure analysis indicates presence of a third orthorhombic perovskite phase in the sintered composite. It was also identified that the spinel phase tends to form an oxygen deficient phase at the grain boundary of spinel and CGO phases. Surface exchange limitation of the membranes was overcome by La_0.6Sr_0.4Co_0.2Fe_0.8O_3?δ (LSCF) porous layer coating over the composite. The oxygen permeation flux of the CGO‐FCO screen printed with a porous layer of 10 μm thick LSCF is 0.11 mL/cm² per minute at 850°C with argon as sweep and air as feed gas at the rates of 50 and 250 mL/min.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

Synthesis of trimethylolpropane esters of tall oil fatty acids and properties of polyurethane coatings on their basis

Tall oil fatty acids (TOFA) were esterified with trimethylolpropane (TMP) without a catalyst at different molar ratios of TMP to TOFA. A molar ratio was defined, at which a polyol stable in long-term storage, with the maximum content of TMP monoesters, was synthesized. Fourier transform infrared spectroscopy and gas chromatography were used for the identification of the polyols’ chemical structure and composition. Based on the synthesized polyols, polyurethane coatings were prepared. The effect of the isocyanate index and concentration of traditional Sn-based and less toxic Bi-based catalysts on the gel time of the polyurethane composition, and the mechanical and thermal properties of the coatings was studied. It was found that the new coatings had high tensile strength and modulus of elasticity, comparable with the strength and modulus of the polyurethane based on diethanolamides of TOFA. The initial temperature of decomposition of these coatings was higher than that of the polyurethanes based on esters of TOFA and a number of uralkyds. The coatings based on TMP esters of TOFA were obtained without the use of solvents, and potentially, these esters can be used in spray-applied VOC-free polyurethane coatings’ formulation.     

Thermo‐responsive polyurethane hydrogels based on poly(ethylene glycol) and poly(caprolactone): Physico‐chemical and mechanical properties

In this work, we present the synthesis and characterization of chemically crosslinked polyurethanes (PU) composed of poly(ethylene glycol) (PEG) and poly(caprolactone) diol (PCL‐diol), as hydrophilic and hydrophobic segments respectively, poly(caprolactone) triol (PCL‐triol), to induce hydrolysable crosslinks, and hexamethylene diisocyanate (HDI). The syntheses were performed at 45 °C, resulting in polyurethanes with different PEG/PCL‐diol/PCL‐triol mass fractions. All the PUs are able to crystallize and their thermal properties depend on the global composition. The water uptake capacities of the PU increase as the PEG amount increases. The water into hydrogels is present in different environments, as bounded, bulk and free water. The PU hydrogels are thermo‐responsive, presenting a negative dependence of the water uptake with the temperature for PEG rich networks, which gradually changes to a positive behavior as the amount of poly(caprolactone) (PCL) segments increases. However, the water uptake capacity changes continuously without an abrupt transition. Scanning electron microscopy (SEM) analyses of the hydrogel morphology after lyophilization revealed a porous structure. Mechanical compression tests revealed that the hydrogels present good resilience and low recovery hysteresis when they are subject to cycles of compression–decompression. In addition, the mechanical properties of the hydrogels varies with the composition and crosslinking density, and therefore with the water uptake capacity. The PU properties can be tuned to fit for different applications, such as biomedical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43573.     

Effect of self-etching dual-curing universal adhesive system application on bond strength of dentin resinous liners dentin

Purpose: The aim of this study was to evaluate the influence of previous application of an adhesive system on bond strength of resinous liner materials to dentin. Methods: Ninety bovine incisors crowns had a 6 × 6 mm area of dentin exposed, with minimum of 2 mm thickness. They were embedded in acrylic resin, and the dentin was polished with P600 SiC sandpaper for 30 s to standardize the smear layer. The specimens were divided into 6 groups (n = 15) according to the application or not of a self-etching system (Futurabond U – Voco) and the type of resinous liner used: A+Ionoseal (adhesive and Ionoseal – Voco); Ionoseal (Ionoseal only); A+Vitrebond (adhesive and Vitrebond – 3M/ESPE); Vitrebond (Vitrebond only); A+Ionosit (adhesive and Ionosit – DMG) and Ionosit (Ionosit only). Adhesives were used following manufacturer’s instructions, and the liner materials were applied inside a 2-mm-depth matrix and light-cured for 20 s. The bond strength was measured by microtensile test, using a universal testing machine with a cross-speed of 1 mm/min. Data were analyzed using one-way ANOVA and Tukey’s test (p < 0.05). Results: The adhesive system application increased bond strength of all liners tested. Ionoseal presented the highest bond strength when the adhesive system was used and exhibited similar performance to Vitrebond without adhesive. Ionosit without adhesive showed the smallest bond strength compared with the other liners tested. Conclusion: The application of an adhesive system prior to the use of the resinous liners improved the bond strength to dentin and should be preconized.     

Hierarchical porous carbon templated with silica spheres of a diameter of 14 nm from pure chitosan or a chitosan/ZnCl<Subscript>2</Subscript> solution

Nitrogen-containing mesoporous carbons with the use of colloidal silica spheres of (14 nm) and chitosan as a carbon precursor were obtained. A removal of such small template particles from carbonized silica–chitosan composite is difficult and HF with a minimum concentration of 15 wt% should be used. By varying the silica-to-chitosan ratio, the porous characteristic of products is controlled. The modification by ZnCl₂ with a molar Zn-to-C (in chitosan mass) ratio of ‘6’ results in the development of microporosity; however it is accompanied by a significant reduction of mesopore volume (V_mes). The addition of ZnCl₂ in a ratio of ‘5.25’ and pH adjustment to 5.8 increase the volumes of micropores, small mesopores, BET surface area to 1975 m²/g, and preserve V_mes of 4.15 cm³/g. The novelty of the presented strategy is the creation of microporosity in the hard-templated materials by incorporating ZnCl₂ into the mixture of Ludox HS-40 template and chitosan precursor, as well as the investigation on how the pH of synthesis influences the final porosity. The pH of a silica–chitosan–zinc solution, equal to 3.9, provides some coordination of Zn²⁺ by –OH and –NH₂ groups, whereas pH adjustment to 5.8 results in the precipitation of a new template—Zn(OH)₂.