Clarification of a wheat straw‐derived medium with ion‐exchange resins for xylitol crystallization

BACKGROUND: Xylitol bioproduction from lignocellulosic residues comprises hydrolysis of the hemicellulose, detoxification of the hydrolysate, bioconversion of the xylose, and recovery of xylitol from the fermented hydrolysate. There are relatively few reports on xylitol recovery from fermented media. In the present study, ion‐exchange resins were used to clarify a fermented wheat straw hemicellulosic hydrolysate, which was then vacuum‐concentrated and submitted to cooling in the presence of ethanol for xylitol crystallization. RESULTS: Sequential adsorption into two anion‐exchange resins (A‐860S and A‐500PS) promoted considerable reductions in the content of soluble by‐products (up to 97.5%) and in medium coloration (99.5%). Vacuum concentration led to a dark‐colored viscous solution that inhibited xylitol crystallization. This inhibition could be overcome by mixing the concentrated medium with a commercial xylitol solution. Such a strategy led to xylitol crystals with up to 95.9% purity. The crystallization yield (43.5%) was close to that observed when using commercial xylitol solution (51.4%). CONCLUSION: The experimental data demonstrate the feasibility of using ion‐exchange resins followed by cooling in the presence of ethanol as a strategy to promote the fast recovery and purification of xylitol from hemicellulose‐derived fermentation media. Copyright © 2008 Society of Chemical Industry     

Influence of the ethylene–(methacrylic acid)–Zn2+ ionomer on the thermal and mechanical properties of blends of poly(propylene) (PP)/ethylene–(vinyl alcohol) copolymer (EVOH)

The thermal and mechanical properties and the morphologies of blends of poly(propylene) (PP) and an ethylene–(vinyl alcohol) copolymer (EVOH) and of blends of PP/EVOH/ethylene–(methacrylic acid)–Zn²⁺ ionomer were studied to establish the influence of the ionomer addition on the compatibilization of PP/EVOH blends and on their properties. The oxygen transmission rate (O₂TR) values of the blends were measured as well. PP and EVOH are initially incompatible as was determined by tensile tests and scanning electronic microscopy. Addition of the ionomer Zn²⁺ led to good compatibility and mechanical behaviour was improved in all blends. The mechanical properties on extruded films were studied for 90/10 and 80/20 w/w PP/EVOH blends compatibilized with 10 % of ionomer Zn²⁺. These experiments have shown that the tensile properties are better than in the injection‐moulded samples. The stretching during the extrusion improved the compatibility of the blends, diminishing the size of EVOH domains and enhancing their distribution in the PP matrix. As was to be expected, the EVOH improved the oxygen permeation of the films, even in compatibilized blends. Copyright © 2004 Society of Chemical Industry     

N.m.r. line shape-relaxation correlation analysis of bitumen and oil sands

The first results of the analysis of bitumen and oil sands using the recently developed n.m.r. spingrouping technique are presented. The n.m.r. relaxation experiments were carried out on bitumen, and on natural and dried oil sands samples. The results indicate that the spin-grouping can resolve and quantify several components of the samples studied. The bitumen and bitumen fraction of the oil sands are resolved according to their spin-spin relaxation times into three major groups: solid-like (rigid), solid-like (mobile) and semi-liquid. The water in the oil sands exists in two different environments. Tentatively one environment is assigned to be the bridges between the sand grains, while the other is assigned to be the clay surface. One can conclude that with spin grouping of complex mixtures the decomposition (in which components are resolved according to their dynamic state) is possible. The accuracy of such resolution is of the order of a few per cent.     

Biodegradable hollow microfibres to produce bioactive scaffolds

Biodegradable hollow microfibres containing particles loaded with specific active agents can be potentially employed to produce a special kind of substrate for tissue engineering, able to function as a scaffold and at the same time to act as a drug‐releasing system. Biodegradable hollow microfibres based on poly(lactic acid) were produced by a dry–wet spinning procedure. Drug‐loaded microparticles were prepared by a simple oil‐in‐water emulsion and entrapped inside the fibres. The morphology of both fibres and particles was investigated by scanning electron microscopy. The mechanical and thermal properties of the fibres were investigated by tensile tests and differential scanning calorimetry. In vitro tests were performed to evaluate the release of the drug from the fibres loaded with the particles Copyright © 2004 Society of Chemical Industry     

Retaining maximum antioxidative potency of wheat germ oil refined by molecular distillation

A process of physical refining wheat germ oil using the technique of molecular distillation (MD) is presented in this work. Wheat germ oil was obtained from the germ by solvent extraction using hexane and also by cold pressing. The oil extracted with hexane was degummed and bleached before deacidification in order to modify the parameters of phosphorus and color. The goal in carrying out the stage of physical refining by MD was to preserve the maximum amount of original antioxidative potential obtained from extraction of the crude oil. The effect of evaporation temperature of one‐stage MD on the efficiency of free fatty acid elimination was studied. The antioxidant portion was followed by means of analytic determination of tocopherols by high‐performance liquid chromatography. Tocopherol retention up to 98% was achieved in the oil extracted by pressing, and yields of up to 96% were achieved in the oil extracted with hexane. Copyright © 2007 Society of Chemical Industry     

Structural Response of Nuclear Containment Shield Buildings with Construction Openings

Steam generator replacement at nuclear power plants requires large construction openings in nuclear containment structures. This study examines the effects of such openings placed in a 61?cm (2?ft) thick dome of a shield building. The dome is cast in two layers, and the limiting cases of the two layers acting as one and the lower layer carrying the entire load are considered. Without openings, the stresses due to dead load in the structure are very low when compared to the material strength. With openings, the loads are easily redistributed around the opening, and the maximum stresses for the conservative case are between three and four and one-half times larger than in the original structure with no openings. The extent of the affected area around the holes is relatively small. Smooth corners in the openings are necessary to avoid high local stress concentrations.     

Pervasive 2007: It's about the User

Pervasive computing is as much about the user as it is about the technology. So, the Fifth International Conference on Pervasive Computing emphasized desirability rather than just feasibility. Featured themes included user benefits, human-computer interaction, group and social interactions, context awareness, finding and positioning people and objects, and personal privacy.     

Continuous and Discontinuous Innovation: Overcoming the Innovator Dilemma

Challenged by competition pressures and unprecedented pace of change, firms can no longer choose whether to concentrate on the needs of today's customers or on the anticipation of those of tomorrow: they must be excellent in both. This requires managing two related balancing acts: on the one side, being excellent in both exploitation and exploration of their capabilities and, on the other side, being excellent in managing both incremental and radical innovation. These balances are critical since exploitation and exploration, on the one side, and incremental and radical innovation, on the other, require different approaches that have traditionally been considered difficult to combine within the same organization. Working on evidence and discussion from the 7th CINet Conference held in Lucca (Italy) in 2006, this Special Section is aimed at contributing to theory and practice on these two complex balancing acts that today represent a hot issue in innovation management.