Effect of nonionic detergents on lipoxygenase catalysis

In many studies on lipoxygenase catalysis, nonionic detergents are used to obtain an optically transparent solution of the fatty acid substrate. In order to resolve some controversies that exist with regard to the interpretation of kinetic data obtained with solutions containing nonionic detergents, a systematic investigation was undertaken into the effects of Lubrol, Tween-20 and Triton X-100 (0–0.8 g/L) on the kinetics of linoleate (2.5–110 μM) dioxygenation, catalyzed by lipoxygenase-1 or lipoxygenase-2 from soybean, at pH 9 or 10, at 25°C. Under most conditions, it was found that the detergents slowed down the reaction. However, at high linoleate concentrations, where substrate inhibition of lipoxygenase is significant, small amounts of detergent increased the dioxygenation rate. In a quantitative analysis of the results, a kinetic model in which the incorporation of linoleate in the detergent micelles is formulated as a simple reversible equilibrium, and in which both lipoxygenase-1 and-2 interact with free linoleate, but not with linoleate incorporated in the micelles, appeared to be sufficient to predict experimental results over a wide range of experimental conditions. According to this model, the changes in the dioxygenation kinetics caused by the presence of nonionic detergents are similar (but not equal) to those caused by competitive inhibitors. The conclusions that monomeric, nonmicellar linoleate is the preferred substrate for lipoxygenase and that the observed inhibition and stimulation are solely due to changes in the effective linoleate concentration strongly corroborate the earlier observations by Galpin and Allen [Biochim. Biophys. Acta 488 (1977), 392–401].     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

Characterization of poly(diethoxyphosphazene) by size exclusion chromatography and viscometry

Two samples of poly(diethoxyphosphazene) (PDEP) having very different molecular weights have been studied by viscometry and size exclusion chromatography in THF solution. The results obtained, together with light scattering data of these samples, allow the calculation of the Mark-Houwink constants a=0.65 and K=2.5 10^-4 in THF at 25°C. The method of calculation employed takes into account the great polydispersity of the samples. The characteristic ratio of the unperturbed dimensions was also calculated giving C_n = r²_o/n² 18, a value slightly higher than those previously reported for poly(dihexoxyphosphazene), C_n13 and poly (dichlorophosphazene), C_n13.5.     

Composition and thermal properties of Rhea oil and its fractions

The rhea (Rhea americana) is a large running bird of the ratite family, native to South America. Oil extracted from rhea fat tissue is used in cosmetic manufacture. Here, the thermal behaviour and the fatty acid and triacylglycerol composition of Uruguayan rhea oil are studied. The results are compared with those obtained from two commercial samples of emu oil. The fatty acid profiles of emu and rhea oils are similar. Small variations are reflected in the non‐identical thermal behaviour of the oils. The solid content of both oils is fairly similar at room temperature. Thus, emu oil and rhea oil may replace one another in certain formulations, without resulting in important changes in physicochemical behaviour. The semisolid rhea oil was fractionated in two successive stages: an olein was obtained at 15 °C, which was refractionated at 10 °C. The thermogram of the olein obtained by cooling at 15 °C does not have the peak found at 34 °C in the thermogram of the original oil and is a softer product than the original oil. A further stage of fractionation of this olein produced a new liquid phase of slightly different thermal behaviour from that of the original olein. This product has a solid fat index around 7% at 15 °C and has melted completely at 20 °C. This second olein has more appropriate physical characteristics than those of the olein obtained from the first fractionation when used in liquid cosmetic formulations.     

Study of the sorption and acidic properties of MTW-type zeolite

The acidity of H-MTW-type zeolite has been investigated using infrared spectroscopy of adsorbed pyridine. Pore volume has been measured by nitrogen andn-hexane adsorption. The zeolite exhibits infrared signals at 3612 and 3580 cm^–1 tentatively attributed to bridging hydroxyl groups vibrating in the main channel and in the six-membered rings of the structure, respectively. Both hydroxyl groups possess high acid strength and are readily accessible to pyridine. H-MTW shows an-hexane cracking activity at 350°C comparable to that obtained with MFI and BEA-type materials with a product selectivity between medium and large pore structural types.     

Digestibility and nutritional value of crude oil from three amaranth species

Oils from a selection ofAmaranthus caudatus, A. hypochondriacus andA. cruentus were extracted with hexane. The crude oils were analyzed for acid value, saponification and iodine number, and were included in basal casein diets for rat studies at 5 and 10% levels to replace equal amounts of refined cottonseed oil. The oils fromA. cruentus andA. hypochondriacus were similar in the oil properties studied and different fromA. caudatus. At either 5 or 10% food intake levels, weight gain and PER were not statistically different from values reported for cottonseed oil. True digestibility of amaranth oil was lower than that of cottonseed oil.A. cruentus oil gave the lowest digestibility. Oil levels induced statistical differences in food intake and digestibility. Oils fromA. caudatus, A. hypochondriacus and cottonseed induced similar serum cholesterol levels, while oil fromA. cruentus gave statistically higher values. Hemoglobin, hematocrit and serum proteins were similar among all groups. Microscopic analysis of the organs of the rats revealed some changes that were also found in cottonseed oil-fed rats. It was concluded that crude amaranth oil has lower digestibility than cottonseed oil, but that it is not responsible for growth-depressing effects when the seed is fed raw as compared to processed materials.     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Modelling the effects of human papillomavirus in cervical cells

Worldwide, cervical cancer is the second most common cancer in women, after breast cancer. The prevalence of this malignant disease is estimated at 1.4 million cases worldwide, causing about 290,000 deaths and 500,000 new cases per year, of which 80% correspond to women living in developing countries. In this work we propose a family of ordered models for basal cells of the cervix corresponding to different stages ranging from normal cells to the formation of precancerous lesions. We analyse the first member of the family analytically and for the second member we developed a non-standard numerical method in order to extract some biological information.     

Reduction of sulphur in PbSPbCl2NaCl melts

The reduction of dissolved sulphur and the soluble species formed during the electrolysis of PbS dissolved in the PbCl₂NaCl eutectic has been studied chronopotentiometrically. The pre-lead reduction process reported earlier[1] can now be assigned to a subsulphide species that is generated electrochemically. At higher PbS concentrations (eg 10^?3 mol cm^?3), elemental sulphur introduces a new reduction wave in addition to the subsulphide. The saturation solubility of sulphur is approximately proportional to the square of the PbS concentration. It has been estimated to be 2.3× 10^?4 mol S cm^?3 at 430°C for a melt containing 2.4× 10^?3 mol PbS cm^?3 in the PbCl₂-NaCl eutectic.     

Alkali silica reactivity of agglomerated silica fume

It is commonly accepted that replacement of a portion of cement in mortar or concrete with well-dispersed silica fume reduces expansion caused by alkali silica reaction. Recently there has been much discussion that large, agglomerated particles of silica fume may actually act as alkali silica reactive aggregates, thereby increasing expansion rather than reducing it. The data in the literature, from both field and laboratory studies, are inconsistent. This prompted an extensive laboratory investigation into the alkali silica reactivity of silica fume. Results from accelerated expansion testing and microscopic investigations are presented. It was seen that some agglomerated silica fumes participate in ASR while others do not. Factors determining the reactivity of silica fume agglomerates are suggested.