Reduction of sulphur in PbSPbCl2NaCl melts

The reduction of dissolved sulphur and the soluble species formed during the electrolysis of PbS dissolved in the PbCl₂NaCl eutectic has been studied chronopotentiometrically. The pre-lead reduction process reported earlier[1] can now be assigned to a subsulphide species that is generated electrochemically. At higher PbS concentrations (eg 10^?3 mol cm^?3), elemental sulphur introduces a new reduction wave in addition to the subsulphide. The saturation solubility of sulphur is approximately proportional to the square of the PbS concentration. It has been estimated to be 2.3× 10^?4 mol S cm^?3 at 430°C for a melt containing 2.4× 10^?3 mol PbS cm^?3 in the PbCl₂-NaCl eutectic.     

Alkali silica reactivity of agglomerated silica fume

It is commonly accepted that replacement of a portion of cement in mortar or concrete with well-dispersed silica fume reduces expansion caused by alkali silica reaction. Recently there has been much discussion that large, agglomerated particles of silica fume may actually act as alkali silica reactive aggregates, thereby increasing expansion rather than reducing it. The data in the literature, from both field and laboratory studies, are inconsistent. This prompted an extensive laboratory investigation into the alkali silica reactivity of silica fume. Results from accelerated expansion testing and microscopic investigations are presented. It was seen that some agglomerated silica fumes participate in ASR while others do not. Factors determining the reactivity of silica fume agglomerates are suggested.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

A formal representation for context-aware business processes

A business process is a set of activities performed in a coordinated manner within an organizational and technical environment that is aimed toward a business goal. The flexibility of a process is related to an understanding of the unexpected events that occur when people, systems and resources interact and require adjustments. Thus, business processes must be designed to respond to information about different events and their specificity. This information defines what the literature calls “context”. To broaden the perception of context in the case of a business process, this work proposes an approach to characterize the context of a business process activity in a given domain through conceptual models structured in layers. A case study was conducted to evaluate the proposal, which provided evidence of the applicability of the model.     

Influence of Amorphous Grain Boundary Phases on the Superplastic Behavior of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP)

Amorphous silicate grain boundary phases of varying chemistry and amounts were added to 3Y-TZP in order to determine their influence on the superplastic behavior between 1200° and 1300°C and on the room-temperature mechanical properties. Strain rate enhancement at high temperatures was observed in 3Y-TZP containing a glassy grain boundary phase, even with as little as 0.1 wt% glass. Strain rate enhancement was greatest in 3Y-TZP with 5 wt% glass, but the room-temperature hardness, elastic modulus, and fracture toughness were degraded. The addition of glassy grain boundary phases did not significantly affect the stress exponent of 3Y-TZP, but did lower the activation energy for superplastic flow. Strain rate enhancement was highest in samples containing the grain boundary phase with the highest solubility for Y₂O₃ and ZrO₂, but the strain rate did not scale inversely with the viscosity of the silicate phases. Grain boundary sliding accommodated by diffusional creep controlled by an interface reaction is proposed as the mechanism for superplastic deformation in 3Y-TZP with and without glassy grain boundary phases.     

Enantiospecific synthesis fromd-fructose of (2S,5R)- and (2R,5R)-2-methyl-1,6-dioxaspiro[4.5]decane [the odor bouquet minor components ofParavespula vulgaris (L.)]

The synthesis of (2S,5R)-(1) and (2R,5R)-2-methyl-1,6-dioxaspiro [4.5]decane (2) from (2RS,5R,8R,9R,10S)-8,9,10-trihydroxy-2-methyl-1, 6-dioxaspiro[4.5]decane (8), obtained in five steps fromd-fructose using Wittig's methodology, reduction, and spiroketalation, has been accomplished by a Corey dideoxygenation at C-8,9, followed by a Barton deoxygenation at C-10, of the appropriately protected derivatives.Enantiospecific synthesis of spirocetals. Part V. For Part IV, see Izquierdo et al. (1992).     

Lightweight dynamic symmetry breaking

Symmetries in constraint problems present an opportunity for reducing search. This paper presents Lightweight Dynamic Symmetry Breaking, an automatic symmetry breaking method that is efficient enough to be used as a default, since it never yields a major slowdown while often giving major performance improvements. This is achieved by automatically exploiting certain kinds of symmetry that are common, can be compactly represented, easily and efficiently processed, automatically detected, and lead to large reductions in search. Moreover, the method is easy to implement and integrate in any constraint system. Experimental results show the method is competitive with the best symmetry breaking methods without risking poor performance.     

Computational Aspects of Uncertainty Profiles and Angel-Daemon Games

We analyze the complexity of equilibria problems for a class of strategic zero-sum games, called angel-daemon games. Those games were introduced to asses the performance of the execution of a web orchestration on a moderate faulty or under stress environment. Angel-daemon games are a natural example of zero-sum games whose representation is naturally succinct. We show that the problems of deciding the existence of a pure Nash equilibrium or of a dominant strategy for a given player are ${\Sigma}^{p}_{2}$ -complete. Furthermore, computing the value of an angel-daemon game is EXP-complete. Thus, our results match the already known classification of the corresponding problems for the generic families of succinctly represented games with exponential number of actions.     

Blends of i‐PP and SBS. I. Influence of the in situ compatibilization on the morphology

This article concerns the in situ compatibilization of immiscible isotactic polypropylene/butadiene‐styrene‐butadiene triblock copolymer blends (i‐PP/SBS) by means of a reactive mixture. For this purpose, maleated PP (PP‐MAH) and SBS (SBS‐MAH) were used as functionalized polymers and 4,4′‐diaminediphenylmethane was used as a coupling agent between maleated polymers, resulting in a graft copolymer. Binary blends i‐PP/SBS, nonreactive ternary blends i‐PP/PP‐MAH/SBS, and reactive ternary blends i‐PP/PP‐MAH/SBS‐MAH with varying diamine and anhydride molar ratios were prepared. Torque measurements suggest a graft copolymerization during the melt blending for ternary reactive blends, but the extension of the grafting does not vary with the diamine and anhydride molar ratio, but with the elastomer concentration. The morphology of the blends was investigated by scanning electron microscopy. The morphology of binary and ternary nonreactive blends is similar, exhibiting elastomer domains disperse in the i‐PP matrix, whose sizes increase with elastomer concentration. On the other hand, the elastomer domain size in the ternary reactive blends is practically independent of the blends composition and of the diamine and anhydride molar ratio. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 847–855, 2002     

Reciprocal Tree-Like Fractal Structures

Sometimes the complex structures of nature inspire human constructions. Gothic construction has shown that forces can cross space along intricate paths that may even be arbitrary if correctly dimensioned. In some way, ribbed structures are like trees where the branches conduct forces instead of sap; they operate as branches and trunks descending by fractal ways. Here we discuss reciprocal tree-like fractal structures and the difficulty in their design and erection and solutions for constructive details, as well as the possible analytical questions and automatic generation by means of proper software. The results are shown in the design of the Natural Interpretation Centre in Melilla where we have proposed two connected trees like shown at figures included below.