InSAR validation based on GNSS measurements in Bucharest

This research aims to complex validate radar displacement products over Bucharest based on Global Navigation Satellite System or GNSS. Validation was represented by the comparison of the recent TerraSAR-X (TSX) displacement results with field GNSS data. For this purpose, 24 and 27 high-resolution images acquired from the TSX satellite between 2011 and 2014 were processed by Permanent Scatterer Inteferometry (PSI) and Small BASeline Subset (SBAS) – interferometric techniques using synthetic aperture radar (SAR) images. The images were selected from a larger pool of SAR images, after consulting weather databases, which helped eliminate the images acquired under adverse weather conditions. GNSS locations were cross-checked on high-resolution optical images and 21 ground points (including three permanent stations) were selected. All these points were (1) characterized by high coherence on radar images; (2) were on the ground; (3) were situated in large vacant spaces; and (4) far away from radar obstacles such as trees. A major challenge in achieving the research goal was to overcome the lack of permanent stations at the ground level within the area of Bucharest. Instead of permanent stations, our team designed and installed forced centring systems that remained stable over time, eliminating the instalment errors of GNSS receivers. The line-of-site (LOS) components derived from GNSS data have been compared with those of the SAR scatterers closest to the GNSS markers (never coinciding). For each location, the vertical reading was projected in the LOS of the SAR sensor. These readings were compared with the displacement values determined at the locations of permanent scatterers (PSs) within 100 m from the GNSS nodes, by eliminating all scatterers on buildings. The comparison has shown a good agreement.     

The EU data protection reform and the challenges of big data: remaining uncertainties and ways forward

As the first broad reform of the EU data protection legislation is being achieved, and notwithstanding EU institutions’ confident discourse, scepticism remains about the reform’s ability to safeguard the fundamental right to data protection in the face of evolving data processing techniques underlying so-called big data. Yet, one might wonder whether the cause for this difficulty should be ascribed mainly to technological progresses that the law finds it hard to deal with or rather to the policy choices embedded in the legal reform itself. Indeed, a new data protection enforcement model is being adopted, which relies heavily on risk assessment and management by the data controllers themselves. Likewise, data protection authorities see their supervisory role significantly weakened. These developments and the underlying rationality are discussed. Given the limitations of the risk-based approach as currently devised, we suggest that it be reappraised in consideration of risk regulatory experiences in other domains.     

Managing the requirements flow from strategy to release in large-scale agile development: a case study at Ericsson

In a large organization, informal communication and simple backlogs are not sufficient for the management of requirements and development work. Many large organizations are struggling to successfully adopt agile methods, but there is still little scientific knowledge on requirements management in large-scale agile development organizations. We present an in-depth study of an Ericsson telecommunications node development organization which employs a large scale agile method to develop telecommunications system software. We describe how the requirements flow from strategy to release, and related benefits and problems. Data was collected by 43 interviews, which were analyzed qualitatively. The requirements management was done in three different processes, each of which had a different process model, purpose and planning horizon. The release project management process was plan-driven, feature development process was continuous and implementation management process was agile. The perceived benefits included reduced development lead time, increased flexibility, increased planning efficiency, increased developer motivation and improved communication effectiveness. The recognized problems included difficulties in balancing planning effort, overcommitment, insufficient understanding of the development team autonomy, defining the product owner role, balancing team specialization, organizing system-level work and growing technical debt. The study indicates that agile development methods can be successfully employed in organizations where the higher level planning processes are not agile. Combining agile methods with a flexible feature development process can bring many benefits, but large-scale software development seems to require specialist roles and significant coordination effort.     

Beyond utilitarian factors: User experience and travel company website successes

Travel websites are extensively used by travelers for their travel bookings, yet little is known about the hedonic effectiveness of such experiences for the customer. The end users of these websites are customers who may not always be sophisticated information system (IS) users. Further, traditional utility based measures of customer evaluation are dated with respect to the interactive nature of the technology in use and the hedonic benefits that may result from the use of the technology. The evaluation of IS needs to include hedonic measures facilitated by the interactive technology in addition to the traditional utility based measures. We propose and test an evaluation model for retail travel websites that combines the traditional utility based measures with hedonic measures which collectively create a more comprehensive measure for the IS evaluation of consumer focused websites. Thus rooted in theory, the model extends DeLone and McLean’s model of IS Success by adding the construct of User Experience. The model was tested on a sample of 255 customers of travel websites targeted at the Indian market. The results indicate that both utility based and hedonic measures are important factors for customer IS (travel website in this study) evaluation. The larger implications for theory and practice of IS evaluation are explained.     

Precarious employment, working hours, work-life conflict and health in hotel work

Precarious or temporary work is associated with adverse outcomes including low control over working hours, work-life conflict and stress. The rise in precarious employment is most marked in the service sector but little research has been done on its health effects in this sector. This study compares permanent and temporary workers in the hotel industry, where working hours are highly variable. Survey data from 150 workers from eight 3-Star hotels in urban and regional areas around Sydney were analyzed. Forty-five per cent were male and 52 per cent were female. Fifty four per cent were permanent full-time and 46 per cent were temporary workers. The effects of employment status on perceived job security, control over working hours, and work-life conflict are investigated using PLS-Graph 3.0. The effects of control over working hours, on work-life conflict and subsequent health outcomes are also explored. Temporary workers perceived themselves as less in control of their working hours, than permanent workers (β = .27). However, they also reported lower levels of work intensity (β = .25) and working hours (β = .38). The effects of low hours control (β = .20), work intensity (β = .29), and excessive hours (β = .39) on work-life conflict (r² = .50), and subsequent health effects (r² = .30), are illustrated in the final structural equation model.     

Maximal controllability of input constrained unstable systems by the addition of implicit constraints

The null controllable set of a system is the largest set of states that can be controlled to the origin. Control systems that have a region of attraction equal to the null controllable set are said to be maximally controllable closed-loop systems. In the case of open-loop unstable plants with amplitude constrained control it is well known that the null controllable set does not cover the entire state-space. Further the combination of input constraints and unstable system dynamics results in a set of state constraints which we call implicit constraints. It is shown that the simple inclusion of implicit constraints in a controller formulation results in a controller that achieves maximal controllability for a class of open-loop unstable systems.     

Persistent Scatterers Interferometry detects and measures ground subsidence in Lisbon

Results from the application of Persistent Scatterers Interferometry in Lisbon Metropolitan Area revealed two previously unknown subsiding urban areas: one (Laranjeiras) is located in the center of Lisbon; another (Vialonga) is to be found toward the North, in an industrial region crossed by Lisbon's main highway and railway lines. The two subsiding sectors are bordered by sharp velocity gradients, and the subsidence pattern appears partially delimited by mapped geologic faults. Surface geology and urbanization alone are unable to explain the phenomena. In the Vialonga area, the historical record of water pore pressure shows a clear decline of the levels (up to 65 m in 27 years), providing evidence of over-exploitation of groundwater resources. Limited information from wells drilled inside and outside the subsidence area points to a spatial correlation between the subsidence and the water pressure levels, and suggests that faults could be acting as hydraulic barriers in the aquifer system. The surface subsidence detected is probably caused by compaction of a clay-rich Oligocene-aged aquitard, led by over-exploitation of adjacent aquifers. The same Oligocene aquitard layer is present in the Laranjeiras area, immediately bellow a multi-layered sand-clay-limestone Miocene aquifer, but further work is needed to diagnose the possibility of over-exploitation of groundwater here. In this work we were able to independently confirm the PSI results, by comparing autonomous PSI results processed for the same geographical areas, and by comparing PSI with leveling and continuous GPS derived subsidence velocities, whose close match provided further ground validation of the space-borne PSI technique.     

Rough set based approaches to feature selection for Case-Based Reasoning classifiers

This paper investigates feature selection based on rough sets for dimensionality reduction in Case-Based Reasoning classifiers. In order to be useful, Case-Based Reasoning systems should be able to manage imprecise, uncertain and redundant data to retrieve the most relevant information in a potentially overwhelming quantity of data. Rough Set Theory has been shown to be an effective tool for data mining and for uncertainty management. This paper has two central contributions: (1) it develops three strategies for feature selection, and (2) it proposes several measures for estimating attribute relevance based on Rough Set Theory. Although we concentrate on Case-Based Reasoning classifiers, the proposals are general enough to be applicable to a wide range of learning algorithms. We applied these proposals on twenty data sets from the UCI repository and examined the impact of feature selection over classification performance. Our evaluation shows that all three proposals benefit the basic Case-Based Reasoning system. They also present robustness in comparison to well-known feature selection strategies.     

Optimal allocation of change points in simple step-stress experiments under Type-II censoring

In simple step-stress experiments under Type-II censoring with the cumulative exposure model and exponentially distributed lifetimes, maximum likelihood estimates (MLE) of the expected lifetimes may not exist due to the absence of failure times either before or after the stress change point. For this reason, when planning a step-stress experiment, the change point could be chosen so as to minimize the probability of non-existence of the MLE. These non-existence probabilities are examined and compared in the one- as well as the two-sample situations. Moreover, the optimal allocations of the change points are discussed and the effects of the use of non-optimal choices for the change points are assessed.     

A model of cerebral cortex formation during fetal development using reaction-diffusion-convection equations with Turing space parameters

The cerebral cortex is a gray lamina formed by bodies of neurons covering the cerebral hemispheres, varying in thickness from 1.25 mm in the occipital lobe to 4 mm in the anterior lobe. The brain's surface is about 30 times greater that of the skull because of its many folds; such folds form the gyri, sulci and fissures and mark out areas having specific functions, divided into five lobes. Convolution formation may vary between individuals and is an important feature of brain formation; such patterns can be mathematically represented as Turing patterns. This article describes how a phenomenological model was developed by describing the formation pattern for the gyri occurring in the cerebral cortex by reaction diffusion equations with Turing space parameters. Numerical examples for simplified geometries of a brain were solved to study pattern formation. The finite element method was used for the numerical solution, in conjunction with the Newton–Raphson method. The numerical examples showed that the model can represent cerebral cortex fold formation and reproduce pathologies related to gyri formation, such as polymicrogyria and lissencephaly.