Optical properties of Nb-doped TiO2 thin films prepared by sol–gel method

In this work, we studied optical properties of pure and Nb-doped TiO₂ synthesized using a sol–gel method and deposited as thin films by spin-coating followed by annealing in air at 500 °C for 1 h. The surface elemental composition was derived from X-ray photoelectron spectra, while structure and surface morphology were investigated using X-ray diffraction and atomic force/scanning electron microscopy. Finally, the optical properties were investigated by means of UV–vis spectrophotometry and spectroscopic ellipsometry.The Nb content was determined from XPS measurements to vary between 1.8 and 4.3 at%. The XRD patterns of the deposited thin films, with a maximum thickness of about 56 nm, showed no diffraction peaks. As proven both by microscopy and spectroscopic ellipsometry studies doping TiO₂ with Nb modified the surface morphology of the samples; the grain size is increasing while the surface roughness decreases with the increase in Nb content. This is accompanied by a decrease in the refractive index and an increase of the extinction coefficient.     

Rhodium‐Catalyzed Enantioselective Hydrogenation of (E)‐Enol Acetate Acids

The novel rhodium complex [Rh(S)‐Phanephos(cod)]‐catalyzed hydrogenation of disubstituted (E)‐enol acetate carboxylic acids is reported. The catalytic cycle works under 30 bar of hydrogen under conventional heating giving different 3‐acetoxy‐2,3‐disubstituted carboxylic acids with ee ≥90%. Hydrogenation occurred also under microwave dielectric heating without eroding the enantioselectivity but improving the overall efficiency of the process. With microwaves, hydrogen pressure and reaction time required for complete hydrogenation dropped to 5 bar and 30 min, respectively. The best performance of this catalyst under microwave irradiation was TON 100, TOF 196 h⁻¹ with ee 99% on a 6‐g scale.     

永磁同步伺服电机在注塑机中的应用

文章对比了同步电机与异步电机在性能、效率等方面的优缺点，以及海天公司在变频注塑机上的控制技术。测试证明，利用该技术与同步电机的注塑机，比使用变量泵的注塑机节能20％～30％。同时，系统的响应性和可控性都有较大提高。     

Synthesis of Fluorinated Hyperbranched Polymers and Their Use as Additives in Cationic Photopolymerization

Summary: A fluorine containing hyperbranched polymer was synthesized by modifying an aromatic‐aliphatic hyperbranched polyester with a semifluorinated alcohol via a Mitsunobu reaction and was subsequently used as an additive in cationic photopolymerization of an epoxy resin. The remaining OH groups of the fluorinated hyperbranched polymer interact with the polymeric carbocation through a chain‐transfer mechanism inducing an increase in the final epoxy conversion. The fluorinated HBP induces modification of bulk and surface properties, with an increase in T_g and surface hydrophobicity already reached at very low concentration. The HBFP additive can, therefore, protect the coatings from aggressive solvents, increases hardness, and allows the preparation of a low energy surface coating.

Synthesis of fluorinated hyperbranched polyester.     

Reactively Modified Poly(lactic acid): Properties and Foam Processing

Summary: In order to produce modified poly(lactic acid) (PLA) resins for applications requiring high melt viscosity and elasticity (e.g., low‐density foaming, thermoforming), a commercial PLA product has been reactively modified in melt by sequentially adding 1,4‐butanediol and 1,4‐butane diisocyanate as low‐molecular‐weight chain extenders. By varying amounts of the two chain extenders associated to the end group contents of PLA, three resulted samples were obtained. They were then structurally characterized by FTIR spectroscopy and molecular structure analysis. Their thermal, dynamic mechanical thermal properties and melt viscoelastic properties were investigated and compared along with unmodified PLA. The results indicated that chemical modification may be characterized as chain scission, extension, crosslinking, or any combination of the three depending on the chain extender amounts. The increase of PLA molecular weight could be obtained by properly controlling amounts of two chain extenders. The samples with increased molecular weights showed enhanced melt viscosity and elasticity. Such property improvements promised a successful application for modified PLA in a batch foam processing by producing foams with reduced cell size, increased cell density and lowered bulk foam density in comparison with plain PLA foam.

Cellular morphology of a modified PLA foam.     

Solvent and oxygen effects on the free radical polymerization of 6-O-vinyladipoyl-d-glucopyranose

The vinyl ester-type glycomonomer 6-O-vinyladipoyl-d-glucopyranose was polymerized in water and alcohol solutions. In all cases, long polymerization times were necessary to achieve reasonable conversions. Depending on the nature of the solvent, polydisperse glycopolymers were obtained possessing a molecular weight ranging between 10,000 and 122,000 Da (PS equivalent). Higher alcohols appeared to act as chain transfer agents and oligomers with DP_n between 2 and 6 were indeed obtained when 2-propanol was the solvent. Also, thorough oxygen removal from the reaction mixture proved to be essential for the success of the experiment, plain nitrogen sparging being ineffective in most cases.     

Novel approaches to developing carbon nanotube based polymer composites: fundamental studies and nanotech applications

The adsorption of several types of conducting polymers on carbon nanotubes is investigated by electrical transport measurements. We report the optoelectronic properties occurring in single-walled carbon nanotubes (SWNTs) conjugated polymer, poly(3-octylthiophene), composites. Al/polymer-nanotube composite/indium-tin oxide diodes show photovoltaic behavior proposing that the main reason for this increase is the photoinduced electron transfer at the polymer/nanotube interface. Interesting results were obtained in the case of poly(o-anisidine) (POAS)-multi-walled nanotubes (MWNTs) composites where the increment of monolayers results in a significant improvement of the specific conductivity. POAS-coated MWNTs thin films demonstrated their potentiality as a new class of materials for inorganic vapors detection for environmental applications.     

Experimental methods in chemical engineering: X-ray absorption spectroscopy—XAS,XANES, EXAFS

Although X-ray absorption spectroscopy (XAS) was conceived in the early 20th century, it took 60 years after the advent of synchrotrons for researchers to exploit its tremendous potential. Counterintuitively, researchers are now developing bench type polychromatic X-ray sources that are less brilliant to measure catalyst stability and work with toxic substances. XAS measures the absorption spectra of electrons that X-rays eject from the tightly bound core electrons to the continuum. The spectrum from 10 to 150 eV (kinetic energy of the photoelectrons) above the chemical potential—binding energy of core electrons—identifies oxidation state and band occupancy (X-ray absorption near edge structure, XANES), while higher energies in the spectrum relate to local atomic structure like coordination number and distance, Debye-Waller factor, and inner potential correction (extended X-ray absorption fine structure, EXAFS). Combining XAS with complementary spectroscopic techniques like Raman, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) elucidates the nature of the chemical bonds at the catalyst surface to better understand reaction mechanisms and intermediates. Because synchrotrons continue to be the light source of choice for most researchers, the number of articles Web of Science indexes per year has grown from 1000 in 1991 to 1700 in 2020. Material scientists and physical chemists publish an order of magnitude articles more than chemical engineers. Based on a bibliometric analysis, the research comprises five clusters centred around: electronic and optical properties, oxidation and hydrogenation catalysis, complementary analytical techniques like FTIR, nanoparticles and electrocatalysis, and iron, metals, and complexes.     

我国典型城市氢能经济性和低成本氢源探索分析

氢能经济性一直是氢能与燃料电池汽车产业发展关注的重点。本文构建了一种简洁、有效的加氢站氢气成本计算模型,可适用于现阶段已投入运行的加氢站经济性研究计算。应用该成本计算模型,通过实地调研,本文得到了张家口、郑州、盐城、佛山等地典型加氢站的氢气成本,经对比分析可知,由于氢气来源、储运距离、应用端市场规模等现实条件不同,加氢站的氢能经济性具有很大差异。为进一步提升氢能经济性、探索加氢站氢气成本低于40CNY/kg的可行性,本文以张家口市氢气来源于风电电解水制氢的某加氢站为例,详细分析其氢气成本构成情况,得出低成本氢源开发对于降低加氢站氢气成本具有重要意义。本文还根据氢能产业发展现状和在交通领域的应用前景,从降低氢气制取成本、氢气储运成本、加氢站固定资产折旧及运营成本等方面为进一步提升氢能经济性、降低加氢站氢气成本提出建议。