Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

A wind park reduced-order model using singular perturbations theory

Due to the increasing penetration of wind energy, it is necessary to possess design tools that are able to simulate the impact of these installations on electric utility grids. In order to provide a net contribution to this issue, a detailed wind park model has been developed and is briefly presented. However, the computational costs associated with the performance of such a detailed model in describing the behavior of a wind park composed by a considerable number of units may render its practical application very difficult. To overcome this problem, singular perturbations theory has been applied to reduce the order of the detailed wind park model, and therefore create the conditions for the development of a dynamic equivalent which is able to retain the relevant dynamics with respect to the existing AC power system. Validation results proving the ability of singular perturbations reduced order model to match the results provided by the detailed model are shown and commented upon     

Avoiding crevice corrosion by laser surface treatment

The present work shows that laser surface alloying of the creviced area on Al 7175-T7351 with chromium can avoid crevice corrosion. Corrosion takes places outside the crevice in conditions where the ratio of anodic area to cathodic area is favourable to minimize corrosion. As laser surface processing is adequate for treating small areas there is an enormous potential in this technology.     

Muon spin relaxation study of amorphous Hf2Co

Muon spin relaxation measurements were carried out in zero magnetic field on amorphous Hf₂Co. The results obtained and comparison with the behaviour of the muon in crystalline Hf₂Co (A. Baudry, P. Boyer, L.P. Ferreira, S.W. Harris, S. Miraglia and L. Pontonnier, J. Phys.: Condens. Matter, 4 (1992) 5025) indicate that muons occupy interstitial sites without Co atoms in first-neighbour positions and diffuse through those sites, suggesting the existence of some degree of short-range order in the amorphous structure. Muon diffusion cannot be described by a single thermally activated process and is faster in the amorphous alloy than in the crystalline alloy.     

Fatigue behaviour of a phenolic matrix composite

This paper presents results of a fatigue life investigations carried out in plate specimens of a fibre-glass-reinforced phenolic matrix composite. Tensile and Young's modulus data were obtained at four different testing temperatures (room temperature, 100, 150 and 200 °C). The fatigue S−N data were obtained at room temperature only and for two stress ratio values (R=0 and 0.4). Fatigue and tensile behaviour was assesesed in the composite with the fibres aligned in the longitudinal loading direction. The results were obtained for two values of volume fraction (0.28 and 0.42) and three different glass surface treatments. A detailed comparison of fatigue results is given taking into account several fatigue parameters and also the testing variables. Results of observations of SEM fracture surfaces are also presented.     

Analysis and Design of Robust Controllers Using the Interval Diophantine Equation

In this paper the design of pole placement feedback controllers for interval plants is addressed within an Interval Analysis framework. Three main topics connected by the concept of interval Diophantine equation are treated: a relatively straightforward investigation about robust coprimeness of interval polynomials, a reliable computing approach for the design of pole placement controllers in the presence of inaccuracies of interval type, and the design of robust controllers with regional pole placement specifications. After explicitly characterizing a convex subset of robust controllers, the problem of designing non-fragile controllers is formulated as a design centering problem, which is then solved by a global optimization algorithm. Numerical examples illustrate the main characteristics of the approach proposed.This paper has been partially supported by grants from Conselho Nacional de Desenvolvimento Científico e Tecnológico–Brazil.     

Computationally efficient methods for bit-error rate evaluation inweakly coherent optical systems

A semianalytical method to estimate the bit-error rate performance of nonsynchronous ASK and FSK optical heterodyne systems is presented. This approach takes into account numerous system details with an accuracy similar to Monte-Carlo simulation, but with a computation time reduced by several orders of magnitude. An analytical approximation, based on a closed-form expression for the decision variable moment generating function, is also presented. The results obtained with the semianalytical method and the analytical approximation are compared to Monte-Carlo simulation results and to measurements obtained on a practical FSK system     

Screening of supports for the immobilization of pectinmethylesterase from acerola (Malpighia glabra L)

A partially purified extract of pectinmethylesterase (PME) from acerola fruit was immobilized on various supports: glass, celite, chrysotile, agarose, concanavalin A Sepharose 4B, egg shell, polyacrylamide and gelatin. In addition, reticulation with glutaraldehyde was assessed, as well as the use of gelatin in the presence of celite, glass and silica. The highest immobilization yields were obtained when the pectinmethylesterase was immobilized in concanavalin A Sepharose 4B (81.7%) and in gelatin‐water (78.0%). Copyright © 2004 Society of Chemical Industry