Topology optimization of continuum structures subjected to uncertainties in material properties

This work addresses the use of the topology optimization approach to the design of robust continuum structures under the hypothesis of uncertainties with known second‐order statistics. To this end, the second‐order perturbation approach is used to model the response of the structure, and the midpoint discretization technique is used to discretize the random field. The objective function is a weighted sum of the expected compliance and its standard deviation. The optimization problem is solved using a traditional optimality criteria method. It is shown that the correlation length plays an important role in the obtained topology and statistical moments when only the minimization of the standard deviation is considered, resulting in more and thinner reinforcements as the correlation length decreases. It is also shown that the minimization of the expected value is close to the minimization of the deterministic compliance for small variations of Young's modulus. Copyright © 2016 John Wiley & Sons, Ltd.     

Structural damage identification via time domain response and Markov Chain Monte Carlo method

The present work addresses the problem of structural damage identification built on the statistical inversion approach. Here, the damage state of the structure is continuously described by a cohesion parameter, which is spatially discretized by the finite element method. The inverse problem of damage identification is then posed as the determination of the posterior probability densities of the nodal cohesion parameters. The Markov Chain Monte Carlo method, implemented with the Metropolis–Hastings algorithm, is considered in order to approximate the posterior probabilities by drawing samples from the desired joint posterior probability density function. With this approach, prior information on the sought parameters can be used and the uncertainty concerning the known values of the material properties can be quantified in the estimation of the cohesion parameters. The assessment of the proposed approach has been performed by means of numerical simulations on a simply supported Euler–Bernoulli beam. The damage identification and assessment are performed considering time domain response data. Different damage scenarios and noise levels were addressed, demonstrating the feasibility of the proposed approach.     

Coupled temperature and moisture effects on the tensile behavior of strain hardening cementitious composites (SHCC) reinforced with PVA fibers

This paper reports the experimental findings on the tensile behavior of strain-hardening cement-based composites (SHCC). The composites were subjected to the combined effects of elevated temperatures and internal moisture condition. Uniaxial tensile tests on dumbbell-shaped SHCC specimens with in situ temperature control were performed at 22, 60 and 100 °C. In addition, the effect of the internal humidity of SHCC (95, 50, 20 and 0%) coupled to the elevated temperatures was investigated. It was shown that the tensile strength decreases and the strain capacity increases with an increase in temperature. The influence of the internal moisture conditions was more significant in high temperatures. The strain capacity reduced significantly with a decrease in the humidity level. The crack pattern of the SHCC specimens was determined. Furthermore, single fiber pullout tests were performed under the considered high temperatures condition. Finally, the results are discussed based on the thermogravimetry analysis of the PVA fiber, alterations on its microstructure and surface coating.     

Bulk mass flow in a vibratory finisher: mechanisms and effect of process parameters

Vibratory finishing is a widely-used manufacturing process in which a vibrating container filled with granular media becomes fluidized. The resulting bulk flow entrains workpieces and exposes their surfaces to the impacts resulting from the small-scale media vibrations. The bulk flow is responsible for entrainment and mixing, while the media vibration does work on the surfaces. The selection of machine vibration parameters is commonly based on experience due to the difficulty in predicting the fluidized bed behavior. In this work, a discrete element method was used to investigate how the bulk flow in an actual tub finisher filled with steel balls depends on the tub motion parameters through a parametric study. The underlying mechanisms that create and drive the bulk flow were identified by examining the relationships between the bulk flow rates and the wall forces. Finally, the connection between the wall motion and the wall forces was investigated. The tub frequency was the most effective control parameter and there was an optimal phase difference between the horizontal and vertical vibrations to maximize bulk flow. The relationship between the media packing at the walls and the tangential forces between the walls and the media explained the formation and speed of the bulk flow. Lastly, it was shown that the tangential wall forces, unlike the normal forces, cannot be obtained from the known wall motion alone since they also depend on the media velocities relative to the walls.     

Influence of process parameters on average particle speeds in a vibratory finisher

Vibratory finishing (VF) employs vibrationally-fluidized granular media to finish the surfaces of workpieces that are entrained in the flowing media. Its application has been based mostly on experience and trial-and-error due to the complexity of the granular material behavior. The present study used discrete element modeling (DEM) to investigate how the movement of a commercial two-dimensional tub finisher influenced the average particle speed of the media in a bed of smooth, steel, spherical particles, and thus the work that would be done on an entrained workpiece. The parameters governing the tub wall motion (frequency, in-plane amplitudes, and phases of vibration) and the coefficient of friction between the media and the wall were systematically varied in 71 three-dimensional DEM simulations. The average particle speed was affected mostly by the vertical amplitude of tub motion rather than by the frequency, and was mostly independent of other parameters of motion and of the wall friction. A strong relationship was found between the average particle speed and the work done by the wall per cycle of vibration. The normal force on the wall was also found to correlate strongly with the normal component of the wall velocity. Together, these relationships offer the potential to enable the analytical prediction of the average particle speed based on the motion parameters of the tub alone. The paper provides a set of practical guidelines for the control of the average particle speed in VF that are explained by the forces between the media and walls of the tub finisher.     

Is floating photovoltaic better than conventional photovoltaic? Assessing environmental impacts

Photovoltaic (PV) solar energy installations are growing all over the world as a promising renewable alternative to generate electricity. However, many studies have highlighted some drawbacks associated with the installation and operation of conventional solar energy power plants. Thus, floating photovoltaic (FPV) systems have been emerging as a new concept in solar energy to lessen negative environmental impacts caused by allocation of conventional PV facilities. This paper is an overview of the potential negative and positive environmental impacts caused by photovoltaic systems with particular interest on large-scale conventional and floating photovoltaic. This study addresses and compares the impacts at all phases of project implementation, which covers planning, construction, and operation and decommissioning, focusing on ambient located in the tropics. The overall impacts associated with project allocation such as deforestation (for the project implementation and site accessing), bird mortality, erosion, runoff, and change in microclimate are expected to have higher magnitudes for the implementation of conventional PV facilities. The results highlight advantages of FPV over conventional PV during the operational and decommissioning phases as well. Though, further studies are required to assess both qualitative and quantitative aspects of installations in similar areas.     

Semantic fusion of laser and vision in pedestrian detection

Fusion of laser and vision in object detection has been accomplished by two main approaches: (1) independent integration of sensor-driven features or sensor-driven classifiers, or (2) a region of interest (ROI) is found by laser segmentation and an image classifier is used to name the projected ROI. Here, we propose a novel fusion approach based on semantic information, and embodied on many levels. Sensor fusion is based on spatial relationship of parts-based classifiers, being performed via a Markov logic network. The proposed system deals with partial segments, it is able to recover depth information even if the laser fails, and the integration is modeled through contextual information—characteristics not found on previous approaches. Experiments in pedestrian detection demonstrate the effectiveness of our method over data sets gathered in urban scenarios.     

Spatial and temporal variability of macrophyte cover and productivity in the eastern Amazon floodplain: A remote sensing approach

Herbaceous aquatic macrophytes cover extensive areas on the floodplains of the Amazon basin and are an important habitat and input of organic carbon. These communities have large intra- and inter-annual variability, and characterization of this variability is necessary to quantify the role of macrophytes in the ecology and biogeochemistry of the floodplain. A novel approach for mapping the temporal evolution of aquatic vegetation in the Amazon floodplain, which could be adapted to other spatially and temporally changing environments, is presented. Macrophyte cover varied seasonally and inter-annually, ranging between 104 and 198 km² for the floodplain examined (total area, 984 km²). The observed evolution of plant distribution indicated a spatial and temporal partition of macrophyte communities into short-lived and annual groups. A simulation of macrophyte net primary production (NPP) based on the mapping results indicated that at least 3% of NPP could be attributed to the short-lived communities. The present results suggest that significant changes in the macrophyte's contribution to carbon cycling in the Amazon floodplain could occur as a result of the predicted increase in frequency of drought years for the Amazon system due to climate change.