Relation between erythrocyte free protoporphyrins and usual iron intake in a group of University of Buenos Aires students

In order to analyze the interrelationships between free erythrocyte protoporphyrins and the usual iron intake in adult students, biochemical, and hematological values, and dietary daily intake, obtained using the recall method during seven days, were studied. Hematocrit (Hto.), hemoglobin (Hb) and free erythrocyte protoporphyrins (FEP) were determined in a group of 145 female university students, healthy according to the standard parameters of the Buenos Aires University Health Department. Mean iron intake was 23.0 +/- 1.5 mg per day, about 44% being provided by animal sources; 74.5% of the population was within the recommended daily intake according to FAO/WHO; only 0.7% of the population did not cover protein requirements while 35% did not cover energy needs. Hto. and Hb were below normal levels in 7.8% of the population when compared with standards according to ICNND. To obtain information about normal values to FEP, expressed as microgram/100 ml red cells (FEP% r.c.) and FEP/Hb ratio, the group of students with adequate intake of energy and proteins who had normal values for Hb and Hto. was selected. This group, including 94 women, had a mean FEP% r.c. of 15.71 +/- 7.26 and a mean FEP/Hb ratio of 0.44 +/- 0.21. There was observed an inverse correlation between FEP% r.c. and FEP/Hb with total iron intake (r = 0.80 and r = 0.78, respectively) and between FEP% r.c. and Hb concentration (r = 0.81). These results confirm the usefulness of the free erythrocyte protoporphyrins determination as a good index of iron stores and usual intake of this population.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.     

The potentiometric behaviour of copolymers of methacrylic acid in water-ethanol solutions

Summary The synthesis is reported of copolymers of styrene with methacrylic acid and of methyl methacrylate with methacrylic acid by radical copolymerization, of copolymers of methyl methacrylate with methacrylic acid by partial alkaline hydrolysis of poly(methyl methacrylate), and of block copolymers of styrene with methacrylic acid. Modified titration curves of all these copolymers were recorded in water and water-ethanol solutions. In a solution containing 50 mass.% ethanol, only small differences could be observed between the potentiometric behaviour of the individual copolymers and polymethacrylic acid. Also, there were no essential differences in any of the solvents used between the potentiometric behaviour of block copolymers of styrene with methacrylic acid, on the one hand, and polymethacrylic acid, on the other. On the contrary, maxima and minima were always observed on the modified titration curves of statistical copolymers with a higher content of the hydrophobic comonomer in solutions with a high water content. Thus, using the modified titration curves, it is possible to decide whether a given copolymer is of the block or statistical type.     

A contribution to the UV degradation of polyurethanes

The effects of the nature of the polyols used in polyurethane (PUR) synthesis on the structural transformations after ageing by UV irradiation has been studied. The investigations were performed on PUR prepared from polyester and polyether diol oligomers. The characterization of the samples before and after ageing in view of the structural changes, which influence the course of the photooxidative degradation and photocrosslinking as well as in view of changes of mechanical properties has been done. Comparative investigations were performed by spectroscopic and viscometric measurements. The results show pronounced heterogeneity of the degradative reactions, including the existence of crosslinking processes and producing thus very inhomogeneous polymeric material. The course and the intensity of photooxidative degradation of PUR differ together with changes of mechanical properties depending whether polyester or polyether polyol have been used. The processes of photooxidative degradation is less expressed in polyesterurethane then in polyurethane based on polyether, under the same conditions of experiments. Different structures of polyester diols caused the various ageing behaviour of PUR too.     

Universal variable length coding for an integrated approach to image coding

We propose a new entropy coding scheme, denoted in this paper as the UVLC (universal variable length coding). It is universal in the sense that its efficiency is close to one for a large class of images. The UVLC, when it is applied to block orthogonal transforms, processes groups of blocks at the bit level, using universal codes designed for binary memoryless sources. It can be used for every video coding application, from high definition TV (HDTV) to high quality videotelephony (above 2 Mbit/s) for transform or subband coding. Last but not least, its implementation is very regular and can be realized in a single chip for the encoding oftv at theccir 601 format.     

Photoacoustic technique for simultaneous measurements of thermal effusivity and absorptivity of pigments in liquid solution

A photoacoustic (PA) methodology, in the transmission configuration, for simultaneous measurements of thermal effusivity and molar absorption coefficient (absorptivity) for pigments in liquid solution is introduced. The analytical treatment involves a self-normalization procedure for the PA signal, as a function of the modulation frequency, for a strong absorbing material in the thermally thin regime, when the light travels across the sample under study. Two fitted parameters are obtained from the analysis of the self-normalized PA amplitude and phase, one of them proportional to the sample's optical absorption coefficient and from which, taking it for a series of samples at different concentrations, the pigment's absorptivity in liquid solution can be measured, the other one yields the sample's thermal effusivity. Methylene blue's absorptivity in distilled water was measured with this methodology at 658 nm, finding good agreement with the corresponding one reported in the literature.     

Efficient wavelet-based ECG processing for single-lead FHR extraction

This paper describes a novel model for fetal heart rate (FHR) monitoring from single-lead mother?s abdomen ECG (AECG) measurements. This novel method is divided in two stages: the first step consists on a one-step wavelet-based preprocessing for simultaneous baseline and high-frequency noise suppression, while the second stage efficiently detects fetal QRS complexes allowing FHR monitoring. The presented structure has been simplified as much as possible, in order to reduce computational cost and thus enable possible custom hardware implementations. Moreover, the proposed scheme and its fixed-point modeling have been tested using real abdominal ECG signals, which allow the validation of the presented approach and provide high accuracy.     

蓝牙和IEEE802.11无线局域网共存问题探析

使用WiFi(Wireless Fidelity)IEEE 802.11b/g协议的无线局域网(WLAN)技术已经成为PC和笔记本电脑的标准而正在快速扩散到PDA(Personal Digital Assistant)和其它便携式设备。与此同时,蓝牙作为耳机,麦克风连到各种个样的无线设备的串口线的替代品已经越来越普遍。这两种无线协议都工作于2.40至2.48GHzISM(工业,科学和医疗)射频带。WiFi使用12个带宽为22MHz重叠的频道其中一个,而蓝在带宽为79MHz范围跳频[3]。因此,无论WiFi正在使用哪个频道两个系统间会存在互相干扰和共存的问题导致数据吞吐量的降低。实现IEEE802.11 WLAN协议的设使用FEC(Foward Error Correction)纠错技术来减轻于其它无线网的干扰。在该文中,我们将对RS(Reed Solomon)编码与BS(Binary Convolutional)编码使用于解决WLAN于BT共存问题的相对有效性进行一个调查并作出结论。