Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements

In order to couple the damage evolution and the stress state of DP steel grades, a new advanced GTN (Gurson-Tvergaard-Needleman) model was developed and implemented into a finite element code. This model is an extension of the original one. It takes into account the plastic anisotropy and the mixed (isotropic + kinematic) hardening of the matrix. Two different methods to compute the void volume fraction were developed and used within the constitutive equations. The first method is new and allows the accurate modeling of the observations of damage initiation and growth in DP steels measured using high-resolution X-ray absorption tomography ( [Bouaziz et al., 2008] and [Maire et al., 2008]). The second method is classic and assumes the additive decomposition of the total void volume fraction into a nucleation and a growth part. A parametric study is carried out to assess the effect of the kinematic hardening on some mechanical parameters such as the equivalent plastic strain, the triaxiality and the porosity. The numerical predictions are favorably compared to the experimental results.     

Comparison of Kayzero for Windows and k0-IAEA software packages for k0 standardization in neutron activation analysis

For many years the well-established Kayzero for Windows software for neutron activation analysis (NAA) using k₀ standardization was the only commercial program available. Recently, the freeware k0-IAEA software has been launched by the International Atomic Energy Agency (IAEA). The software is based on an adapted Høgdahl convention in which the cadmium cut-off energy from the k₀-formulas is removed. The holistic approach of γ-ray spectra evaluation is used which minimizes the user's interaction with the software.Several certified reference materials were analyzed with the k0-IAEA and Kayzero for Windows software using the same gamma-ray spectra obtained from several irradiation and counting modes. The results obtained were compared and evaluated in terms of precision, accuracy and detection limits. The work-flow procedures performed by the two software packages and the results obtained are discussed.     

Strategies in environmental education

The causes of environmental changes, including climate, are neither fully understood nor identified, nor do scientists agree about their nature. Yet, their impact is such that action cannot be delayed. This involves spreading public awareness through environmental education and sensitization. Hence a need to reach, to educate the poorly informed public at large. With the classroom as the base, “town meetings” and eco‐tourism may constitute potentially useful approaches towards that goal.     

An assessment of briefs used for designing healthcare environments: a survey in Sweden

The brief is a central document in decision-making during the early stages of the planning and construction (briefing/programming) of healthcare environments. Thus, the demand on the content and quality of these documents is high. The content and quality of initial briefs developed in Sweden were assessed to obtain an up-to-date picture of current practices of writing project statements in the early stages of designing healthcare environments. A new instrument called the Content and Quality of Brief Instrument (CQB-I) was used to study 29 initial briefs. In many cases, the documentation in the briefs was incomplete and the information did not adequately address users’ needs. In addition, the briefs often did not include any measurable outcomes or explicitly evidence-based information. These findings have implications for identifying areas for improvement in design teams’ documentation practices. Assessment can have a real impact on the quality of briefs and can raise awareness of the need to improve the briefing process itself. This is one of the first studies to assess the content and quality of briefs and it provides a starting point for both practitioners and future researchers to explore the role of briefs in briefing process quality improvement.     

A methodology to determine the elastic properties of anisotropic rocks from a single uniaxial compression test

This paper introduces a new methodology to measure the elastic constants of transversely isotropic rocks from a single uniaxial compression test. We first give the mathematical proof that a uniaxial compression test provides only four independent strain equations. As a result, the exact determination of all five independent elastic constants from only one test is not possible. An approximate determination of the Young's moduli and the Poisson's ratios is however practical and efficient when adding the Saint–Venant relation as the fifth equation. Explicit formulae are then developed to calculate both secant and tangent definitions of the five elastic constants from a minimum of four strain measurements. The results of this new methodology applied on three granitic samples demonstrate a significant stress-induced nonlinear behavior, where the tangent moduli increase by a factor of three to four when the rock is loaded up to 20 MPa. The static elastic constants obtained from the uniaxial compression test are also found to be significantly smaller than the dynamic ones obtained from the ultrasonic measurements.     

1,2,3-Triazolium-based poly(acrylate ionic liquid)s

Nitroxide-mediated radical polymerization of a tailor-made acrylate carrying a 1,2,3-triazole group with an undecanoyl spacer affords a well-defined (M_n = 7860 g mol⁻¹ and D = 1.39) neutral polyacrylate precursor. A series of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) is then obtained by straightforward quaternization of the 1,2,3-triazole groups with methyl iodide and subsequent anion metathesis reactions. Among the prepared materials, TPIL with bis(trifluoromethane)sulfonimide anion exhibits low glass transition temperature (T_g = −40 °C), high thermal stability (T_d10 = 325 °C) and anhydrous ionic conductivity of 4 × 10⁻⁶ S cm⁻¹ at 30 °C, as measured by differential scanning calorimetry, thermogravimetric analysis and broadband dielectric spectroscopy, respectively.     

Impact of the Cd2+ treatment on the electrical properties of Cu2ZnSnSe4 and Cu(In,Ga)Se2 solar cells

The present contribution aims at determining the impact of modifying the properties of the absorber/buffer layer interface on the electrical performance of Cu₂ZnSnSe₄ (CZTSe) thin‐film solar cells, by using a Cd²⁺ partial electrolyte (Cd PE) treatment of the absorber before the buffer layer deposition. In this work, CZTSe/CdS solar cells with and without Cd PE treatment were compared with their respective Cu(In,Ga)Se₂ (CIGSe)/CdS references. The Cd PE treatment was performed in a chemical bath for 7 min at 70 °C using a basic solution of cadmium acetate. X‐ray photoemission spectroscopy measurements have revealed the presence of Cd at the absorber surface after the treatment. The solar cells were characterized using current density–voltage (J–V), external quantum efficiency, and drive‐level capacitance profiling measurements. For the CZTSe‐based devices, the fill factor increased from 57.7% to 64.0% when using the Cd PE treatment, leading to the improvement of the efficiency (η) from 8.3% to 9.0% for the best solar cells. Similar observations were made on the CIGSe solar cell reference. This effect comes from a considerable reduction of the series resistance (R_S) of the dark and light J–V, as determined using the one‐diode model. The crossover effect between dark and light J–V curves is also significantly reduced by Cd PE treatment. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel 1,3,5-Triazinyl Aminobenzenesulfonamides Incorporating Aminoalcohol,Aminochalcone and Aminostilbene Structural Motifs as Potent Anti-VRE Agents,and Carbonic Anhydrases I,II, VII,IX, and XII Inhibitors

A series of 1,3,5-triazinyl aminobenzenesulfonamides substituted by aminoalcohol, aminostilbene, and aminochalcone structural motifs was synthesized as potential human carbonic anhydrase (hCA) inhibitors. The compounds were evaluated on their inhibition of tumor-associated hCA IX and hCA XII, hCA VII isoenzyme present in the brain, and physiologically important hCA I and hCA II. While the test compounds had only a negligible effect on physiologically important isoenzymes, many of the studied compounds significantly affected the hCA IX isoenzyme. Several compounds showed activity against hCA XII; (E)-4-{2-[(4-[(2,3-dihydroxypropyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (31) and (E)-4-{2-[(4-[(4-hydroxyphenyl)amino]-6-[(4-styrylphenyl)amino]-1,3,5-triazin-2-yl)amino]ethyl}benzenesulfonamide (32) were the most effective inhibitors with K_Is = 4.4 and 5.9 nM, respectively. In addition, the compounds were tested against vancomycin-resistant Enterococcus faecalis (VRE) isolates. (E)-4-[2-({4-[(4-cinnamoylphenyl)amino]-6-[(4-hydroxyphenyl)amino]-1,3,5-triazin-2-yl}amino)ethyl]benzenesulfonamide (21) (MIC = 26.33 µM) and derivative 32 (MIC range 13.80–55.20 µM) demonstrated the highest activity against all tested strains. The most active compounds were evaluated for their cytotoxicity against the Human Colorectal Tumor Cell Line (HCT116 p53 +/+). Only 4,4’-[(6-chloro-1,3,5-triazin-2,4-diyl)bis(iminomethylene)]dibenzenesulfonamide (7) and compound 32 demonstrated an IC₅₀ of ca. 6.5 μM; otherwise, the other selected derivatives did not show toxicity at concentrations up to 50 µM. The molecular modeling and docking of active compounds into various hCA isoenzymes, including bacterial carbonic anhydrase, specifically α-CA present in VRE, was performed to try to outline a possible mechanism of selective anti-VRE activity.     

Heparin-Functionalized Adsorbents Eliminate Central Effectors of Immunothrombosis,including Platelet Factor 4, High-Mobility Group Box 1 Protein and Histones

Inflammation and thrombosis are closely intertwined in numerous disorders, including ischemic events and sepsis, as well as coronavirus disease 2019 (COVID-19). Thrombotic complications are markers of disease severity in both sepsis and COVID-19 and are associated with multiorgan failure and increased mortality. Immunothrombosis is driven by the complement/tissue factor/neutrophil axis, as well as by activated platelets, which can trigger the release of neutrophil extracellular traps (NETs) and release further effectors of immunothrombosis, including platelet factor 4 (PF4/CXCL4) and high-mobility box 1 protein (HMGB1). Many of the central effectors of deregulated immunothrombosis, including activated platelets and platelet-derived extracellular vesicles (pEVs) expressing PF4, soluble PF4, HMGB1, histones, as well as histone-decorated NETs, are positively charged and thus bind to heparin. Here, we provide evidence that adsorbents functionalized with endpoint-attached heparin efficiently deplete activated platelets, pEVs, PF4, HMGB1 and histones/nucleosomes. We propose that this elimination of central effectors of immunothrombosis, rather than direct binding of pathogens, could be of clinical relevance for mitigating thrombotic complications in sepsis or COVID-19 using heparin-functionalized adsorbents.