Common-Mode Response Overlapping vs. Shaping in Rail-to-Rail Op-Amp Input Stages

In this paper, a circuit technique—common-mode (CM) response overlapping—for maintaining the small-signal behavior of rail-to-rail amplifiers nearly constant over the whole input CM range, is introduced. This technique modifies the CM response of the rail-to-rail input stage adequately by means of two constant input floating voltage sources, which are adjusted by using a static tuning section. Its performance is compared with a second technique—CM response shaping—, which is also based on two variable input floating voltage sources, but relies on a dynamic feedback tuning loop. Experimental results obtained from two 3-V 0.8-m CMOS single-stage rail-to-rail amplifiers, which operate with CM response overlapping and shaping, respectively, are provided.     

Intratumoral Thermal Reading During Photo‐Thermal Therapy by Multifunctional Fluorescent Nanoparticles

The tremendous development of nanotechnology is bringing us closer to the dream of clinical application of nanoparticles in photothermal therapies of tumors. This requires the use of specific nanoparticles that must be highly biocompatible, efficient light‐to‐heat converters and fluorescent markers. Temperature reading by the heating nanoparticles during therapy appears of paramount importance to keep at a minimum the collateral damage that could arise from undesirable excessive heating. In this work, this thermally controlled therapy is possible by using Nd³⁺ ion‐doped LaF₃ nanocrystals. Because of the particular optical features of Nd³⁺ ions at high doping concentrations, these nanoparticles are capable of in vivo photothermal heating, fluorescent tumor localization and intratumoral thermal sensing. The successful photothermal therapy experiments here presented highlight the importance of controlling therapy parameters based on intratumoral temperature measurements instead of on the traditionally used skin temperature measurements. In fact, significant differences between intratumoral and skin temperatures do exist and could lead to the appearance of excessive collateral damage. These results open a new avenue for the real application of nano­particle‐based photothermal therapy at clinical level.     

A Tutorial on Multiplierless Design of FIR Filters: Algorithms and Architectures

Finite impulse response (FIR) filtering is a ubiquitous operation in digital signal processing systems and is generally implemented in full custom circuits due to high-speed and low-power design requirements. The complexity of an FIR filter is dominated by the multiplication of a large number of filter coefficients by the filter input or its time-shifted versions. Over the years, many high-level synthesis algorithms and filter architectures have been introduced in order to design FIR filters efficiently. This article reviews how constant multiplications can be designed using shifts and adders/subtractors that are maximally shared through a high-level synthesis algorithm based on some optimization criteria. It also presents different forms of FIR filters, namely, direct, transposed, and hybrid and shows how constant multiplications in each filter form can be realized under a shift-adds architecture. More importantly, it explores the impact of the multiplierless realization of each filter form on area, delay, and power dissipation of both custom (ASIC) and reconfigurable (FPGA) circuits by carrying out experiments with different bitwidths of filter input, design libraries, reconfigurable target devices, and optimization criteria in high-level synthesis algorithms.     

MnO2-Based Electrochemical Supercapacitors on Flexible Carbon Substrates

Manganese dioxide films were grown on large area flexible carbon aerogel substrates. Characterization by x-ray diffraction confirmed α-MnO₂ growth. Three types of films were compared as a function of hexamethylenetetramine (HMTA) concentration during growth. The highest concentration of HM TA produced MnO₂ flower-like films, as observed by scanning electron microscopy, whose thickness and surface coverage lead to both a higher specific capacitance and higher series resistance. Specific capacitance was measured to be 64 F/g using a galvanostatic setup, compared to the 47 F/g-specific capacitance of the carbon aerogel substrate. Such supercapacitor devices can be fabricated on large area sheets of carbon aerogel to achieve high total capacitance.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

Multihour engineering and traffic routing optimization in hierarchical telephone networks

Classical hierarchical routing in telephone networks is extended to a wider class called out-of-chain routing in such a way that some useful properties of hierarchical routing are retained. This new routing pattern offers more potential paths than the fixed hierarchical one and can be introduced as a dynamic routing where the fixed alternate sequences change at some predetermined instants during the day. The effect of this new routing pattern on the network performances is examined. The main topic of this paper is to present heuristic methods used to optimise such routings in large networks. We show on artificial networks that the throughput of a given network can be significantly improved by suitable routing choices. We demonstrate that the integration of routing changes within a multihour dimensioning process is possible but the lack of realistic data does not permit at this time to quantify the value of routing optimization on real networks.     

Study of the glucide fraction in ropy wines

Gas chromatography was used to study the polysaccharides present in samples that exhibited significant microbially induced viscosity values. Alterations in the media considered were related to the percentage glucose content and the total polysaccharide content.     

14C labelling of lignins of normal and bm3 maizes for fermentation studies

[U-¹⁴C] phenylalanine (phe*) and [O¹⁴CH₃] sinapic acid (sin*) were infused into the cut ends of normal and bm3 maizes (anthesis stage) under or above the last node or at mid-internode, with or without the leaf, in light or in darkness. Radioactivity was measured in the organs, and in phenolic constituents of the cell wall and saponified residues of the bases and tops of the apical inter-node. In both maize genotype labelled under the node the radioactivity was distributed more evenly in the organs with sin* than with phe*. Infusion above the node and at mid-internode greatly increased radioactivity in the bases and tops, respectively. Removal of the leaf only slightly increased the radioactivity, mainly in the bases, and no clear-cut effect of darkness was observed. Phe* labelled the phenolic acids and the three lignin units, but the syringyl units of bm3 maize were only slightly labelled. Sin* specifically labelled the syringyl units, which represented the least condensed fraction of lignins. Both the native and labelled lignins were highly alkali soluble. There were differences in lignin biogenesis between the bases and tops, and between normal and bm3 maizes. The newly formed lignins were slightly different from the native lignins but had similar types of heterogeneity, with variations in the internode and between genotypes similar to those in native lignins. Provided due allowance is made for the distinguishing characteristics of newly formed lignins, the [¹⁴C-lignin] cell walls, which are strongly labelled on complementary structures, seem suitable model substrates for fermentation studies.