Using electric actuation and detection of oscillations in microcantilevers for pressure measurements

Response characteristics of a microcantilever, such as resonant frequency, amplitude, phase and quality factor, can be used for absolute pressure measurements in the range of 10⁻⁴ to 10³ Torr. To this end, it would be very convenient to have the resonance of the microcantilever actuated and detected electrostatically. Herein, we report the nonlinear dynamics of microcantilevers under varying pressure and different gases using the harmonic detection of resonance (HDR) technique [J. Gaillard, M.J. Skove, R. Ciocan, A.M. Rao, Electrical detection of oscillations in 340 microcantilevers and nanocantilevers, Rev. Sci. Instrum. 77 (2006) 073907]. The HDR technique exploits nonlinearities in the cantilever-counter electrode system to allow electrostatic actuation and detection of the responses of the microcantilever to the pressure and gas composition. In particular, the 2nd and 3rd harmonics of the measured charge on the cantilever are investigated. The microcantilever demonstrates a quality factor of 10,000 at 10⁻³ Torr, and a usable response in the range from 10⁻³ to 10³ Torr. The use of different harmonics can enable us to adjust the range of pressures over which the sensor has an efficacious response, enhancing its sensitivity to a particular environment. The experimental results are in reasonable agreement with theoretical calculations, despite the nonlinearities involved.     

Flaw detection close to the interface using ultrasonic echography

The detection of flaws by ultrasonic echography becomes difficult when the flaw is at a shallow depth. The time delay between the interface and flaw echos is less than the width of the impulse-response time of the transducer, and the flaw echo generally has an amplitude much smaller than the dominating interface echo. When the surface is not too rough, the interface echo can be assumed to be known, and its comparison with the signal interface and flaw echo permits the detection of the flaw. In this article it is shown that signal processing techniques allow small flaws to be detected very close to the surface (0.5 mm). Two methods are proposed, the first one is based on the minimization of the mean-square error, and the second on the spectral substraction of the two echos.This work has been supported by the French Ministry of Defense.     

Assessing the public health risk of microbial intrusion events in distribution systems: conceptual model, available data, and challenges

Low and negative pressure events in drinking water distribution systems have the potential to result in intrusion of pathogenic microorganisms if an external source of contamination is present (e.g., nearby leaking sewer main) and there is a pathway for contaminant entry (e.g., leaks in drinking water main). While the public health risk associated with such events is not well understood, quantitative microbial risk assessment can be used to estimate such risk. A conceptual model is provided and the state of knowledge, current assumptions, and challenges associated with the conceptual model parameters are presented. This review provides a characterization of the causes, magnitudes, durations and frequencies of low/negative pressure events; pathways for pathogen entry; pathogen occurrence in external sources of contamination; volumes of water that may enter through the different pathways; fate and transport of pathogens from the pathways of entry to customer taps; pathogen exposure to populations consuming the drinking water; and risk associated with pathogen exposure.     

EPR investigation of compound I in Proteus mirabilis and bovine liver catalases: formation of porphyrin and tyrosyl radical intermediates

Compound I of Proteus mirabilis and bovine liver catalases (PMC and BLC, respectively) were studied combining EPR spectroscopy and the rapid-mix freeze-quench techniques. Both enzymes, when treated with peroxyacetic acid, form a catalytic intermediate which consists of an oxoferryl porphyrin pi-cation radical. In PMC this intermediate is semistable, and an unexpected reversible equilibrium under pH influence takes place between two forms of compound I with different coupling between the oxoferryl and the porphyrin pi-cation radical. At acid pH, one form has a ferromagnetic character as in Micrococcus luteus compound I. At neutral pH, another form with a much smaller coupling, reminiscent of the horse radish peroxidase compound I, is detected. The approximate midpoint, estimated for these changes in the range 5.3 < pH < 6.0, approaches the pKa value of an histidyl residue. The residues possibly involved in the transformation are discussed in terms of the known structure of PMC compound I. The EPR spectrum of BLC compound I (pH 5.6), obtained in the millisecond time scale (40 ms), also showed a mixture of two forms which, most probably, correspond to two different magnetic exchange interactions, as in the case of PMC. Taken together, the low-temperature electronic absorption and the EPR spectra of BLC compound I formed in the 0.04-15 s range show that the porphyrin pi-cation radical disappears and, instead, a tyrosyl radical is formed. ENDOR experiments confirm our previously estimated hyperfine couplings to the C2,6 and C3,5 ring protons and the beta-methylene protons of the purported tyrosyl radical. Candidates for such a tyrosyl radical are discussed in connection with the possible electron transfer pathways between the heme active site and the NADPH cofactor.     

Simultaneous optical measurement of Germanium content and Boron doping in strained heteroepitaxial SiGe films using a novel data-analysis technique

We present here a novel technique, based on a proprietary approach for analyzing raw optical data, which is able to decouple the effects of Ge and B on the optical properties of a B-doped SiGe film and so measure the two material fractions, and the thickness, simultaneously and independently on a standard Opti-Probe^® film-thickness tool.Two sets of doped epitaxial SiGe layers were grown, each with a nominally fixed Ge-content but with the boron levels varying from zero to 1×10²⁰ cm⁻³. One set consisted of single-layer films on c-Si substrates, and the other consisted of similar films capped with undoped epi-Si layers.In each case, the Ge-fraction found was in good agreement with expectation (and, in the case of the undoped sample, with XRD), whilst the calculated “doping parameter” was found to follow a monotonic relationship with changes in Boron concentration.     

On calculating sterility in thermal preservation methods: application of the Weibull frequency distribution model

A simple and parsimonious model which originated from the Weibull frequency distribution was proposed to describe nonlinear survival curves of spores. This model was suitable for downward concavity curves (Bacillus cereus and Bacillus pumilus), as well as for upward concavity curves (Clostridium botulinum). It was shown that traditional F values calculated from this new model were no longer additive, to such an extent that a heat treatment should be better characterized by the obtained decimal reduction of spores. A modified Bigelow method was then proposed to assess this decade reduction or to optimize the heat treatment for a target reduction ratio.