Marginal adaptation of composite resins under two adhesive techniques

In the present research, different adhesive techniques were used to set up fillings with composite resins. After the application of etch and rinse or self etch adhesive technique, marginal adaptation of composite fillings was estimated by the length of margins without gaps, and by the microretention of resin in enamel and dentin. The study material consisted of 40 extracted teeth. Twenty Class V cavities were treated with 35% phosphorous acid and restored after rinsing by Adper Single Bond 2 and Filtek Ultimate‐ASB/FU 3M ESPE composite system. The remaining 20 cavities were restored by Adper Easy One‐AEO/FU 3M ESPE composite system. Marginal adaptation of composite fillings was examined using a scanning electron microscope (SEM). The etch and rinse adhesive technique showed a significantly higher percentage of margin length without gaps (in enamel: 92.5%, in dentin: 57.3%), compared with the self‐etch technique with lower percentage of margin length without gaps, in enamel 70.4% (p < .001), and in dentin‐22.6% (p < .05). In the first technique, microretention was composed of adhesive and hybrid layers as well as resin tugs in interprismatic spaces of enamel, while the dentin microretention was composed of adhesive and hybrid layers with resin tugs in dentin canals. In the second technique, resin tugs were rarely seen and a microgap was dominant along the border of restoration margins. The SEM analysis showed a better marginal adaptation of composite resin to enamel and dentin with better microretention when the etch and rinse adhesive procedure was applied.     

Algorithm for blinds control based on the optimization of blind tilt angle using a genetic algorithm and fuzzy logic

This paper presents the calculation of the power of solar rays that pass through the window of an observed room and their impact on warming up and lighting of the room. The calculations were performed using a mathematical model that takes into account the geographical position of the object, time zone, orientation of windows, day of the year, and current time. This paper also includes the calculation of geometry of the solar radiation and its intensity, artificial light and cooling/heating demands. Based on data from above, the optimization of blind tilt angle was performed to achieve the best possible brightness of the room and energy savings when heating or cooling, depending on ambient temperature. Optimization was performed using a genetic algorithm and fuzzy logic. After an analysis of the results obtained from optimization of the blind tilt angle, an algorithm for blinds control was developed in order to achieve energy savings and comfort in the observed room. Based on the derived conclusions, an UML diagram was made that describes the algorithm for determining optimal blind tilt angle.     

Transmittance Measurements in Non-alternating Magnetic Field as Reliable Method for Determining of Heating Properties of Phosphate and Phosphonate Coated Fe3O4 Magnetic Nanoparticles

Different phosphates and phosphonates have shown excellent coating ability toward magnetic nanoparticles, improving their stability and biocompatibility which enables their biomedical application. The magnetic hyperthermia efficiency of phosphates (IDP and IHP) and phosphonates (MDP and HEDP) coated Fe₃O₄ magnetic nanoparticles (MNPs) were evaluated in an alternating magnetic field. For a deeper understanding of hyperthermia, the behavior of investigated MNPs in the non-alternating magnetic field was monitored by measuring the transparency of the sample. To investigate their theranostic potential coated Fe₃O₄-MNPs were radiolabeled with radionuclide ¹⁷⁷Lu. Phosphate coated MNPs were radiolabeled in high radiolabeling yield (>?99%) while phosphonate coated MNPs reached maximum radiolabeling yield of 78%. Regardless lower radiolabeling yield both radiolabeled phosphonate MNPs may be further purified reaching radiochemical purity of more than 95%. In vitro stabile radiolabeled nanoparticles in saline and HSA were obtained. The high heating ability of phosphates and phosphonates coated MNPs as sine qua non for efficient in vivo hyperthermia treatment and satisfactory radiolabeling yield justifies their further research in order to develop new theranostic agents.

     

Lipids and Antiplatelet Therapy: Important Considerations and Future Perspectives

Lipids play an essential role in platelet functions. It is known that polyunsaturated fatty acids play a role in increasing platelet reactivity and that the prothrombotic phenotype plays a crucial role in the occurrence of major adverse cardiovascular events. The ongoing increase in cardiovascular diseases’ incidence emphasizes the importance of research linking lipids and platelet function. In particular, the rebound phenomenon that accompanies discontinuation of clopidogrel in patients receiving dual antiplatelet therapy has been associated with changes in the lipid profile. Our many years of research underline the importance of reduced HDL values for the risk of such a rebound effect and the occurrence of thromboembolic events. Lipids are otherwise a heterogeneous group of molecules, and their signaling molecules are not deposited but formed “on-demand” in the cell. On the other hand, exosomes transmit lipid signals between cells, and the profile of such changes can be monitored by lipidomics. Changes in the lipid profile are organ-specific and may indicate new drug action targets.     

Targeting Mitochondria in Diabetes

Type 2 diabetes (T2D), one of the most prevalent noncommunicable diseases, is often preceded by insulin resistance (IR), which underlies the inability of tissues to respond to insulin and leads to disturbed metabolic homeostasis. Mitochondria, as a central player in the cellular energy metabolism, are involved in the mechanisms of IR and T2D. Mitochondrial function is affected by insulin resistance in different tissues, among which skeletal muscle and liver have the highest impact on whole-body glucose homeostasis. This review focuses on human studies that assess mitochondrial function in liver, muscle and blood cells in the context of T2D. Furthermore, different interventions targeting mitochondria in IR and T2D are listed, with a selection of studies using respirometry as a measure of mitochondrial function, for better data comparison. Altogether, mitochondrial respiratory capacity appears to be a metabolic indicator since it decreases as the disease progresses but increases after lifestyle (exercise) and pharmacological interventions, together with the improvement in metabolic health. Finally, novel therapeutics developed to target mitochondria have potential for a more integrative therapeutic approach, treating both causative and secondary defects of diabetes.     

Stationary and Progressive Phenotypes Caused by the p.G90D Mutation in Rhodopsin Gene

Mutations in rhodopsin gene (RHO) are a frequent cause of retinitis pigmentosa (RP) and less often, congenital stationary night blindness (CSNB). Mutation p.G90D has previously been associated with CSNB based on the examination of one family. This study screened 60 patients. Out of these 60 patients, 32 were affected and a full characterization was conducted in 15 patients. We described the clinical characteristics of these 15 patients (12 male, median age 42 years, range 8–71) from three families including visual field (Campus Goldmann), fundus autofluorescence (FAF), optical coherence tomography (OCT) and electrophysiology. Phenotypes were classified into four categories: CSNB (N = 3, 20%) sector RP (N = 3, 20%), pericentral RP (N = 1, 6.7%) and classic RP (N = 8, 53.3% (8/15)). The phenotypes were not associated with family, sex or age (Kruskal–Wallis, p > 0.05), however, cystoid macular edema (CME) was observed only in one family. Among the subjects reporting nyctalopia, 69% (22/32) were male. The clinical characteristics of the largest p.G90D cohort so far showed a large frequency of progressive retinal degeneration with 53.3% developing RP, contrary to the previous report.     

Development of protease nanobiocatalysts and their application in hydrolysis of sunflower meal protein isolate

In this study, the suitability of fumed silica nanoparticles (FNS) and its derivatives (amino-modified FNS (AFNS), cyanuric chloride-activated AFNS (CCAFNS) and epoxy-modified FNS (GFNS)), for covalent immobilisation of two commercial protease preparations Alcalase^® and Flavourzyme^® was investigated. The highest hydrolytic activities of immobilised preparations were 25 IU g⁻¹ support (Alcalase-GFNS) and 2.95 IU g⁻¹ support (Flavourzyme-CCAFNS). Furthermore, the immobilised preparations showed 43% and 20% of initial specific activities of commercial protease preparations, respectively. Flavourzyme-CCAFNS also exhibited the highest exopeptidase activity of 22.83 L-pNAU g⁻¹ support. Finally, these two nanobiocatalysts were successfully applied for hydrolysis of sunflower meal protein isolate (SMPI), providing two times higher hydrolysis yields in comparison to free enzymes, justifying the applied immobilisation process. Namely, the highest hydrolysis yield (30%) was gained by the sequential hydrolysis with Alcalase-GFNS and Flavourzyme-CCAFNS, which resulted in the formation of small hydrophobic and hydrophilic peptides, ≤5 kDa, confirmed by HPLC analysis and electrophoretic separation.     

The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.     

Cost estimation in road construction using artificial neural network

Neural Computing and Applications - Road construction projects on the territory of the Republic of Croatia are characterized by the overrun of planned costs. The experience of the contractor on...