Characterization of Surface Pretreatments on Al/Li Alloy and Related Mechanical Properties of Polysulfone Adhesive Bonds

An investigation of polysulfone-Al/Li alloy interaction involved single lap shear joints and wedge samples following an FPL etch, sulfuric acid anodization (SAA) and phosphoric acid anodization (PAA). The study of the Al/Li surfaces involved the determination of the elemental composition and morphological features of the pretreated adherend before bonding and following fracture. When polysulfone was either thermally pressed or primed onto the microporous surface, the polysulfone indeed penetrated into the porous oxide and thereby provided a mechanical means of adhesion. The wedge test results for the adherend pretreated by PAA and SAA were superior to those for the FPL etched adherend. The failure path for the FPL etched samples was at the adhesive/oxide interface whereas the failure path for the PAA samples was within the adhesive but with occasional divergence of the crack into the oxide. The porous oxides on Al/Li alloy formed after PAA and SAA treatment were shown to undergo dramatic changes in morphology on short term (< 95 hrs) exposure to 71°C and 100% R.H. environment. The mechanism of failure was due to moisture which caused hydration and subsequent weakening of the surface oxide layer and the bonded joint. Lithium was not surface concentrated in the PAA treated Al/Li alloy as shown by AES depth profiling and therefore the effect of Li on the durability of the bonded alloy is considered minimal.     

Nitroanilines enhancing the holographic data storage characteristics of the 9,10‐phenanthrenequinone‐doped poly(methyl methacrylate) photopolymer

This article describes an approach toward improving the characteristics of a photopolymer for holographic data storage application. The maximum diffraction efficiency (η_max) and dynamic range (M#) of 9,10‐phenanthrenequinone (PQ)‐doped poly(methyl methacrylate; PMMA) both improved significantly after co‐doping with one of three nitroanilines—N,N‐dimethyl‐4‐nitroaniline (DMNA), N‐methyl‐4‐nitroaniline (MNA), and 4‐nitroaniline (pNA). In particular, the value of η_max increased from 38% for the PMMA/PQ system to 72% for the PMMA/PQ/DMNA system (a 1.89‐fold improvement) and the value of M# increased accordingly from 2.7 to 7.3 (a 2.70‐fold improvement). Thus, the holographic data storage characteristics of PMMA/PQ photopolymers can be improved through co‐doping with nitroaniline compounds. We also investigated the mechanism of the nitroaniline‐induced improvement in optical storage performance using proton nuclear magnetic resonance and X‐ray photoelectron spectroscopy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and Characterization of Poly(vinyl alcohol)/Poly(vinyl pyrrolidone)-Iodine Nanofibers with Poloxamer 188 and Chitosan

This study focuses on the fabrication of poly(vinyl alcohol)/ poly(vinyl pyrrolidone)-Iodine nanofibers via electrospinning. Electrospun fibers were characterized by FT-IR, DSC and SEM techniques. DSC results indicated that the thermal stability of nanofibers were improved after the addition of chitosan and poloxamer 188. SEM images showed that the spongiform structure is much more compact and fibrous in the case of added chitosan, with an average fiber diameter of 374 nm, whereas the addition of poloxamer 188 resulted in a more porous and beaded composition, with average fiber diameter of 489 nm.     

Methylglycinediacetic Acid as a New Complexing Agent for Removal of Heavy Metal Ions from Industrial Wastewater

Sorption is a suitable method for the removal of all contaminants in the ionic form, also including heavy metal ions in the presence of complexing agents from different systems. The aim of this study was a comparison of Cu(II), Ni(II), and Pb(II) sorption in the presence of a complexing agent of a new generation on the strongly basic anion exchangers Amberjet 4200, Amberjet 4600, and Purolite A 520E under different chemical conditions. In the investigation, methylglycinediacetic acid (MGDA), patented by BASF The Chemical Company (Germany) and marketed under the brand name Trilon M, was used. It is a strong complexing agent, readily biodegradable in compliance with Organization for Economic Co-operation and Development (OECD) standards. It was found that the sorption efficiency of strongly basic anion exchangers varied, depending on the metal ions concentration, the pH, the contact time, the temperature, and the properties of anion exchangers, that is, their forms. From the determined breakthrough curves, the distribution coefficients and the ion exchange capacities were calculated. Besides, two different kinetic behaviors were tested for the investigated systems. The experimental data fitted using the Langmuir, Freundlich, and Elovich sorption models, were applied to describe the equilibrium isotherms and determine the isotherm constants. The variations of thermodynamic functions were also calculated.     

Plasma deposition of a silicone-like layer for the corrosion protection of magnesium

Magnesium (Mg) and its alloys are widely used for biodegradable implant materials due to their degradability and mechanical properties similar to bone. However, the high corrosion rate and release of hydrogen gas hinder its clinical application. In this study, plasma-polymerization was used to deposit the hexamethyldisiloxane (HMDSO) polymeric films on Mg surface using low temperature radio frequency discharge plasma. The chemical and physical properties of the HMDSO films were characterized by contact angle measurements, field emission scanning electron microscope, and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Contact angle results show that the contact angle and the plasma discharge powers are strongly correlated. ATR-FTIR results indicate that plasma-polymerized HMDSO films have a chemical structure close to polydimethylsiloxane (PDMS). The weight loss test and electrochemical impedance spectroscopy were performed immersion in 0.9% NaCl solution in order to investigate corrosion protective properties of the coating layer. It was found that HMDSO plasma-polymerized coating layer showed good anti-corrosion properties than that of untreated samples. These results that the polymeric films coated on Mg may be potentially applied for clinical use.     

Optimization for allocating the explosive facilities in order to minimize the domino effect using nonlinear programming

Accidents caused by the domino effect in chemical plants or the petrochemical industry are generally more serious than any other accident. But it is difficult to examine the true factor because the domino effect is influenced by many nonlinear factors. The immediate causes of the domino effect are the peak overpressure, flying objects, and flame. Nonlinearity is inherent in all three causes. However, it is believed that a systematic and mathematical approach can minimize the incidence of the domino effect. We considered the case where there were n-explosive facilities in a given arbitrary rectangular facility site. This paper suggests the positions that can minimize the domino effect using a nonlinear approach. The method initiated an arbitrary number of facilities in addition to the original position, and can search for the position to minimize the domino effect. This paper presents a new computer-aided module, MiniFFECT (MINImization of domino eFFECT).     

Fast internal dynamics in polyelectrolyte gels measured by dynamic light scattering

Summary Dynamic light scattering was used to investigate the dynamics of sodium poly(styrene sulfonate) and fully neutralized poly(acrylic acid) gels as a function of the degree of swelling and weight ratio of cross-linking agent. It was shown that the collective diffusion coefficient increases with increasing degree of swelling and that the diffusion coefficient shows stronger concentration dependence than predicted by scaling arguments. For gel samples measured at the swelling equilibrium, the diffusion coefficient increases with increasing gel concentration for both gel systems.     

Application of the concentration-dependent surface diffusion model on the multicomponent fixed-bed adsorption systems

The ability of bone char to adsorb three metal ions, namely, cadmium, copper and zinc, from effluents in fixed beds has been studied. Two binary metal ion sorption systems, Cd+Cu and Cu+Zn, have been investigated. The variables studied include metal ion solution flowrate, initial metal ion concentration, and bone char particle size bed height. The experimental breakthrough curves for each binary system were measured at five bed heights.A multicomponent film-surface diffusion model has been developed to predict the breakthrough curves by incorporating the IAS for both the Langmuir and the Sips equations, since they both correlate the single component equilibrium isotherm data well. A novel development is the modification of the solution methodology, previously restricted to a constant diffusivity, to incorporate a variable diffusivity correlated with adsorbent coverage by the constant self-diffusivity. The self-diffusivities for the metal ions have been evaluated.     

Composite Ni/Al2O3 coatings and their corrosion resistance

Composite coatings Ni/Al₂O₃ were electrochemically deposited from a Watts bath. Al₂O₃ powder with particle diameter below 1 μm was codeposited with the metal. The obtained Ni/Al₂O₃ coatings contained 5-6% by weight of corundum. The structure of the coatings was examined by scanning electron microscopy (SEM). It has been found that the codeposition of Al₂O₃ particles with nickel disturbs the nickel coating's regular surface structure, increasing its microcrystallinity and surface roughness. DC and AC electrochemical tests were carried out on such coatings in a 0.5 M solution of Na₂SO₄ in order to evaluate their corrosion resistance. The potentiodynamic tests showed that the corrosion resistance of composite coating Ni/Al₂O₃ is better than that of the standard nickel coating. After 14 days of exposure the nickel coating corrodes three times faster than the Ni/Al₂O₃ coating. The electrochemical behaviour of the coatings in the corrosive solution was investigated by electrochemical impedance spectroscopy (EIS). An equivalent circuit diagram consisting of two RC electric circuits: one for electrode, nickel corrosion processes and the other for processes causing coating surface blockage, were adopted for the analysis of the impedance spectra. The changes in the charge transfer resistance determined from the impedance measurements are comparable with the changes in corrosion resistance determined from potentiodynamic measurements.     

Real-time risk monitoring system for chemical plants

This study was performed to develop a Real-Time Risk Monitoring System which helps to do fault detection using the information from plant information systems in a chemical process. In this study, to do fault detection, principal component analysis (PCA) methods of multivariate statistical analysis were used. The fundamental notions are a set of variable combinations, that is, detection of principal components which indicate the tendency of variables and operating data. Besides classical statistic process control, PCA can reduce the dimension of variables with monitoring process. Therefore, they are known as suitable methods to treat enormous data composed of many dimensions. The developed Real-Time Risk Monitoring System can analyze and manage the plant information on-line, diagnose causes of abnormality and so prevent major accidents. It’s useful for operators to treat numerous process faults efficiently.