Construction of a Biocompatible and Antioxidant Multilayer Coating by Layer-by-Layer Assembly of κ-Carrageenan and Quercetin Nanoparticles

The present work aimed at the construction and characterization of a multilayer coating based on κ-carrageenan and quercetin-loaded lecithin/chitosan nanoparticles (Np) by the layer-by-layer technique and the evaluation of its antioxidant capacity and potential cytotoxicity in vitro. The multilayered coating was successfully self-assembled, as confirmed by UV-Vis spectroscopy, contact angle, atomic force microscopy (AFM), and scanning electron microscopy (SEM). Multilayered coatings showed to have antioxidant capacity, with a DPPH? radical scavenging activity of 31.32?±?3.13% and a result of the FRAP assay of 799.41?±?95.39 μM of ferrous ion (Fe²⁺) equivalent. These coatings were also shown to be devoid of cell toxicity, as evaluated by determination of nitric oxide production and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test. The alveolar macrophages culture was tested in the presence of the κ-carrageenan/quercetin-Np multilayer coating and showed a cell viability of 91.3?±?9.6%. These results suggest that this multilayered coating is adequate for surfaces modification in view of biomedical and food industry applications.     

Hidden Markov Models for crop recognition in remote sensing image sequences

This work proposes a Hidden Markov Model (HMM) based technique to classify agricultural crops. The method uses HMM to relate the varying spectral response along the crop cycle with plant phenology, for different crop classes, and recognizes different agricultural crops by analyzing their spectral profiles over a sequence of images. The method assigns each image segment to the crop class whose corresponding HMM delivers the highest probability of emitting the observed sequence of spectral values. Experimental analysis was conducted upon a set of 12 co-registered and radiometrically corrected LANDSAT images of region in southeast Brazil, of approximately 124.100 ha, acquired between 2002 and 2004. Reference data was provided by visual classification, validated through extensive field work. The HMM-based method achieved 93% average class accuracy in the identification of the correct crop, being, respectively, 10% and 26% superior to multi-date and single-date alternative approaches applied to the same data set.     

Genetic damage in exfoliated cells of the uterine cervix. Association and interaction between cigarette smoking and progression to malignant transformation?

OBJECTIVE: To determine, through the micronucleus (MN) test, the cytogenetic effects of cigarette smoking on exfoliated cells from the uterine cervix in women with normal smears and women with inflammatory atypia, squamous intraepithelial lesion (SIL) (cervical intraepithelial neoplasia [CIN] 1-3) and cervical cancer. STUDY DESIGN: The study group consisted of 200 women divided into three subgroups: group 1 (n = 116), women periodically undergoing cervical cytology and residents of Salvador-Bahia; group II (n = 57), women residing in S?o Paulo and previously selected because of a possible cytopathologic test positive for such conditions as human papillomavirus infections or malignant or premalignant cervical lesions (CIN 1-3); group III (n = 27), inmates of the Tatuapé Penal Institution, S?o Paulo. All the women underwent cytologic and colposcopic examination, and biopsies were performed on 68 of them. RESULTS: Considering the samples as a whole and using the chi(2) test for rare events, the number of MNs in smokers was significantly greater than in nonsmokers. It was also greater in women with larger exposure to smoking. The occurrence of MN was significantly lower in women with normal smears (smokers and nonsmokers) than in those showing any kind of pathologic alteration. In nonsmokers the occurrence of MN was similar between those with inflammatory atypia (IA) or low grade (L) SIL (CIN 1) and significantly higher in women with more severe lesions or high grade (H) SIL (CIN 2 and 3). Smokers with LSIL (CIN 1) showed a higher number of MNs than nonsmokers with a comparable diagnosis and smokers with IA. No differences were observed when compared with smokers with HSIL (CIN 2 and 3). MN occurrence was not associated with other risk factors for SIL or cancer development, such as age at first coitus, number of sexual partners, multiparity and use of hormonal contraceptives. CONCLUSION: These results suggest that the mutagenic effect of cigarette smoking occurs in cervical cells and that the progression of SIL is associated with increased frequency of chromosomal damage. Moreover, the data suggest that cigarette smoking introduces an additional risk to the progression of low grade LSIL (CIN 1). MN testing would be helpful in monitoring smokers with this kind of lesion.     

Breeding of Philander frenata (Didelphimorphia, Didelphidae) in captivity

STATEMENT OF PROBLEM: Because water sorption of autopolymerizing acrylic reline resins is accompanied by volumetric change, it is a physical property of importance. As residual monomer leaches into the oral fluids and causes tissue irritation, low solubility of these resins is desired. Another requirement is a satisfactory bond between the autopolymerizing acrylic resins and the denture base acrylic resin. PURPOSE: This study compared the water sorption, solubility, and the transverse bond strength of 2 autopolymerizing acrylic resins (Duraliner II and Kooliner) and 1 heat-polymerizing acrylic resin (Lucitone 550). MATERIAL AND METHODS: The water sorption and solubility test was performed as per International Standards Organization Specification No. 1567 for denture base polymers. Bond strengths between the autopolymerizing acrylic resins and the heat-polymerizing acrylic resin were determine with a 3-point loading test made on specimens immersed in distilled water at 37 degrees C for 50 hours and for 30 days. Visual inspection determined whether failures were adhesive or cohesive. RESULTS: Duraliner II acrylic resin showed significantly lower water sorption than Kooliner and Lucitone 550 acrylic resins. No difference was noted in the solubility of all materials. Kooliner acrylic resin demonstrated significantly lower transverse bond strength to denture base acrylic resin and failed adhesively. The failures seen with Duraliner II acrylic resin were primarily cohesive in nature. CONCLUSIONS: Autopolymerizing acrylic reline resins met water sorption and solubility requirements. However, Kooliner acrylic resin demonstrated significantly lower bond strength to denture base acrylic resin.     

Determination of Psoralens in Child Food (Soups and Baby Food) from Brazil by High-performance Liquid Chromatography (HPLC)

Psoralens are considered natural toxins, present in edible plants, which act as protectors against fungi, insects, and herbivores. In this study, an analytical procedure suitable for sample preparation and an HPLC-UV method were developed for the quantification of psoralens in child food (soups and baby food). The samples were lyophilized and 5.00 g of solid was extracted with 25 mL of MeOH:HCl (1000:1), under magnetic stirring at 40 °C for 30 min. Separation was carried out on a C18 column with a mobile phase consisting of acetonitrile (20 to 100%) and water. Spectrophotometric detection with a wavelength of 246 nm was used. The method to determine psoralens in child food showed adequate linearity, repeatability, and accuracy. The limits of detection (LOD) and quantification (LOQ) obtained for psoralens were 0.02 and 0.08 μg g^?1, respectively. The concentrations (minimum–maximum in μg/100 g) of psoralens in the samples ranged from 71.9 to 877.4. The intake of approximately 45-mg psoralen and UVA exposure can result in various skin lesions. Therefore, the results showed that the developed method is simple, fast, and reliable for the determination of psoralens in child food (soups and baby food).     

Partial purification,heat stability and kinetic characterization of the pectinmethylesterase from Brazilian guava,Paluma cultivars

Pectinmethylesterase (PME) was extracted from guava fruit (Psidium guajava L.), cultivar Paluma, by 70% ammonium sulphate saturation and partially purified by gel filtration on Sephadex G100. Gel filtration showed PME isoenzymes with different values of molecular mass. Two samples were examined: concPME (70% saturation by ammonium sulphate) and Iso4 PME (one of the isoforms from gel filtration with the greatest specific activity). Optimum pH of the enzyme (for both samples) was 8.5 and optimum temperature ranged from 75 and 85 °C. The optimum sodium chloride concentration was 0.15 M. The K_M and V_max ranged from 0.32 to 0.23 mg ml⁻¹ and 244 to 53.2 μmol/min, respectively, for concPME and Iso4PME. The activation energies (E_a) were 64.5 and 103 kJ/mol, respectively, for concPME and Iso4PME. Guava PME, cv Paluma, is a very thermostable enzyme, showing great heat stability at all temperatures studied.     

Experiments and Simulations of Laminar Forced Convection With Water–Alumina Nanofluids in Circular Tubes

This work reports fundamental experimental-theoretical research related to heat transfer enhancement in laminar channel flow with nanofluids, which are essentially modifications of the base fluid with the dispersion of metal oxide nanoparticles. The nanofluids were synthesized by a two-step approach, using a dispersant and an ultrasound probe or a ball mill for alumina nanoparticles dispersion within the aqueous media. The theoretical work involves the proposition of an extension of the thermally developing flow model that accounts for the temperature variation of all the thermophysical properties, including viscosity and the consequent variation of the velocity profiles along the thermal entry region. The simulation was performed by making use of mixed symbolic-numerical computation on the Mathematica 7.0 platform and a hybrid numerical-analytical methodology (generalized integral transform technique, GITT) in accurately handling the governing partial differential equations for the heat and fluid flow problem formulation with temperature dependency in the thermophysical properties. Experimental work was also undertaken based on a thermohydraulic circuit built for this purpose, and sample results are presented to verify the proposed model. The aim is to confirm that both the constant properties and temperature-dependent properties models, besides available correlations previously established for ordinary fluids, provide adequate prediction of the heat transfer enhancement observed in laminar forced convection with such nanofluids and within the experimented Reynolds number range.     

A Microstructural and Fractographic Study on the Failure of a Drive Shaft

The automotive industry is one of the most dynamic and competitive segments of the international economy and it has invested considerable resources into the research and development of new components and the improvement of existent pieces. Nonetheless, failures continue to occur, often because of defects in a component. Failure analysis uses several techniques to investigate causes of the defect which led to the failure of a component, equipment, or structure. Usually, these causes are related to the use of inadequate materials, the presence of defects which appear during fabrication or design errors, or improper assembly, maintenance and use. Knowledge about these causes and the correction of such anomalies allow the improvement of the performance of components regarding both efficiency and safety. In this study, the results of the failure analysis of the drive bar of a police car are presented and light optical microscopy and scanning electron microscopy (SEM) results are used to show that the presence of an already existent defect and an unfavorable microstructure led to the occurrence of brittle fracture which caused the premature and catastrophic failure of this component.     

Characterization of cellulose triacetate membranes, produced from sugarcane bagasse, using PEG 600 as additive

Cellulose Acetate (CA) produced from sugarcane bagasse cellulose was used to produce membranes, using poly(ethylene glycol) (PEG 600) as additive. Results showed that PEG 600 was washed out the membranes during the preparation step. Thermal Analysis showed that the temperature of degradation of the membranes increased in 10 °C when PEG 600 was added to the composition, but did not change as more PEG 600 was added in the composition. On the other hand, the crystalline content (%C) of the membranes increased as PEG 600 was added. The addition of PEG 600 also increased the resistance of the membranes to pressure and the pure water flux rate, but membranes produced with PEG 600 content lower than 5% did not present water flux. PEG 600 also increased the coefficient of ion diffusion of the membranes.     

Monitoring of nylon 6,6/carbon fiber composites processing by X‐ray diffraction and thermal analysis

This work reports a study made to obtain carbon fiber/nylon 6,6 prepreg composites by hot‐compression molding. Thermogravimetric analysis (TG) and crystallinity degree determination were carried out to monitor the nylon 6,6 behavior during the different steps of the composite processing. The homogeneity of the carbon fiber/polymer matrix distribution was verified using microscopic analyses and the fiber content was determined by the acid‐digestion method. The results show that the processing parameters employed were adequate, allowing the manufacture of laminates with good texture and an adequate reinforcement/matrix relation (60/40). However, improvements need be done to minimize the pullout effect observed in the tensile specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3114–3119, 2002