Effect of hygrothermal conditioning on compressive strength after impact in carbon fiber/epoxy composites

Carbon fiber-reinforced polymers have been widely applied in structural parts and components in several sectors, in addition to being constantly used in environments with the presence of humidity and high temperatures, which can affect their density, hardness, and rigidity. In this work, the influence of hydrothermal conditioning on carbon fiber (CF)/epoxy composites was investigated using three types of epoxy resin and two different CF fabric reinforcements, that is, plain weave and eight harness satin (8HS) arrangements. The CF/epoxy composites were subjected to compression after impact (CAI) test by 28 and 40 J energy and then exposed to hydrothermal conditioning for 8 weeks. After the CAI tests, the visual analysis of all composites presented microbuckling mechanisms. The composites tested with 40 J energy absorbed only 2% more moisture compared with the other composites, nonimpacted, and tested with 28 J, indicating that the impact damage did not cause delamination between the layers of the composites, which could facilitate the absorption of water. All composites analyzed showed resistance to CAI even after exposure to humidity, with decreases ranging from 2.8% to 23.8% about the unconditioned specimens. The decrease in CAI also shows the influence of the type of epoxy matrix and the arrangement of the CF in fabrics.     

The bug report duplication problem: an exploratory study

Duplicate bug report entries in bug trackers have a negative impact on software maintenance and evolution. This is due, among other factors, to the increased time spent on report analysis and validation, which in some cases takes over 20 min. Therefore, a considerable amount of time is lost in duplicate bug report analysis. In order to understand the possible factors that cause bug report duplication and its impact on software development, this paper presents an exploratory study in which bug tracking data from private and open source projects were analyzed. The results show, for example, that all projects we investigated had duplicate bug reports and a considerable amount of time was wasted by this duplication. Furthermore, features such as project lifetime, staff size, and the number of bug reports do not seem to be significant factors for duplication, while others, such as the submitters’ profile and the number of submitters, do seem to influence the bug report duplication.     

Procedure guideline for myocardial perfusion imaging. Society of Nuclear Medicine

BACKGROUND AND PURPOSE: Parenterally administered MgSO4 is neuroprotective in standard animal models of focal cerebral ischemia and in many other paradigms of brain injury. Previous small clinical trials in stroke patients have explored the safety and tolerability of different infusion regimens. This study was undertaken to optimize the regimen for a multicenter trial. METHODS: Within 24 hours of the onset of clinically diagnosed stroke, patients were randomized to receive placebo or one of three intravenous MgSO4 infusions: a loading infusion of 8, 12, or 16 mmol, followed by 65 mmol over 24 hours. Cardiovascular parameters, serum magnesium concentrations, and blood glucose concentrations were determined. Outcome at 30 and 90 days was recorded. RESULTS: Twenty-five patients were recruited and treated at a mean time of 20 hours after stroke. No tolerability problems were identified. No effects of magnesium on heart rate, blood pressure, or blood glucose were evident. Serum magnesium concentrations rose to target levels most rapidly in the highest loading infusion group and were maintained in all groups for at least 24 hours. CONCLUSIONS: MgSO4 infusions that rapidly elevate the serum magnesium concentration to potentially therapeutic levels are well tolerated and have no major hemodynamic effects in patients with acute stroke. The 16-mmol loading infusion achieved target serum concentrations most rapidly and has been chosen for further trials.     

A fast active linear gate for experiments in nuclear and particle physics

This paper presents an active linear gate that is able to transmit fast pulses with minimum distortion. The gate exhibits switching times better than 3 ns, pedestal, and a feedthrough of 0.3%. In the field of experimental high-energy physics, the gate was successfully used in measuring the speed response of a fast scintillating calorimeter.     

Reactive processing and evaluation of butadiene–styrene copolymer/polyaniline conductive blends

Blending is an important way to obtain materials based on intrinsically conductive polymers and conventional plastics and rubber materials. Much research has been carried out to determine the best performance of materials be used for electrostatic dissipation and electromagnetic interference shielding. Mechanical mixing, codissolution, and in situ polymerization have been used to prepare these materials. The method used depends on the host polymer and its thermal stability and acid attack resistance. Homogeneity and miscibility are properties that should be controlled during blend preparation. In this study, we prepared a conductive thermoplastic elastomer material based on butadiene–styrene copolymer (SBR) and polyaniline (PANI) doped with dodecylbenzene sulfonic acid (DBSA) and poly(styrene sulfonic acid) (PSS). PSS also acted as compatibilizer between PANI and SBR. PANI was doped by reactive processing with DBSA and PSS to produce the conductive complex PANI–DBSA–PSS. This complex was mixed with 90, 70, and 50% (w/w) SBR in a counterrotatory internal mixer. Conductivity tests, swelling studies, thermal analysis, and mechanical property and reflectivity testing were done, and the results show a strong dependence on PANI concentration and the ratio between PANI–DBSA and PSS. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 681–685, 2006     

Power quality events recognition using a SVM-based method

In this paper, a novel SVM-based method for power quality event classification is proposed. A simple approach for feature extraction is introduced, based on the subtraction of the fundamental component from the acquired voltage signal. The resulting signal is presented to a support vector machine for event classification. Results from simulation are presented and compared with two other methods, the OTFR and the LCEC. The proposed method shown an improved performance followed by a reasonable computational cost.     

Photoluminescence of nc-Si:Er thin films obtained by physical and chemical vapour deposition techniques: The effects of microstructure and chemical composition

Erbium doped nanocrystalline silicon (nc-Si:Er) thin films were produced by reactive magnetron rf sputtering and by Er ion implantation into chemical vapor deposited Si films. The structure and chemical composition of films obtained by the two approaches were studied by micro-Raman scattering, spectroscopic ellipsometry and Rutherford backscattering techniques. Variation of deposition parameters was used to deposit films with different crystalline fraction and crystallite size. Photoluminescence measurements revealed a correlation between film microstructure and the Er³⁺ photoluminescence efficiency.     

Effects of Interactions between the Constituents of Chitosan-Edible Films on Their Physical Properties

The main objective of this work was to evaluate the effect of chitosan and plasticizer concentrations and oil presence on the physical and mechanical properties of edible films. The effect of the film constituents and their in-between interactions were studied through the evaluation of permeability, opacity and mechanical properties. The effects of the studied variables (concentrations of chitosan, plasticizer and oil) were analysed according to a 2³ factorial design. Pareto charts were used to identify the most significant factors in the studied properties (water vapour, oxygen and carbon dioxide permeability; opacity; tensile strength; elongation at break and Young’s modulus). When addressing the influence of the interactions between the films’ constituents on the properties above, results show that chitosan and plasticizer concentrations are the most significant factors affecting most of the studied properties, while oil incorporation has shown to be of a great importance in the particular case of transport properties (gas permeability), essentially due to its hydrophobicity. Water vapour permeability values (ranging from 1.62?×?10^?11 to 4.24?×?10^?11 g m^?1 s^?1 Pa^?1) were half of those reported for cellophane films. Also the mechanical properties (tensile strength values from 0.43 to 13.72 MPa and elongation-at-break values from 58.62% to 166.70%) were in the range of those reported for LDPE and HDPE. Based on these results, we recommend the use of 1.5% (w/w) chitosan concentration to produce films, where the oil and plasticizer proportions will have to be adjusted in a case-by-case basis according to the use intended for the material. This work provides a useful guide to the formulation of chitosan-based film-forming solutions for food packaging applications.     

QoS Support for Multi-user Sessions in IP-based Next Generation Networks

A combined control of multimedia quality level, mobility and allocation of network resources is essential for the success of next generation mobile networks. In this context, this article presents the Multi-user Session Control (MUSC) solution to control the quality level of multimedia sessions shared by multiple-users, providing Quality of Service (QoS) mapping and QoS adaptation for those sessions over heterogeneous and mobile networks. MUSC uses the self-organized principle to coordinate QoS mapping and QoS adaptation mechanisms with mobility and resource allocation controllers, allowing the adaptation of a session to the current network conditions and the dynamic selection of the suitable network service class to map the session. MUSC minimizes the blocking probability, optimizes the usage of network resources and keeps sessions with an acceptable quality of experience. MUSC was evaluated in a simulation and in an experimental environment to analyze its convergence time, percentage of session blocking as well as delay, throughput, Peak Signal-to-Noise Ratio (PSNR), Mean Option Scores (MOS) and Structural Similarity Index (SSIM) of sessions in QoS-aware mobile scenarios.