响应面法优化四角蛤蜊糖胺聚糖提取工艺研究

在单因素试验的基础上,利用SAS软件和响应面分析相结合的方法对四角蛤蜊糖胺聚糖的提取工艺进行了优化,通过试验得到了二次多项式回归模型,模型的相关系数R2=0.976 2,该模型能较好的反映各因素与响应值之间的关系。最佳提取工艺的条件是水料比3∶1,酶解时间3.5 h,酶添加量1.0%。在此条件下,糖胺聚糖的提取率可达0.448%。     

Benchmarking of lightweight cryptographic algorithms for wireless IoT networks

Wireless Networks - Cryptographic algorithms that can provide both encryption and authentication are increasingly required in modern security architectures and protocols (e.g. TLS v1.3). Many...     

舰船冷却设备的防腐对策

针对舰船用海水冷却设备的腐蚀情况的调查，提出了 基本的舰用冷却设备的腐蚀控制原则，并论述了电绝缘措施控制电偶腐蚀、非金属复合层保 护、牺牲阳极和外加电流阴极保护等几种防腐方法，实践证明通过对冷却设备采用本文中提 出的防腐措施，可以很好的解决舰船冷却设备的腐蚀防护问题.     

Spatial Charge Separation as the Origin of Anomalous Stark Effect in Fluorous 2D Hybrid Perovskites

2D hybrid perovskites (2DP) are versatile materials, whose electronic and optical properties can be tuned through the nature of the organic cations (even when those are seemingly electronically inert). Here, it is demonstrated that fluorination of the organic ligands yields glassy 2DP materials featuring long‐lived correlated electron–hole pairs. Such states have a marked charge‐transfer character, as revealed by the persistent Stark effect in the form of a second derivative in electroabsorption. Modeling shows that electrostatic effects associated with fluorination, combined with the steric hindrance due to the bulky side groups, drive the formation of spatially dislocated charge pairs with reduced recombination rates. This work enriches and broadens the current knowledge of the photophysics of 2DP, which will hopefully guide synthesis efforts toward novel materials with improved functionalities.     

Systematic Analysis of the Improvements in Magnetic Resonance Microscopy with Ferroelectric Composite Ceramics

The spatial resolution and signal‐to‐noise ratio (SNR) attainable in magnetic resonance microscopy (MRM) are limited by intrinsic probe losses and probe–sample interactions. In this work, the possibility to exceed the SNR of a standard solenoid coil by more than a factor‐of‐two is demonstrated theoretically and experimentally. This improvement is achieved by exciting the first transverse electric mode of a low‐loss ceramic resonator instead of using the quasi‐static field of the metal‐wire solenoid coil. Based on theoretical considerations, a new probe for microscopy at 17 T is developed as a dielectric ring resonator made of ferroelectric/dielectric low‐loss composite ceramics precisely tunable via temperature control. Besides the twofold increase in SNR, compared with the solenoid probe, the proposed ceramic probe does not cause static‐field inhomogeneity and related image distortion.     

Claramines: A New Class Of Broad‐Spectrum Antimicrobial Agents With Bimodal Activity

The emergence of multidrug‐resistant bacteria and pathogens has created an urgent need for the development of new antibiotics. Herein we report our investigations into the broad‐spectrum activity of an easily prepared water‐soluble polyaminosterol compound, namely claramine A1, against both drug‐sensitive and drug‐resistant Gram‐negative and Gram‐positive bacterial strains. We also report its peculiar mechanism of action, which differs from that of all the other well‐known classes of antibiotics, toward Gram‐negative and Gram‐positive bacteria. Given their low cytotoxicity, this class of compounds based on claramine A1 could constitute an effective response to combat the emergence of multidrug‐resistant bacteria and nosocomial diseases.     

直流系统接地故障的自动检测

在发电厂和变电所内，直流系统接地故障的检测，过去一直采用手动方式来完成。这样，既费事又危险。我们研制的直流系统接地自动检测装置不需停电，可自动检测直流系统接地故障。本文介绍了该装置的原理、组成和主要电路。     

On the origin of the blue/green color of blast‐furnace slag‐based materials: Sulfur K‐edge XANES investigation

Slag‐based materials including mortars, concretes, Ca‐geopolymers, etc., are known to display a fascinating blue/green color upon hydration. This specific color is of particular concern in applications where visual esthetics are important. Yet only limited studies have been devoted to this phenomenon so far and its origin remains unexplained. It has sometimes been attributed, without any experimental evidence, to the presence of polysulfur species in the slag. To address the origin of this coloration, sulfur K‐edge X‐ray absorption near edge structure (XANES) spectroscopy was used to investigate the evolution of the speciation of sulfur during slag hydration. Three methods of slag activation were considered: thermal, portland cement, and sodium silicate. The impact of the activation method on the sulfur K‐edge XANES spectrum was examined first. Then, a comparison was made between the XANES of blue and white samples or zones with or without the blue color within the same sample. Independently of the activation route, the blue color was found to be unambiguously related to the presence of a prepeak in the corresponding XANES spectrum. This feature was absent for white samples or white zones. The prepeak, which was located at lower energy than the peak corresponding to the most common reduced sulfur species, was attributed to the presence of the trisulfur radical anion S₃^?. This blue chromophore is known to be at the origin of the deep blue color of the stone lapis lazuli or the ultramarine pigment (derived from lazurite).     

Random laser action of ZnO@mesoporous silicas

ZnO@mesoporous silica nanocomposite was prepared by the impregnation method, and very efficient laser action was highlighted. As revealed by high-resolution transmission electron microscopy (HR-TEM), nanometric ZnO particles are confined inside the mesochannels of CMI-1 mesoporous silicas. Upon excitation at 3.6?eV of a femtosecond pulsed laser and at low pumping intensity, the ZnO@mesoporous silica showed a broad photoluminescence (PL) band corresponding to the excitonic recombination of ZnO. When the pumping intensity is increased up to a threshold (2.5?mJ?cm(-2)), the excitonic emission turns to stimulated emission through a mechanism which will be discussed. The same threshold value was obtained with another excitation source and nanocomposites with different ZnO loadings inside the CMI-1 mesoporous silica. These results allow a better understanding of the random laser effect in ZnO@mesoporous silica and, consequently, a model has been proposed to explain this phenomenon. Based on these new observations, many new applications can be considered since short-wavelength devices are required by industry to design new information storage supports.