Engineering Field Effect Transistors with 2D Semiconducting Channels: Status and Prospects

The continuous miniaturization of field effect transistors (FETs) dictated by Moore's law has enabled continuous enhancement of their performance during the last four decades, allowing the fabrication of more powerful electronic products (e.g., computers and phones). However, as the size of FETs currently approaches interatomic distances, a general performance stagnation is expected, and new strategies to continue the performance enhancement trend are being thoroughly investigated. Among them, the use of 2D semiconducting materials as channels in FETs has raised a lot of interest in both academia and industry. However, after 15 years of intense research on 2D materials, there remain important limitations preventing their integration in solid‐state microelectronic devices. In this work, the main methods developed to fabricate FETs with 2D semiconducting channels are presented, and their scalability and compatibility with the requirements imposed by the semiconductor industry are discussed. The key factors that determine the performance of FETs with 2D semiconducting channels are carefully analyzed, and some recommendations to engineer them are proposed. This report presents a pathway for the integration of 2D semiconducting materials in FETs, and therefore, it may become a useful guide for materials scientists and engineers working in this field.     

Multicluster,mobile, multimedia radio network

A multi-cluster, multi-hop packet radio network architecture for wireless adaptive mobile information systems is presented. The proposed network supports multimedia traffic and relies on both time division and code division access schemes. This radio network is not supported by a wired infrastructure as conventional cellular systems are. Thus, it can be instantly deployed in areas with no infrastructure at all. By using a distributed clustering algorithm, nodes are organized into clusters. The clusterheads act as local coordinators to resolve channel scheduling, perform power measurement/control, maintain time division frame synchronization, and enhance the spatial reuse of time slots and codes. Moreover, to guarantee bandwidth for real time traffic, the architecture supports virtual circuits and allocates bandwidth to circuits at call setup time. The network is scalable to large numbers of nodes, and can handle mobility. Simulation experiments evaluate the performance of the proposed scheme in static and mobile environments.This work was supported by the U.S. Department of Justice/Federal Bureau of Investigation, ARPA/CSTO under Contract J-FBI-93-112 Computer Aided Design of High Performance Wireless Networked Systems.     

Conjugated‐Polymer‐Based Lateral Heterostructures Defined by High‐Resolution Photolithography

Solution processing of polymer semiconductors provides a new paradigm for large‐area electronics manufacturing on flexible substrates, but it also severely restricts the realization of interesting advanced device architectures, such as lateral heterostructures with defined interfaces, which are easily accessible with inorganic materials using photolithography. This is because polymer semiconductors degrade, swell, or dissolve during conventional photoresist processing. Here a versatile, high‐resolution photolithographic method is demonstrated for patterning of polymer semiconductors and exemplify this with high‐performance p‐type and n‐type field‐effect transistors (FETs) in both bottom‐ and top‐gate architectures, as well as ambipolar light‐emitting field‐effect transistors (LEFETs), in which the recombination zone can be pinned at a photolithographically defined lateral heterojunction between two semiconducting polymers. The technique therefore enables the realization of a broad range of novel device architectures while retaining optimum materials performance.     

Municipalities as a Driver for Wireless Broadband Access

Municipalities can form a driving force behind the deployment of new telecom infrastructure. While a telecom operator focuses on direct (financial) profits, a municipality is mainly interested in the social benefits for its inhabitants. In this paper, we evaluate a wireless municipality network from both a technical and an economic point of view. WiFi and WiMAX are considered as the most suited technologies for this purpose. A detailed techno-economic study has been performed including forecasting of the user adoption, dimensioning of the wireless network and modelling the related costs and revenues. The trade-off between installing a high number of relatively cheap WiFi access points, and a smaller number of more expensive WiMAX base stations for delivering full coverage is investigated in several scenarios.

Effects of storage time and chemical preservatives on the total volatile basic nitrogen content in chilean mackerel (Trachurus murphy) prior to fish meal production

Total volatile basic nitrogen (TVB-N) as a measure of protein degradation and total microbial counts or stored raw mackerel (Trachurus murphy), which had been treated with chemical preservatives, were compared with the TVB-N and microbial counts of untreated fish. In unpreserved fish, decomposition of fish protein was rapid. Treatment of mackerel with acetic (1000-5000 μg kg^?1), which was the most effective of the parameters studied, approximately halved the rate of increase in TVB-N compared with the untreated samples. Changes in the total microbial counts presented a similar trend.     

Use of multivariate analysis for the improvement in prediction accuracy of bacterial aerobic plate count by flow cytometry

Flow cytometry (FCM) and aerobic plate count (APC) by the culture method were performed on green tea samples spiked with Escherichia coli type strain NCTC9001 (ATCC11775) solutions of different concentrations. In FCM, fluorescence signals from multiple stained bacteria and other fluorophores are detected using detector channels, and recorded as events with a voltage at each channel. FCM data were analyzed in two ways: conventional and multivariate analysis. In the former, the number of events with voltages larger than the defined threshold values was regarded as the predicted APC. In the latter, voltage histograms of all channels were obtained and merged horizontally to serve as explanatory variables. Then a partial least squares regression (PLSR) model was built to predict APC from the histogram data. The coefficient of determination (R²) and the root mean square error (RMSE) between APC by the culture method and that predicted by conventional FCM were 0.916 and 1.08 cfu/ml². The APC values predicted by the PLSR model and those measured were in good agreement with R² of 0.982 and RMSE of 0.417 cfu/ml, which verified the potential of the proposed method for improving APC prediction accuracy by FCM.     

Novel pearl millet couscous process for West African markets using a low-cost single-screw extruder

Traditional West African pearl millet couscous products are popular; however, their preparation is laborious, time-consuming and energy-demanding, involving agglomeration, steaming, drying and sieving steps. In this study, a process was developed to produce millet couscous using a high pressure, high temperature and low-cost single-screw extruder. The innovation was to directly process the cooked low-moisture extrudate to a couscous product by drying and milling to the appropriate particle size (ranging between 1 and 2 mm). Throughput for the traditional process as prepared for commercial sale is 50 kg per day, but with the same amount of labour, the extrusion process yields ~350 kg per day. A consumer sensory study held in Niamey (Niger) showed that the extruded millet couscous was comparable to traditional couscous, though this was dependent on selection of the proper millet variety. This novel extrusion process could stimulate small- to medium-scale manufacturing of couscous and couscous-type products in West Africa.