Control of grain size and -orientation in multi-crystalline silicon ingots

Two different cooling rates have been imposed during the early solidification of two multi-crystalline silicon ingots with 250mm diameter and 100mm height in a pilot scale directional solidification furnace. This has been done by opening a variable heat leak system below the crucible in order to achieve a high initial cooling rate in one of the ingots. The grain-structure and -orientation of these two ingots have been investigated by light microscopy (LM) and electron backscattered diffraction (EBSD), and their electrical properties by quasi-steady state photo-conductance (QSSPC) and surface photovoltage (SPV) method. The ingot with the high initial cooling rate shows predominantly grains which are significantly larger than what is usually found in mc-Si. The minority carrier diffusion lengths measured on the large grains in the ingot with high cooling rate show higher values than those measured on the ingot with smaller grains. These results indicate that principles of grain size and -orientation control in mc-Si ingots can be applied to a pilot scale furnace, and the potential for up-scaling to industrial ingots with improved electrical properties and, thus, higher solar cell conversion efficiency.     

Characterization, modeling and assessment of Roll-N-Cage isolator using the cable-stayed bridge benchmark

This paper presents the results of an extensive series of simulation tests to identify the mechanical characteristics of an innovative isolation device known as the Roll-N-Cage (RNC) isolator. The seismic performance of an RNC passive control scheme is subsequently investigated on a model of the cable-stayed bridge benchmark. Starting from different configurations studied in the laboratory for a 1/10 reduced-scale prototype, the RNC isolator stiffness and damping properties are investigated in terms of cyclic tests with different parameters. Tests at the ultimate level state consisting of monotonic shear and axial loading have been also carried out as a part of the qualification process. The goal of this study is twofold: first, to examine the main integrated mechanisms of the RNC isolator through sophisticated 3D finite element simulation models using a multi-purpose finite element code. The main result of this step is to attempt modeling the force–displacement relationship using the standard Bouc–Wen model of smooth hysteresis. The second aim of this study is the numerical assessment of the device efficiency through its implementation into a bridge model considering several ground motions as external excitations. Based on these extensive studies, it was found that the RNC isolator is promising as a reliable isotropic horizontal isolation device for bridge structures.     

Main, mediating, and moderating effects of social support on the well-being of survivors of intimate partner violence across 2 years.

Intimate partner violence is a serious and pervasive social problem with deleterious consequences for survivors’ well-being. The current study involved interviewing 160 survivors 6 times over 2 years to examine the role of social support in explaining or buffering these negative psychological consequences. The authors examined both between- and within-persons variability to explore women’s trajectories regarding their experiences of abuse, social support, depression, and quality of life (QOL). Findings revealed the complex role of social support on women’s well-being. Evidence was found for main, mediating, and moderating effects of social support on women’s well-being. First, social support was positively related to QOL and negatively related to depression. Social support also partially explained the effect of baseline level and subsequent change in physical abuse on QOL and depression over time, partially mediated the effects of change in psychological abuse, and moderated the impact of abuse on QOL. The buffering effects of social support were strongest at lower levels of abuse. Implications for future research and intervention are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Computer-aided design of chiral ligands. Part I. Database search methods to identify chiral ligand types for asymmetric reactions

The utility of database searching to identify chiral ligand motifs is outlined. The key elements of three known chiral ligands have been described as bond vectors. The CAVEAT program was then used to screen the Cambridge Structural Database (CSD), portions of the Chemical Abstracts Services three-dimensional database (CAS-3D), and the TRIAD tricyclic structure database for scaffolds containing these elements. Scaffolds corresponding to the known starting points were identified indicating that this method can be used to identify chiral ligand structural motifs. In addition, alternate structural motifs were found that suggested alternative possible ligands.     

Testing the robustness of the job demands-resources model.

[Correction Notice: An erratum for this article was reported in Vol 14(2) of International Journal of Stress Management (see record 2007-07240-008). Several corrections of errata in a paper by the authors published in the 2006 issue of the International Journal of Stress Management are presented: (1) The sentence beginning on page 385, line 16 should read "To avoid identification problems, the error variance of Organizational commitment and Emotional load were constrained using the formula (1 - α) × sigma2." (2) The sentence on page 385, line 18, should be deleted. (3) Degrees of freedom for M3 in Table 2 were incorrectly reported. The correct degrees of freedom were 54. The corrected table is provided.] According to the job demands-resources (JD-R) model, job demands and resources evoke two relatively independent processes: health impairment and employee motivation. The robustness of the JD-R model was tested in two different occupational samples, the first of 654 Spanish employees and the second of 477 Dutch employees. Structural equation modeling analyses provided partial evidence for the two processes. Multigroup analyses showed that the structural paths of the model were invariant across countries, although the strength of the relationships differed. We conclude that the basic structure of the JD-R model is maintained, even when applied in different national and occupational contexts, when using different ways of gathering data (computerized versus paper and pencil), and when using slightly different measures to assess the key variables of the model. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Exploiting transition locality in automatic verification of finite-state concurrent systems

In this paper we show that statistical properties of the transition graph of a system to be verified can be exploited to improve memory or time performances of verification algorithms.We show experimentally that protocols exhibit transition locality. That is, with respect to levels of a breadth-first state space exploration, state transitions tend to be between states belonging to close levels of the transition graph. We support our claim by measuring transition locality for the set of protocols included in the Mur verifier distribution .We present a cache-based verification algorithm that exploits transition locality to decrease memory usage and a disk-based verification algorithm that exploits transition locality to decrease disk read accesses, thus reducing the time overhead due to disk usage. Both algorithms have been implemented within the Mur verifier.Our experimental results show that our cache-based algorithm can typically save more than 40% of memory with an average time penalty of about 50% when using (Mur) bit compression and 100% when using bit compression and hash compaction, whereas our disk-based verification algorithm is typically more than ten times faster than a previously proposed disk-based verification algorithm and, even when using 10% of the memory needed to complete verification, it is only between 40 and 530% (300% on average) slower than (RAM) Mur with enough memory to complete the verification task at hand. Using just 300 MB of memory our disk-based Mur was able to complete verification of a protocol with about 10⁹ reachable states. This would require more than 5 GB of memory using standard Mur .     

The “presence of others” in a virtual environment: different collaborative modalities with hybrid resources

The purpose of this study is to see in which forms and under which conditions social presence turns into collaboration. Eight couples were asked to find some objects in a virtual environment in which collaboration was allowed but not mandatory. The qualitative analysis of the video recordings shows that all participants resorted to collaboration in forms that were justified by the requirements of the task, the environmental affordances and the different expertise.

Direct X-ray observation of lattice parameter changes due to magnetostriction in nickel single crystal

Journal of Materials Science -     

Theory of a tunable fiber ring depolarizer theory

The depolarizing properties of a fiber ring structure have been analyzed, and the analytical solution to the device optimization has been found. The result proves that a tunable fiber ring depolarizer can completely depolarize light for any input state of polarization.