Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.     

Cancer Stem Cells: Biological Functions and Therapeutically Targeting

Almost all tumors are composed of a heterogeneous cell population, making them difficult to treat. A small cancer stem cell population with a low proliferation rate and a high tumorigenic potential is thought to be responsible for cancer development, metastasis and resistance to therapy. Stem cells were reported to be involved in both normal development and carcinogenesis, some molecular mechanisms being common in both processes. No less controversial, stem cells are considered to be important in treatment of malignant diseases both as targets and drug carriers. The efforts to understand the role of different signalling in cancer stem cells requires in depth knowledge about the mechanisms that control their self-renewal, differentiation and malignant potential. The aim of this paper is to discuss insights into cancer stem cells historical background and to provide a brief review of the new therapeutic strategies for targeting cancer stem cells.     

Distribution of Mixing Efficiency in a Split-Cylinder Gas-Lift Bioreactor with Immobilized Yarrowia Lipolytica Cells Used for Olive Oil Mill Wastewater Treatment

The distribution of mixing in a split-cylinder gas-lift bioreactor has been investigated for suspensions of immobilized Yarrowia lipolytica cells with particles diameter varying between 3 and 4.2 mm. The results indicated important variation of mixing time on the height of riser or downcomer, as well as different behavior of suspensions flows in these two regions. Therefore, for the riser, the mixing efficiency increases from its bottom to the top, allowing the biocatalyst particles with intermediate size (3.6-mm diameter) reaching the most intense circulation of suspension. The analysis of the suspension flow in the downcomer region revealed that the intermediate positions are associated with the highest mixing mainly for the largest immobilized yeast particles (4.2-mm diameter). In both cases, the influence of aeration on turbulence extent is positive only for air superficial velocity up to 1.05–1.35 × 10^?3 m/s, the magnitude of this effect being correlated with the biocatalyst size and position on the riser or downcomer. By means of the experimental data, mathematical correlations for mixing time have been proposed for each circulation region, taking into consideration both the operational parameters and the distance from the bioreactor bottom. These equations offer a good concordance with the experiment, the average deviation being of 5.82% for the riser and 6.06% for the downcomer zone.     

Ultrasonic Fabrication of Polymer Plate Reactors with a Surface Coating

Microreactors offer several advantages compared to the industrial scale when developing new chemical processes. Especially the production and investment costs are low if polymer microreactors are generated by ultrasonic processes. In order to observe the chemical reaction and the flow configuration, these microreactors need to be optically transparent, mechanically stable, and chemically inert to several reagents. The manufacturing process of a transparent polymer plate reactor with a chemically inert surface coating by ultrasonic fabrication is described. Experimental characterization of the microreactors showed that they are leak tight up to a pressure difference of at least 300 kPa and the mixing times are in the range of milliseconds.     

Ultraviolet photodetectors and readout based on a-IGZO semiconductor technology

In this work, real-time ultraviolet photodetectors are realized through metal–semiconductor–metal (MSM) structures. Amorphous indium gallium zinc oxide (a-IGZO) is used as semiconductor material and gold as metal electrodes. The readout of an individual sensor is implemented by a transimpedance amplifier (TIA) consisting of an all-enhancement a-IGZO thin-film transistor (TFT) operational amplifier and a switched capacitor (SC) as feedback resistance. The photosensor and the transimpedance amplifier are both manufactured on glass substrates. The measured photosensor possesses a high responsivity R , a low response time t _{R E S} , and a good noise equivalent power value NEP .     

Securing Wireless Mesh Networks

Now found in domestic, commercial, industrial, military, and healthcare applications, wireless networks are becoming ubiquitous. Wireless mesh networks (WMNs) combine the robustness and performance of conventional infrastructure networks with the large service area and self-organizing and self-healing properties of mobile ad hoc networks. In this article, the authors consider the problem of ensuring security in WMNs, introduce the IEEE 802.11s draft standard, and discuss the open security threats faced at the network and data-link layers.     

Optimization of a plate with holes

We consider a simply supported plate with constant thickness, defined on an unknown multiply connected domain. We optimize its shape according to some given performance functional. Our method is of fixed domain type, easy to be implemented, based on a fictitious domain approach and the control variational method. The algorithm that we introduce is of gradient type and performs simultaneous topological and boundary variations. Numerical experiments are also included and show its efficiency.